In this quick tip video, we show you how to patch an internal 31-band Graphic Equaliser to a MixBus on the M32 Digital Console. For more information, please visit: www.midasconsoles.com/Products...
Пікірлер: 30
@QuicksilverSG6 жыл бұрын
Thanks, this video totally makes the case for investing in a rack full of hardware GEQ's for hands-on spectral control of your FOH and monitor sends.
@saucyjackattak5 жыл бұрын
Cuz your a fokkin idiot?
@ahmadpuji93786 жыл бұрын
When change mix bus from fx 4 can be insert graphic eq.
@lehongsonmusic2 жыл бұрын
Thank you so much! ❤️❤️❤️
@fabricejuniorbatouan80469 жыл бұрын
hello we need please to recieve al this and the manual of M32 in french thank's!!
@Nicholae0066 жыл бұрын
Thanks for the video! Could it be made possible to daisy chain a second insert to the mains? I would love to compress the mix with the LA2A but dont want to sacrifice the graphic eq.
@NameNaameNameeNaamee5 жыл бұрын
Yes. Send the LR to a matrix and insert the GEQ or LA2A there.
@rickyrobinson1255 Жыл бұрын
By inserting a geq on L&R main or a buss, aux send will that cause latency, destructive offset, comb filtering?
@PaulCherian Жыл бұрын
is it possible to apply thesame more than 8 buses?
@ManuelHernandez-br6dy11 ай бұрын
So when we send it on the monitor sends, does that mean that we can apply it to the input channels? Or no? For example eq a mic with it? And also I can’t seem to get the rta to work on it?
@giserkevermeulen1678 жыл бұрын
If you insert a stereo GEQ to lets say Mixbus 1&2, can you use these 2 groups as separated monitor groups?
@NameNaameNameeNaamee5 жыл бұрын
Yes, but you will have no independent control over the GEQ. If you want that, choose the Dual EQ.
@TangDynasty19838 жыл бұрын
Nice video, so there's no in-line EQ built in for the outputs? If we do EQ like the way the video show, we are losing effect engines that we can use for something else.
@skent8 жыл бұрын
+Apache Cai Every channel has its own 4-band EQ with separate low cut, and every mix bus and matrix has its own 6-band EQ. Video is just showing how to use the 31-band GEQ as a channel insert.
@TangDynasty19838 жыл бұрын
+Sean Kent Thank you, Sean. Normally do you prefer running EQ with in-line method or insert method, for the outputs?
@skent8 жыл бұрын
A combination. EQ each channel in line but also use an insert EQ for main LR.
@TangDynasty19838 жыл бұрын
+Sean Kent Sorry, last question. Why not use inline EQ (6 band EQ) for main LR? What's the difference? Thanks again.
@paulfergonise80088 жыл бұрын
+Apache Cai A parametric eq sounds a lot more natural than a graphics eq. It isn't right or wrong to use one or the other but you may use them for different jobs. For instance, I like to use both, a parametric scoops out frequencies in a much smoother way, where as, a graphics eq literally only pulls out that one specific frequency that you choose, which helps when eliminating feedback in the PA. Hope this helps!
@RiponLive1998 Жыл бұрын
My Midas mixer is locked what to do now??? Any options??
@rajeshrajbhavan71186 жыл бұрын
hai ,,,,I m rajesh,,,,,how to insert EQ rack 1,,,,,in midas m32
@NameNaameNameeNaamee5 жыл бұрын
Set both send paths to insert, then go to the channel or bus you want to insert the GEQ, go to config and select rack one L or R, press insert and you are done.
@BjorgenEatinger4 жыл бұрын
This must be an old video, as this setup is exactly the way the board is shipped.
@MrStubat8 жыл бұрын
Why aren't there just 1/3 octave eqs assigned to L/R and the busses by default. Sorry but parametrics do not cut it for tuning monitors and FOH. Never have, never will. Looks like you're eating up f/X engines to get something which is basically essential. FWIW I've been making my living from live sound for over 35 years, so I understand graphic vs parametric. Hear an 8k feed in a monitor mid show you do not want to be piddling around with a parametric.
@jobelewis64165 жыл бұрын
MrStubat exactly what I thought. It’s nice to have 8 effects engines, it’s not nice to waste them straight off the bat
@TheRealNewBlackMusic9 жыл бұрын
we were thinking about upgrading from our x32 to the midas m32 but jeez why won't you guys make a true recording mixer. there are just too many annoying work arounds when using these consoles in the studio. if the m32 had direct channel outs and spdif input or easily recording the channel strip effects and other things we need in the studio it would be killer. oh well guess you can't have everything.
@bigboss1129 жыл бұрын
+nublackmusic The M32 wasn't built for studio its more geared to live sound.
@NameNaameNameeNaamee5 жыл бұрын
@ nublackmusic: It has all that.
@hellofx2 ай бұрын
What a lame way just to use GEQ on the console bc all X air series you can choose GEQ instantly on every channels including mixbus and main LR without having to patch anything . . .stupid design.