MIDAS M32 Digital Console for Live and Studio

In this video we show you the M32, a Digital Console for Live and Studio with 40 Input Channels, 32 MIDAS Microphone Preamplifiers and 25 Mix Buses.

[@arturoriveroverdecia2331]

I will love to see some vídeos like this one with more details about studio recording settings and power of the m32

[@natioffline]

Thank you very much for the explanation

[@SuperRockindoc]

While the functionality is almost the same as the Behringer X32 I like the way that the controls and LCD screen at the back of the Midas mixer are tilted up towards the engineer. The Behringer’s controls and LCD screen are flat, forcing you to lean over the mixer to see and adjust parameters using those controls and LCD screen.

[@neonwilliams5300]

I'm inclined to agree with you...pun intended!

[@shayneoneill1506]

I suspect, being that they are the same company, the X32 is basically a budget version of this. But I suspect if you take the top of , the electronics will be more or less the same, maybe better tolerances on the parts (although that might be my old engineer brain thinking, I dont even know if "tolerances" are even a consideration in the era of surface mount electronics, still Midas always made nice pre's so I'd be interested to see whats the difference between the two other than aesthetics)

[@asilva_media]

the faders are actually a lot different i think

[@simou9957]

My school is getting one of thesse I cant wait

[@mubinsolkar1779]

Very nice mixer

[@drkelz1006]

i love midas mixer and am going for it for my studio..

[@abukamara3765]

This is good for a radio station

[@takaliuang]

Any video to explain how to record to DAw and playback through USB?

[@mikeswiff1]

can I daisy chain 2 DL 32 stageboxes together with the M32?

[@ReeOnTheBeat]

Could you explain how I could use multiple pieces of hardware at the same time? I understand the function of choosing aux one for the channel you’re on I don’t understand how to route multiple pieces of gear

[@12notesproduction]

work with cubase and logic daw with this one?

[@leejack1332]

How can i turn on the 48V to connect a conderser MIC, why it doesn's work?

[@KenGayJr]

How many channels of HUI/Mackie control? Thx

[@maizesoft]

does this have an internal talkback mic like X32?

[@Xtn1Insecticide]

Can it sum out a live mix of a recording session or do I have to go through an analog desk to do that?

[@GPram6]

m32 can connect with x32 rack using dl32 ?

[@lucianogm]

Hi! How can i set the stereo busses stock compressors to react as dual mono?

[@javierdominguez7579]

how muchit this digital console in california US, it actual date May/20/2017 ?

[@maizesoft]

is there an internal.talkback mic?

[@soundengineer9431]

How will get board on fader option??

[@AzadTelecast]

Thanks

[@ernestoremigio1158]

por piedad lo mismo pero en español y porfavor trucos y rutas de como facilitar y aprovechar al maximo la midas mil gracias

[@baonguyen-sn3gu]

Rất mong nhà sản xuất làm clip hướng dẫn có phụ đề tiếng Việt !

[@gersonsalcedo]

Touch screen is a good idea

[@DjAjayUp75]

Nycc

[@msaintpc]

Lol, it'll take me about 39 years to learn how to operate it.

[@ekkortrijk4456]

howto implement tc helicon voicetone c1 (singer) without passing this manipulated voice through in-ear

[@bustabrowne196]

Is there a vegas mode or fader test calibration on it?What buttons do you push to start it?

[@MidasOfficial]

Hi Busta, no "Vegas mode" or calibration setting. For more technical question, please contact our CARE team at [e-mail]

[@AudioTones67]

Looking at the DL16 stagebox, wouldn't it make sense for the higher end stageboxes to have their connectors on the front as well?

[@TimmyP1955]

+Anthony Bowe Many if not most users of the high end boxes have a connector panel on the rack, so that the stagebox connectors aren't the ones that get worn or broken over time. Such panels often have multipins such as Whirlwind W1 (12 pair) or W2 (20 pair) for more efficient connection of subsnakes.

[@AudioTones67]

I did think that would be a better solution than plugging/unplugging at your expensive stagebox constantly.

[@tecno8335]

Can you use the other 8 faders for daw, so you can have a 24 fader daw controller? I think that's what alot of people wanna know.

[@MidasOfficial]

Hi Rob, yes you can! Head to page 49 of the manual for more information: downloads.music-group.com/documents/midas/M32_M_EN.pdf

[@FrancisJoa]

@@MidasOfficial Can plugins be installed from third party software manufactures on this desk like it can be done on an Avid Venue console?

[@flamesgatherasfamily3661]

kindly show video where can we physically inputs the channel 17-32 in m32r

[@MidasOfficial]

This video should help: kzbin.info/www/bejne/fInCqYGngNWFotU

[@ronirama8352]

Anyone know if this is better than studio Live III?

[@underpressureman]

are effects on the console latency free when recording or using live, or does it depend on your computer?

