DIY Gutter Vacuum - Easy and Safe Gutter Cleaning from the Ground

  Рет қаралды 1,305,537

Mike attempts

Mike attempts

Күн бұрын

Пікірлер: 1 000
@Mikeattempts
@Mikeattempts 5 жыл бұрын
Central Vacuum Tubing: www.homedepot.com/p/100155184 -OR amzn.to/3dJr9Ci (affiliate*) 90 Degree Long Sweep Elbow (x2): www.homedepot.com/p/202195581 -OR amzn.to/2WYPwpC (affiliate*) Black ABS Pipe: www.homedepot.com/p/202300519 -OR amzn.to/3bM9GYp (affiliate*) Wet/Dry Vac: www.homedepot.com/p/304006023 PVC Cement: www.homedepot.com/p/203477293 -OR amzn.to/3yz63jw (affiliate*) Hacksaw: amzn.to/2wRlRUQ (affiliate*) Miter Box: amzn.to/2WWmGX6 (affiliate*) *Purchasing from these Amazon affiliate links earns my channel a small commission. Think of it as a tip that doesn't cost you anything. Thanks for the support!
@arthurahrens3216
@arthurahrens3216 5 жыл бұрын
Home Depot no longer offers the Nutone 3808 and I could not locate any schedule 20 PVC anywhere. Ended up going to Amazon www.amazon.com/gp/product/B001MDCZT8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 where the tubing was 19.99 for an 8 foot section. I bought the Ells from Home Depot, with shipping, cots 14.98 www.homedepot.com/p/NuTone-Central-Vacuum-System-90-Degree-Sweep-Ell-Long-CF377/202195581 The Charlotte Pipe and the straight connector I also bought at Amazon , 10.40 and 5.52 respectively. Charlotte Pipe ABS 03200 0200 DWV Foam Core SCH 40 Pipe, 2', ABS, 2", Black www.amazon.com/gp/product/B002KIC3GE/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 and www.amazon.com/gp/product/B00UZI2RGW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Total is less than 71 bucks. Still a deal! Thanks
@Mikeattempts
@Mikeattempts 5 жыл бұрын
I'm really sorry for the late response, I didn't find this comment until just now. Did you call around to your local electrical supply stores? That's where I got my tubing and fittings. I'm glad you were still able to find what you needed. Thanks for watching!
@pengchen2365
@pengchen2365 2 жыл бұрын
local central vacuum store has the 2 inch- 8 ft tubing for about $3
@Mikeattempts
@Mikeattempts 2 жыл бұрын
@@pengchen2365 I thought I was getting it cheap for $6 per section, that's great! Thanks for the comment.
@Matlockization
@Matlockization Жыл бұрын
I'm wondering why you didn't stay on the roof to wonder the suction tub along all the gutters of the roof. What about leaf mesh installed in the gutter ?
@rongotzon9947
@rongotzon9947 3 жыл бұрын
Im a inventor of many products. To the inventor of the PVC shop vac cleaning idea. YOU ROCK. I WISH I WOULD HAVE THOUGHT OF IT. I FINISHED IT USING YOUR IDEA. I JUST SAVED $175.00 THAT THEY WANTED TO CLEAN MY COLONIAL GUTTERS. GREAT IDEA AND IT WORKS
@Mikeattempts
@Mikeattempts 3 жыл бұрын
That's awesome! Were you able to find the central vacuum tubing?
@teresaevans4840
@teresaevans4840 Жыл бұрын
Man this is fantastic 👏
@joamon559
@joamon559 Жыл бұрын
WHY ARE YOU YELLING?
@Chollanger148-pv8jp
@Chollanger148-pv8jp 2 ай бұрын
Inventor is a word with a specific meaning. Using a different material doesn't equate to inventing the product
@ianmackenzie686
@ianmackenzie686 3 жыл бұрын
Okay, drilling the holes to prevent the suction from fastening to the bottom of the gutter is *BRILLIANT!* I never would've thought of that, thanks!
@Mikeattempts
@Mikeattempts 3 жыл бұрын
I appreciate the comment, thanks for watching!
@dallasvanve7956
@dallasvanve7956 3 жыл бұрын
There is a cut we used in the oilfield called a mule shoe works better than drilling holes.
