Рет қаралды 6,750
Sorry about the lighting my led light I used to use decided to fall of WTG while i was working on something and snapped in half one day in my shed and still need to get a new better quality one 🙃
Washing a load of mixed general wear and my stained repair clothes with Spanish Ariel extra power liquid and Spanish frescor azul softener
I know quite a few of you have missed seeing the W1 so thought I may as well film a new full cycle in it
I turned powerwash 2.0 back on around a month or 2 ago as I was finding the sensing was very limited with it off. It only sensed on 3 cycles with only 2 levels on cottons and automatic and 3 levels on eco 40-60 so I thought I’d turn it back on and see what it was like and I’ve fully adapted to the technique and truthfully I shockingly love it 😨
With the controlled energy consumption on the wash temperatures are all adjusted by the machine. 40°C can be 30-50, 60°C can be 50-65 you get the jist. It’s normally something I can’t stand in a washer as we saw with the Samsung I used to have but as this machine has multiple ways to prevent this you have some sort if control over it whereas with the Samsung for example it done whatever it felt and you where stuck with it like that.
In the 2 months I’ve had it on the jet has only ran completely dry on one or 2 cycles but even when it did run completely dry it still removed stains from clothes 😱 don’t ask me how but soil dilution sure can be amazing 🥹
This load contained an outfit I wore while disassembling the old Miele Professionals drum so was covered in rust and also powdery limescale the W1 still managed to remove every stain despite using such little water
Unfortunately the final spin limited to 1200rpm I feel the machine can limit the spin way too fast especially on shorter washes like quickpowerwash and cottons quick. It’s even worse when it has no burst on the final spin. I’ll happily take 1200rpm over 800rpm though 😂
0:00 Prepare the load
4:19 Main wash (fill and load sensing spin&spray 700rpm unbalanced)
6:08 Main wash (load sensed, time reduced and begin saturation with spin&sprays max 500rpm)
14:12 Main wash (final top up and spraying excess water onto load)
16:13 Main wash (drain excess water)
16:38 Main wash (fill using flow meter and begin heating with powerwash 2.0 method)
46:07 Main wash (intermittent powerwash)
59:05 Main wash (soil dilution stage)
1:07:06 First interm spin 800rpm
1:10:56 First rinse
1:15:57 Second interm spin 800rpm (unbalanced)
1:19:44 Final rinse (with powerwash)
1:25:44 Final spin 1200rpm (limited unbalanced)
1:36:47 Anti crease
1:36:59 End and results
Total energy was 0.5kwh and total water was 32 litres