[@norman7535]

Console effect is ~2ms, on your computer (waves multitrack) it depend on your computer

[@PeterReesvan]

In what resolution does it record? Does it support 24 bit 96 khz? Does it support mackie control on all 24 faders and the pan pots? Does it support mackie machine control?

[@MidasOfficial]

Hi Peter M32/M32-Live families can switch sample rate between 44,1k and 48k. Thus 96k is not possible. However 24bits are - as this is a word length that console uses. Regarding MCU - it is possible - however, it's best to check Your requirements with manual - M32 User Manual (website available) - p. 49

[@user-gd8mk8si9u]

I want to learn how to operate digital mixer

[@signossonorizaciones5894]

quisiera que lo tradujeran al español o a los que tenemos una midas en mexico nos llegara la informacion en español para sacarle mas probecho a esta maravillosa mixer

[@javiertiburcio4158]

Hola si quieres información escríbeme [e-mail]

[@rensinghtsi4439]

Hiii super

[@uptownphotography]

Is there a way to do multi-track recording (old school) which would need tape returns? Many of my clients still like the analog recorder and I am trying to figure how I would set this up for multi-tracking and also a mix down. Thanks and great console. Hope there's a way to do this.....

[@jouebien]

You'd be able to do that with 16 channels. 16 analog in(ch1-16), 16 tape returns in(ch17-32) and 16 out to tap over the 16 programmable buses.

[@gospelsparky]

Wow, the level of illiteracy in this comment section is truly remarkable.

[@Superseanbarry]

Will this work as a control surface for DAWs? Thanx.

[@MidasOfficial]

Hi Sean, yes it will

[@rrho170]

This things inability to AFL or PFL solo per channel is a deal killer for us. Asked for it a s a feature request, maybe one day.

[@waechet1]

Hello, if i were to tap the output of the mixer signal to the DSLR camera for the purpose of live streaming, any idea if this can be done with this mixer? we have one in our sanctuary. tq.

[@MidasOfficial]

Hi, yes you can do this with the m32

[@MidasOfficial]

the best option is to send a matrix mix (derived from the stereo bus). This can be routed from the rear xlr, jack or rca

[@juvenalcastillo45]

I update my m32 from x32 my cuestión if the s32 works with m32???

[@jobelewis6416]

Juvenal Arellano yep, I do this

[@KevinNeon]

I have the exact same model.input 2 mics and 1 phone as playback for minus one. im sending main output to my mac for recording. I have 2 ps15 speakers to use as monitor. during recording, I prefer only to listen to playback and I dont want to put on headphone.could you show me how can i have the option of 1)playback only 2)vocals only 3)playback and vocal using the speakers. thanks

[@MidasOfficial]

Hi Kevin, I'm assuming the connection to the mac is via usb and it is this you are referring to as playback? If so, soloing this return channel will enable you to hear the playback via monitors. Be sure to link the monitors via the monitor/control room out sockets. Change monitor settings to AFL (After fade listen) if you want to hear the sound post EQ and fader. Isolating the vocals would have to be done via the DAW (recording software you are using). This would need to be setup so direct monitoring is enabled. Once this is done you can solo the vocal track on the computer - which will only hear the vocal through the playback return of the desk. A 3rd option is to route multiple channels out of the DAW to the desk. But that would require setup in the DAW. You could have separate channels for vocals and playback. Hope this helps

[@KevinNeon]

@@MidasOfficial my apologies, i should have been more detail. Input connecting to mixer include 2 mics, 1 mac for sound effects and a phone to play minus one. I am not using DAW because I'm doing live stream not recording. I am using OBS. I want to control all audio from mixer and master output sent to mac(the same mac for sound effect) through audio interface(USB connection). I am using 2 speakers as monitor and I wish to have these option on the speakers 1) mics, minus one and sound effects 2) minus one and sound effects only. appreciate your reply

[@MidasOfficial]

@@KevinNeon If the speakers are used to simply cue and check the audio source is correct, this can be done using the solo bus. When pressed this will override what you hear with the connected monitors when solo is deselected (normally set to LR) - also bear in mind this will not affect the source to OBS. If the option (last) is de-selected in the monitor menu you can solo any number of the required channels you need (i.e. minus one, sfx and mics if necessary. In order to hear them in mix context, set channel and mixbus solo to AFL however I can't think of a solution to hear the selected channels post master output without destructing the send to OBS

[@gregaroller]

noticed only one studio monitor out? most studios have at least a big and small set of speakers and I flip between them alot. I this a problem? thanks

[@jouebien]

Because 6 matrix buses are included which achieve the same thing.

[@davidgraham3162]

Is the M32 compatible with Waves MultiRack?

[@MidasOfficial]

It is! You can use the built-in DN32-USB card and use Waves MultiRack Native or you can install our DN32-MADI card and use a Waves MGB/MGO MADI to Soundgrid interface. Many options.

[@drkelz1006]

i think so

[@markhanson1452]

It is with the sound grid but your signal goes through that first then to your m32.