@dumpy4289
@dumpy4289 2 ай бұрын
@@dallasvanve7956 the gold is always in the comments - thanks
@Chollanger148-pv8jp
@Chollanger148-pv8jp 2 ай бұрын
Simple things
@Dave--gp1qx
@Dave--gp1qx 2 жыл бұрын
Thank you - I built it and it works great on my second story gutters. I was also able to run a garden hose up the tube so I could place the hose in the gutter and flush it with water. I have a small drone, DJI Mini, that I flew over the gutter and angled its camera down to see anything that needed additional cleaning.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
That's great, thanks for the comment! Before I built the vacuum attachment, my original plan was to make a PVC hose attachment to spray out the gutters. I might still do one specifically for flushing out the downspouts.
@dorisboucher2450
@dorisboucher2450 Жыл бұрын
Put a cheese cloth at the end of the down spout and it will chatch all the shit the vac. missed when you wash it out
@myronlemecha1626
@myronlemecha1626 3 жыл бұрын
Well done Mike. What works better for me then thin wall Sch-20 PVC tubing is 3 inch “round” x 10 ft long aluminum down spout. Pros: it’s much lighter, far more rigid for better control and low cost. Cons: it takes a bit more effort to couple the various sections together. Results: I can easily reach my first, second and third story gutters buy coupling or decoupling 10 ft downspout sections. Bonus: After vacuuming all the gutters, I securely attach my iPhone to an expandable window washing pole, then in video mode inspect all the gutters to make sure they’re all perfectly clean.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Yep, the professional ones are made of aluminum tubes too. Good info, thanks for the comment!
@Olivia-bb6wm
@Olivia-bb6wm 2 жыл бұрын
Guys, how would you connect the aluminum downspouts to the vacuum and to each other, and what would you use for the curve? I only found corrugated round ones.
@tgw230
@tgw230 5 ай бұрын
How do you couple and decouple the aluminum downspout sections?
@rickd3196
@rickd3196 4 жыл бұрын
I made a similar version today and it worked very well. I used shop vac extensions tubes I bought at Lowes, PVC pipe for the curves plus duct tape. I did the gutters on the second story by doing it inside from the 2nd story windows. All and all, I'm very pleased and I'm still in one piece! Thanks for making this video!
@Mikeattempts
@Mikeattempts 4 жыл бұрын
Home Depot actually sells a gutter cleaning kit very similar to the one you made. That was a great idea to reach the 2nd story gutters from the windows. Thanks for watching!
@raz3032
@raz3032 2 жыл бұрын
can u reach all of ur gutters fm ur windows?
@southbreeze6745
@southbreeze6745 5 ай бұрын
Nice
@i486DX66
@i486DX66 2 жыл бұрын
This works great. I built one out of two 8' sections of 2" central vac tubing with a 2' section of ABS. The one minor change that I made is that I left the end that goes into the gutter flat...I did not cut out openings for air to escape. I did this because I am using it with a small shop vac that is only 1.75 HP and I wanted maximum suction. The method of letting the end suck down on the gutter and lifting up works great. I also think the flat end works better when positioning it directly over the downspout opening, it can really suck any debis that may have fallen into the downspout. Overall, great design and saved me $300 / use. I think you could put a third section on, but I would recommend using standard schedule 40 PVC for the bottom section for better rigidity.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
That's actually a really good solution for anyone using a less powerful vacuum, thanks for the comment!
@courierdog1941
@courierdog1941 2 жыл бұрын
When I first saw the contractors using a shop Vac, which they took up onto the roof to clean the Rain Gutters, I began to think, There has to be a way to do this from the ground.. Thanks so much for bringing my initial wish for a better and safer way to clean the Rain Gutters. Excellent and simple approach.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Much appreciated! I did a follow up video last year, if you need more detail. Thanks for watching!
@mikefallen7774
@mikefallen7774 2 жыл бұрын
Yes it's the way to go iam 68 retired builder metal knees I did this very similar to yours it works great I have a 3 story home. The family give me a hard time if I try and use a ladder. Thank you for putting it on the net for others much safer way by far.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Thanks for watching!
