Suzuki Vinson / Arctic Cat 500 - Complete Engine Tear Down Motor Explained - Specs

[@normankaster917]

Is the starter clutch on this engine the same as a 2001 artic cat 500 Auto Green 4x4.... Mine has a high pitch screeching when i try to start it i need to figure out what is going on i can't be pull starting this thing. I just had cervical spinal fusion and i don't want to be pulling on this thing come this winter.

[@johnrappa9096]

I am watching this. I also have one of these machines. less than 300 miles. it didn't run for years. I changed the oil, filter and anything else i could change. flushed the gas tank and carb and it started right up. it ran for a few days made this high pitch screech and shut down. I'm looking to replace the motor.

[@normankaster917]

@@johnrappa9096 my starter motor was full of black powdery residue after I took the end cap off to check the brushes, so I cleaned everything out with electric contact cleaner, put the case back together with a little grease on the end of the shaft and no more screaming when trying to start it.

[@RobertJones-vm9mc]

I have a 2005 Suzuki Vinson 500 automatic. Is the gear position sensor behind the belt box cover behind the belt and clutch? It looks like it

[@MidNebraskaMotorsports]

I believe you are correct in that. Check out our Vinson videos and you will find your answer. Thanks for watching and the question. Check out: www.ebay.com/str/midnebraskamotorsports if you need parts.

[@justinrutgers4315]

If I was to just inspect trans portion and shafts do I still need flywheel removed

[@fistcover3831]

Can you recommend a good Utility quad worth restoring? Something 400cc or bigger?? I'm a big fan of the King Quad and Grizzlys btw. Thanks Great videos btw. I really appreciate how detailed you are with the tear down projects.

[@MidNebraskaMotorsports]

Love it. the Honda foreman 400 and 450 are good older machines worth putting a little money in. Check out: kzbin.info/www/bejne/mJSThISBbq6bqK8

[@scottbarnes-vu6bp]

If I used a generic flywheel puller, would that work instead of buying that special tool to pull it?

[@JamesClark-mk8kk]

No thats how people damage the crank.

[@MidNebraskaMotorsports]

I agree with you. DON'T go for the generic puller on a $800 flywheel! Thanks for watching and the comment. Hit that subscribe button, if you will. www.ebay.com/str/midnebraskamotorsports