[@MadelnMachines]

I saw on the Midas website the M32 and the M32 Live. What is the difference or are they exactly the same? Is the USB recording function 32 or 40 separate channels or just a stereo channel?

[@yashpuri6982]

Midas I bought the M32 but I don't know how to use it so tell me the value of my Console is 5.5 lakhs Please help me

[@ShaneTMcClure]

How many XLR channels are there?

[@noname10707]

Shane Austin 32 in and 16 out

[@JJDPROMEDIAPRODUCTION]

So, the firewire option is no longer available?

[@mangalram4000]

JJDPRO MEDIAPRODUCTION in I'm

[@samuelthorogood3878]

because firewire is rubbish and is being phased out

[@jsgll...godgunsliberty1197]

Now I know were the Heritage D comes from. . .

[@azmitaentertainment3236]

Bos 👍👍👍👍

[@immanueltetteh6232]

#Midas .I am a user of this great board. Currently we've been trying to multi-track our service but truth is , we've downloaded the application from the midas page onto our Windows but it still would not see the mixer board on the PC . We've followed every single step and it didn't result into anything we wanted to see . So can you please help us with it ?

[@shayneoneill1506]

Did you ever solve this?

[@immanueltetteh6232]

@@shayneoneill1506 i realized the USB card is spoilt sir .i kept trying and finding ways to solve it but i found it is the card.

[@unknownpeople6304]

Its same x32?

[@santiagorodriguez2127]

AZ Animation i got the x32, preamps, software and funtions are exactly the same, M32 has better hardware.

[@abinashrao5145]

Please help me i want to khow how i can record multi track through fl studio please reply me soon....

[@MidasOfficial]

Hi Abinash, please email [e-mail] our specialist staff will talk you through it

[@MrMundo3d]

can it work with Pro tools

[@MidasOfficial]

Yes! The M32 can function as both a 32/32 audio interface as well as a control surface for ProTools.

[@tecno8335]

Can you use the other 8 faders for daw, so you can have a 24 fader daw controller? I think that's what alot of people wanna know.

[@renebotones]

How can i send reverb to monitor mix thanks

[@cera3563]

Select your bus on the center section of the console, hit sends on faders, go to your aux returns, turn the fader up.

[@sannadeesounds.sapumal4468]

Im from sri lanka.can i buy this

[@MidasOfficial]

Hi Sumapal, yes you can by from JAT TECHNOLOGIES PVT LTD 351 Pannipitiya Road Thalawathugoda Sri Lanka 10116 [phone]

[@Gopal-parajuli]

How much?

[@ronirama8352]

binisha official u 4000$ I know for sure Check SweetWater

[@yassindj1339]

i hope that the explanation will be in arabic

[@agork]

Why? Your english is great!

[@soundwave2007]

so much the same with X32

[@cera3563]

Biggest difference is that it doesn't sound cheap.

[@JJDPROMEDIAPRODUCTION]

Are you saying that the X32 sounds Cheap?

[@cera3563]

JJDPRO MEDIAPRODUCTION yes that is what I am saying. I however didn't say you can't get a good sound out of it. The front end of an m32 over an x32 is a night and day difference though

[@Zazquatch1]

No touch screen??? Looking better than the x32, and that it has (officially) better preamps, otherwise the same as x32 ???

[@djslidedjslide]

Low Light 8

[@lukeshkumar6772]

Price in India

[@MidasOfficial]

Hi Lukesh, please visit www.alphatec.co.in for the best price in your country. Thanks

[@bryanrugo1452]

Do you have Facebook page???

[@MidasOfficial]

Hi Bryan we have a brand new Facebook page - you can find it here facebook.com/midasconsoles.official/

[@bryanrugo1452]

Thank you so much 👍

[@waqarchishti2108]

Mixar pariez

[@deadsilent2761]

Very expensive 4,999$

[@Savageambassador]

HÃ MØ it's worth it 100% tho

[@george78779]

MIASS

[@jacobmorgenstein6788]

Background music is useless !!!

[@samgertau]

they do NOT say whether or not this can be used in a professional recording studio as people do need to know this .

[@samuelthorogood3878]

yes it can. its fairly obvious to someone give then functions listed whether it would be suitable in their studio

[@jmmmnliberal8274]

Where do I plug in a fucking guitar or keyboard so I can record actual instruments? ALl these mixing consoles all have the same problem..they all think I have 20 mics that I'm looking to plug in because I have every drum part mic'd. I dont need more then two or 3 inputs for vocal mics. The rest I need for 1/4 jacks for instruments

[@knowiz8071]

you need a DI Box to convert 1/4 inch Jacks to balanced xlr and plug into any channel.

[@PSW211]

"In this video we show you the M32" - NEGATIVE! - In this video you primarily show us "Eric"

[@avinashkurup2587]

Guy pls stop it X32 & M32 both are same the changes is only the colour and look in India all the techrider it say this x32 & m32 is not allowed for FOH n Mon Stop fooling money sir please

[@oops9070]

Wilson Kurup bruh.....