@legend6591
@legend6591 3 жыл бұрын
I used the 2' vac extensions, I found many at yard sales so pretty cheap. I bought a 55 gal drum with removable lid. Cut holes in the led and put on vac hose adapters with wood, silicone caulk and screws with nuts. Hose from vac to drum and another 2 hoses connected using vac couplers from the drum to the extensions. I strap everything in a pull around cart. The vac never gets full only the drum so I don't loose suction and the vac is easy to clean out even if I suck up wet stuff. The first time I filled the drum twice with leaves and needles, nothing in the vac but some dust. Some times the tubes plug up or they may come apart but easy to fix and I stay on the ground. Highest point is about 20' up.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Dang, that's a MacGyver gutter cleaning rig, sounds like it works great! :)
@jonathanjudd3168
@jonathanjudd3168 3 жыл бұрын
That sounds like a cyclone filter or something similar? I've see a few built by the guys who have wood working shops to keep sawdust out the shop vac.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
@@jonathanjudd3168 Yep, I think that's essentially what he made.
@DavidM2002
@DavidM2002 Жыл бұрын
I've been using this system for the better part of 10 years now. It's faster, safer ( no ladder except for inspection if you choose ), and does a far better job than the trowel. Whenever I see any of my neighbours using the trowel, I'll stop to tell this about the vacuum method. Surprisingly, even the commercial gutter cleaning guys still use the trowel and bucket method. Go figure. Excellent video Mike.
@Mikeattempts
@Mikeattempts Жыл бұрын
They sell a commercial version that's made of aluminum tubes (I think) but it's a bit pricey. Thanks for the comment! :)
@kylel200
@kylel200 3 жыл бұрын
Dude I just want to say thank you! I own a fairly new seasonal gutter cleaning business in a small town. I've had to turn down quite a few jobs that I wasn't able to walk the roof on. Having a machine like this would definitely help me to be able to accept a lot more jobs and be more efficient in a lot of circumstances. Not to mention I've found myself on a few too many uneven ladders trying to balance as best as I can not to tip because a house was on a slope and I couldn't do it from the roof. This will help me to do jobs like that way faster way safer. I appreciate you a ton for making this video! And also I think its awesome you took the time to type out the description too. You rock man!! New sub 🤙
@Mikeattempts
@Mikeattempts 3 жыл бұрын
That's awesome, I love getting comments like this! If you need more detail, I just make a follow-up video. Thanks for watching and subscribing!
@firstname6208
@firstname6208 2 жыл бұрын
A landscape/ orchard ladder has 3 adjustable legs so you can set it up for almost any terrain. Just built this tool but put threaded couplers between each pipe. This will add many more jobs for our lawn biz in the slow periods.. Costs have gone up significantly from this video.
@JNguyen-g8n
@JNguyen-g8n 12 күн бұрын
What a terrific idea, definitely will make gutter cleaning a much less intimidating task. We're going to try this out now that most of the leaves have fallen for the season!
@Mikeattempts
@Mikeattempts 12 күн бұрын
Cool, let me know how it goes! Also, if you need more details, I did a follow up video.
@bobd2772
@bobd2772 3 жыл бұрын
Mike, thanks for posting the video. I just made one and it works great- no more climbing the ladder at my age. Now I can clean the gutters more frequently from the ground.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
That's great, I really appreciate the comment!
@tigerseye73
@tigerseye73 2 жыл бұрын
I did a very similar project to clean my gutters using nearly all the same materials shown in this video: one exception was the shop vac. Instead, I connected the piping to my backpack leaf blower. I now clean my gutters by blowing the leafs and pine needles away while standing safely on the ground.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
That's cool! I'm sure it wouldn't be quite as strong, but you could connect the hose to the exhaust port on the vacuum and blow 'em out that way too. Thanks for watching!
@lhendrick1
@lhendrick1 5 жыл бұрын
Mike! Thanks for this video and your brilliant design. For $40 I built the attachment to clean the gutter at the back of my two story + house. I needed 24 feet to reach the gutter, so used 2 x 8 foot pipes and one 3 footer. It worked great. All parts were available at Home Depot's in Torrington and Waterbury, CT. I may buy a new shop vac with a little more power as my 20 year old 4 hp Craftsman is getting a bit tired, but still managed to suck up a full bucket of dry leaves. Best, I don't have to go up that TALL ladder and scare myself. Thanks again!
@Mikeattempts
@Mikeattempts 5 жыл бұрын
That's great! I'm glad the video was helpful and I appreciate the positive feedback. Those central vacuum tubes come in 10 foot sections too but those are probably a little harder to find. It's good to know that some Home Depot stores have everything you need in stock.
