Microwave Not Heating?

Microwave primo mg4 not heating? if your microwave functions correctly but not heating? then there some few parts to check
1)unplug the microwave from the power line,
2)discharge the capacitor with isolated tools.
3)check the network of HIGH volt parts (transformer, capacitor, fuse, diode, Megatron)
after fixing or while fixing make sure you put the cover back, avoid any exposure from the MEGATRON (RADIATIONS)
3)change the broken parts with exactly the same spare parts

[@jonathanskateurban1079]

Great work 👍

[@juniorelectronics8255]

thank you ,for taking your time to watch

[@euginesinkala1607]

So now how to be sure that capacitor has been discharged is there not be any testing to check if it's discharged

[@juniorelectronics8255]

the best way is to always taste with a voltmeter !! to make sure the capacitor has been completelly discharged

[@krishnaidoo6221]

@@juniorelectronics8255 But then one would require a high voltage meter. That capacitor carries 6000Volts. A normal meter that you are using will blow up.

[@erickrivas48]

If the turntable has a not working and not heat the problem will be the fuse?

[@juniorelectronics8255]

@erickrivas48 if the turn table not turning properly the motor is not getting the power, those motor don't get easily damaged. The fuse is for turning higher power. I recommend to keep looking..

[@erickrivas48]

@@juniorelectronics8255 thank you.!!!

[@collinspereira1090]

What can be the problem if the furse is okay but once turned on the transformer starts producing smoke

[@juniorelectronics8255]

if the transformer produces smoke, the isolated material of the wires of the transfer has been burned out

[@irishguy200007]

Darn Megatron is everywhere.

[@irishguy200007]

Did it keep working?

[@dadasamuel7909]

What if the fuse is good,, what will be the fault now

[@juniorelectronics8255]

good questions, the best way to diagnose the problems is to follow the power directions step by step, if the fuse is good then I will check the power that comes out of the capacitor through the fuse to the transformer, this way you can see if the transformer is burned or not

[@cammysimon8578]

Actually the main feed from the plug is coming from the capacitor to the transformer or from the transformer to capacitor?

[@elmbaker1683]

I don't think you solved the real problem cause the fuse will blow again. You have to identify why the fuse blew and correct that first.

[@krishnaidoo6221]

Yes, all the components must be tested.

[@wans9682]

Megatron or magnetron 😅😅