Microkorg Tutorial (Using a Guitar with the Vocoder)

www.richardhou...
richardhoughte...
Spotify
open.spotify.c...
p. 34 From the Microkorg Owners Manual
Using an external input as the carrier of the vocoder
1. connect the included mic to the AUDIO 1 CONDENSER jack, and connect the output jack of your external device to the AUDIO IN 2 LINE jack. Use the VOLUME 1 and Volume 2 knobs to adjust the levels so that the audio signals are output to AUDIO IN 1 and 2
2 When you raise the MIXER "INST LEVEL" (knob 2) value, the input signal from AUDIO IN 2 will be input to the band pass filter (synthesis filter) of the carrier.
3. When you raise the MIXER "OSC 1 LEVEL" (knob 1) and play the keyboard, the OSC 1 waveform will be input to the the band pass filter of the carrier
4. If you set the AUDIO IN 1 "HPF GATE" (knob 4) to Disable (DIS), the high frequency portion of the input signal from the AUDIO In 1 jack will also be output.
Have FUN!
~Richard