@robertadaversa2503
@robertadaversa2503 3 жыл бұрын
Laurence, do you want a job clearing my gutters near Waterbury?
@ningcaytube
@ningcaytube 3 жыл бұрын
Mike: thanks for this gutter set-up of yours. I did mine with 2 5ft and 1 8ft Sched20 from Amazon (since could not get any 10ft from Hdepo nor Lowe's); Home depot provided me with the connectors though they had to be requested on-line but picked-up for free. So far I used this for my 2 story house, my neighbor's (since her gutter was overflowing over to my driveway when it rain), and my brother's 1 story house--- that's around $360 ($120 x 3) of savings already. Way to go, Mike!
@Mikeattempts
@Mikeattempts 3 жыл бұрын
That's awesome, I appreciate the comment, thanks for watching!
@jfiedler8369
@jfiedler8369 2 жыл бұрын
I watched your video a few times and now I'm back to say thanks, this helped so much. For around $150 CAD I had all the supplies I needed (including the wet / dry vac). Usually one visit to clean gutters costs $100 since I have a two story home. This thing will pay for itself quickly. For those of you trying it - here were my mistakes. 1) not drilling those notches in the end of the tube. "Certainly it won't get stuck to the bottom of the gutter, is my gutter even flat?" I thought. Yes, it will. Yes it will. 2) Know about how high you need to go and plan accordingly. I started off on my front porch and the nozzle was in my gutter and my pvc piping was almost on the ground. This made it a little bit hard to maneuver. Luckily I can adjust both problems easily. Thanks!
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Thanks for coming back to comment! I really enjoy hearing the success stories from people who made their own gutter vac attachments.
@J-to-the-P
@J-to-the-P Жыл бұрын
J, do you mind me asking what wet/dry vac you went with? I can't find one with a 2" hose, and I'm a little worried that a smaller hose will get clogged.
@whereamirunning
@whereamirunning 5 жыл бұрын
Great creativity Mike. Well done. As I get older I was looking for a way to avoid the ladder. I think you have come up with a great solution.
@Mikeattempts
@Mikeattempts 5 жыл бұрын
Thanks Matt! Yeah, up and down on the ladder is rough, I'd much rather do it all from the ground.
@kurushii1137
@kurushii1137 2 жыл бұрын
You can do the same thing with a leaf blower, just substitute a 45 degree elbow for the second joint - then you can blow the debris out. Connect with whatever fits your blower. I used a rubber plumbing reducer from my blower outlet to the size of the pipe. Works fine.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Yep, you could also attach the vacuum hose to the exhaust port and blow 'em out but the leaf blower would probably be more powerful. Thanks for watching!
@NeilLB7
@NeilLB7 2 жыл бұрын
If you blow them out chances are there will be standing water in the gutters somewhere. You'll be taking a shower in black nasty smelling leaf water before the job is done. Guaranteed. And half of the junk will end up on your roof shingles and siding. Been there, done that. Good idea...maybe it'll work for some...but keep in mind what happened to me trying that.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Yeah, that's the reason I only suck out the gutters, clean and easy. I don't wanna get covered in debris and then also have to clean up all the crap on the ground.
@Fresh-tw7ev
@Fresh-tw7ev Жыл бұрын
Unfortunately this setup won’t work at all with backpack blowers which have too many CFM’s and too much torque. I tried it today and the blower generates way too much power for the tubing and angles...unable to handle
@1959whitesox
@1959whitesox Жыл бұрын
@@NeilLB7yeah but his vacuum only works for small Leafs inhave maple and sycamore they are huge lol no way this would work
@cindyallen3540
@cindyallen3540 3 ай бұрын
Thank you so much. My husband and I made this tool. Your instructions are very easy to follow and it Works great. I'm so happy we can now easily clean the gutters. 😊
@Mikeattempts
@Mikeattempts 3 ай бұрын
That's great, thanks for the comment! :)
@RudyF6
@RudyF6 3 жыл бұрын
I do exactly the same but totally opposite. Rigged the tubing to attach to my backpack leaf blower! Been using it for years!
@Mikeattempts
@Mikeattempts 3 жыл бұрын
That's a cool idea! I guess I could do the same by connecting the hose to the exhaust port on the vacuum but it'd be messy.
@RudyF6
@RudyF6 3 жыл бұрын
@@Mikeattempts I just make it the first step when doing the rest of the leaves. Does get messy if they're wet though...
@ReggieRabbitFilms
@ReggieRabbitFilms 2 ай бұрын
Had my first successful gutter clean of the first level using the detailed suggestions. Good workout. Thanks Mike.
@Mikeattempts
@Mikeattempts 2 ай бұрын
That's great, thanks for the update!
@johnlysic6727
@johnlysic6727 3 жыл бұрын
I made a similar pvc clean out but used 1.5 inch pvc and used a heat gun to bend the end of the 10’ section into a 45 degree hook - then used the heat to pinch the end almost flat - instead of suction, I used the shop vac blower - works decent
@Mikeattempts
@Mikeattempts 3 жыл бұрын
That's a cool idea! I've thought about doing the same but didn't consider that it'd be better to taper the end.
@PhilFeedback
@PhilFeedback 9 ай бұрын
That’s Awesome, I wish I had thought of it 👍
@Mikeattempts
@Mikeattempts 9 ай бұрын
Thanks for watching! :)
@TuanNguyen-qu8se
@TuanNguyen-qu8se 2 жыл бұрын
Wow what a great idea! I love home improvement KZbinrs like yourself.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Thanks for the comment, I appreciate it!
@hv7507
@hv7507 2 жыл бұрын
Hi there. Henry from Australia. Thank you very much for your great idea. I have gone to my local hardware and priced the identical items and it comes to $41. The kit for a 1 storey house is $73. Amazing. Thanks mate.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
That's great, I'm glad you were able to find the parts so easily, let me know how it goes!
@bashirkhan3405
@bashirkhan3405 2 жыл бұрын
What sort of vacuum you are using?
@Lmzip2
@Lmzip2 3 жыл бұрын
Use s few 45 degree fittings to offset the top of the long handle. Then you do not need to be directly underneath it. You don’t need to have the elbows in line (plan view) they can be rotated axially to create the desired shape you want.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
I though of doing that but, even though it's a little rough on the neck to look almost straight up, it's much easier to control the attachment while standing directly underneath. I think your idea would work great on single story gutters since the length and weight would be half. With the tip at 45 degrees, your attachment would need to be slightly longer to have the same reach. Also, holding the attachment at an angle feels heavier than if you're directly beneath it. Thanks for the comment!
@randyscrafts8575
@randyscrafts8575 3 жыл бұрын
Awesome! Now all I need to have you c'mon over to my house and show me how to do the entire gutter system.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Hahaha, good luck with that one! :) Thanks for watching.
@richardb9195
@richardb9195 3 жыл бұрын
I just found your video. I made a very similar setup about 10-years ago using abs, but think the vacuum tubing is likely lighter in weight. The one difference I did was to add a 45 right after the second 90. That way the 5” or 6” piece leading into the gutter is not vertical. I also cut it 45 degrees. This eliminates it being sucked down to the bottom of the gutter itself. Works great. I went so far as to add a union to join the 2-90’s. that way you can adjust the attack angle of the short piece leading into the gutter itself. The union prove to be of limited success but was able to optimize the attack angle and eventually taped it with duct tape so it is now permanent.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Sounds like a great design. I toyed around with the idea of angling the tip but, depending on the gutter section, I would sometimes need the tip pointing in the opposite direction. Thanks for watching!
@alb12345672
@alb12345672 3 жыл бұрын
I bought a bunch of shop vac extension pipes.
@bishopp14
@bishopp14 Жыл бұрын
What angle did you wind up going with when you made it permanent?
@matt7iron
@matt7iron Жыл бұрын
@@alb12345672 I got 4 hoover upright extensions from an old vaccuum repair place, what size pvc tightly fits over the extension
@ClemsonTiger75
@ClemsonTiger75 2 жыл бұрын
I've been doing something similar for several years now. Got tired of climbing the ladder so often. I attach a Worx piece to my leaf blower and even attach a camera to the end of the Worx to video and see if the gutter is clean. I can watch on my iphone as I go along to see when it is clean and move on to the next section. I don't have to keep lifting my attachment over those pieces in the gutters as I just hover over the gutter as I go along. The PVC is a better option than the Worx attachment IMO, so I might adopt that as the Worx tends to bend backwards when I have the blower on high speed. Always looking to find a better way and this video certainly helps, so thanks.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Ah, yeah, it would be nice to avoid those gutter hangers, it's probably faster too. I could connect the vacuum hose to the exhaust port and blow 'em out the same way but I've never tried it because I didn't want all that debris raining down on me. :) Thanks for the comment!
@ApprenticeGM
@ApprenticeGM Жыл бұрын
@Mikeattempts - good idea and video, thanks for sharing. To save your neck, do what I do when painting ceilings with a roller; roll up a towel and put on top of a backpack so you can rest your neck whilst looking up.
@Mikeattempts
@Mikeattempts Жыл бұрын
That's a great idea, thanks for the tip! :)
@toddluns1
@toddluns1 Жыл бұрын
This is great! I own a pressure washing company, but I always send my customers to someone else when they ask for gutter clean outs. I can reach about 4.5 stories high with my machine from the ground so I don’t need ladders, and I prefer to keep it that way. I’m going to steal your idea for the tubing, and I am going to run two shop-vacs paired together in series to increase lift power. That should help with the wet crap. Maybe this next winter I can add this service to my business. This will keep me from having to spend $2k on a SkyVac. I don’t want to waste money in case it ends up being something I hate. Thanks again!!!
@Mikeattempts
@Mikeattempts Жыл бұрын
Just be sure you get central vacuum tubing, it's the only plastic light enough. I made a follow up video in November 2021, in case you need more detail (link in video description).
@toddluns1
@toddluns1 Жыл бұрын
I sure will man thanks a lot! After I finish I’ll try to post again with an update. Hopefully running two vacs in series will actually work.
@Mikeattempts
@Mikeattempts Жыл бұрын
@@toddluns1 One suggestion, since you're making these for your business, you could make a 1-story attachment and a separate one for 2-story (as long as you have the room to transport). That way could just buy a central vacuum PVC coupler to join the sections together with PVC cement for the 2-story attachment and you wouldn't need any of the black ABS pipe. The central vacuum tubing comes in 8 or 10 foot sections. Also, you probably won't need 2 vacuums. I'd try one 6.5HP wet/dry vacuum first before buying a second one. My vacuum is only 5HP and it does a great job. Yes, please let me know how it turns out!
@toddluns1
@toddluns1 Жыл бұрын
@@Mikeattempts I have plenty of room. I have my pressure washers mounted inside enclosed trailers. I also already have two 6.5 vacs. I hooked them together this morning and it made an incredible amount of lifting power. I’m sure one would work ok, but efficiency is the name of the game. The sooner I can finish the sooner I get paid. I have lots of days where I’m cleaning 4-5 properties. I’m going to try to order the tubing soon, and after I test the final assembly I will report back. Thanks again for the tips!!
@Mossman04
@Mossman04 5 жыл бұрын
I’ll be making one after work tonight! I have an extra first person view camera I’ll be attaching to the end so I can see what I’m doing from the ground! Great idea for cheap!
@Mikeattempts
@Mikeattempts 5 жыл бұрын
That camera would be a really nice upgrade! I just go over the same section a couple times and hope for the best. ;)
@tlc12070
@tlc12070 4 ай бұрын
That’s exactly what I was thinking maybe a 360 camera
@mikeclem1870
@mikeclem1870 Ай бұрын
First if all thanks for making the videos. @Mikeattempts. It has been very helpful in using these alternative in cleaning gutters especially in second stories and eliminating the use of extension ladders. I was able to find 10ft long, 2" pvc tubing at a local vaccum store at $7 each and ended up purchasing 3 pieces along with the connection fittings. During assembly and first trial run (while raining and gutters overflowing), i was able to use without permanently connecting the fittings with pvc cement. But temporarily used flex tape (used in ductwork) and held up. Also one modification i did was instead of using two 90 fittings, only used one to the side that goes into the gutter and used a 45 at the 10 ft side. It helped with not having to be directly under the gutters.
@Mikeattempts
@Mikeattempts Ай бұрын
I'm glad to hear the attachment has been working well for you. Thanks for the tips, they'll be helpful for anyone considering making this attachment.
@MamaMia....
@MamaMia.... 5 жыл бұрын
I modified this approach to fit my particular skills using packing tape, a coat hanger, and some pipe I found in the grass .
@Mikeattempts
@Mikeattempts 5 жыл бұрын
Hahaha, that's cool, whatever works! Since most of my gutters are 2 stories high, I don't know what else I could use besides the central vacuum tubing. Anything else would be much heavier and hard to maneuver.
@rongotzon9947
@rongotzon9947 3 жыл бұрын
Hey hey hey. Pay attention They gave me a bid of $250.00 to clean the gutters after they put them up 9 months ago. GREAT INVENTION. Thankyou so much. Ill be doing this idea instead of getting on a ladder
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Just be sure to build it with the central vacuum tubing, that's the key to keeping it light and manageable. If you have trouble finding it, call your local electrical supply store. Thanks for the comment!
@westlimcam7960
@westlimcam7960 6 жыл бұрын
Great video. I have a 1.5" shop vac. What I ended up using are: A) 2X 1.25" Charlotte Pipe; B) 1X 1.25"X1.5" rubber coupler; C) 1X 1.25"X1.25" rubber coupler; D) Flex 'n fix under sink extension tube inlet 1.5" length 8-12"; E) a sink tailpiece 1.5" X 6" length ; F) a large paint wooden stirrer; G) duct tape; H) a couple small screws. All these materials bought from Lowe's. Homedepot does not carry schedule 20 pipes.
@Mikeattempts
@Mikeattempts 6 жыл бұрын
Thanks! Yeah, I had a hard time finding the central vacuum tube too, I ended up calling a local electrical supply store who had 'em in stock for around $6 per section. I'm happy to hear that you came up with a solution to fit your 1.5" shop vac hose, does it work well?
@valdiii2252
@valdiii2252 Жыл бұрын
I'm so glad to have come across your video tutorial. I made my own gutter vacuum based on your template/recommendation and it was so helpful. The best DIY gadget I ever made and a great investment to have . It will pay for itself after two gutter cleans. I don't dread cleaning my gutters now. Many thanks!!!
@Mikeattempts
@Mikeattempts Жыл бұрын
That's great, I'm glad the video was helpful, thanks for the comment!
@brucefiset5736
@brucefiset5736 3 жыл бұрын
Great idea, the process of covering the eves so no leaves get in the trough is a bad idea as I have had to climb the ladder to remove the leaves on the flat face of the eves trough to let the water go into the trough and flow..
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Yep, I considered the gutter guards too but decided against 'em for the same reason. Thanks for watching!
@jonjon3719
@jonjon3719 3 жыл бұрын
@@Mikeattempts gutter guards are a complete rip off
@GameKollector
@GameKollector Жыл бұрын
I did this like 15 years ago using gutter down spouts and elbows... All you need is tin snips and duct tape (or silicone) to fit them together... No saws or power tools needed. It's lighter than PVC and can fit on a leaf blower to just blow the gutter out in seconds. Or if you have gutter guards, just blow the top of them off. I used to walk around our entire house with it in less than 10 minutes and be finished
@Mikeattempts
@Mikeattempts Жыл бұрын
The commercial versions are made from aluminum tubing as well. Thanks for watching! :)
@fishmanroly7450
@fishmanroly7450 2 жыл бұрын
Great idea I was thinking about installing gutter guards but my shingles are old and brittle. I literally gave up trying out the sample piece I ordered because of how brittle the shingles where. But thanks to your video idea I made a similar setup but using my blower thanks again for the 💡 idea.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Thanks for watching!
@geyser3445
@geyser3445 2 жыл бұрын
Couldn't find that sch 20 pipe at any stores locally so just happened to find a couple pieces at a "Habitat for Humanity" store. They also had some 90 degree elbows. I used electrical tape to attach the different pieces so I could remove them if needed. Just cleaned some gutters this morning and it worked fine I used my shop vac and blew out the gutters. Haven't tried vacuuming them out yet. Much better than climbing a ladder.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
That's cool that you found some tubing at your local Habitat store. It's more commonly known as central vacuum tubing, and I got mine at my local electrical supply store. Thanks for the comment!
@rhymereason3449
@rhymereason3449 3 жыл бұрын
Good idea using the Schd 20 pipe... I've got 40ft of it left over from my central vac install that I now know what I'm going to do with it. I think it might be more efficient to just cut out about 1" of the pipe that goes into the gutter half way around instead of having 4 cut outs like you made - you should have all the suction happening in the direction you are traveling. It might limit you to traveling in one direction only unless you can twist that piece around... but small price to pay to get more suction where you need it.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
I'm not lacking any suction but you could just make the holes smaller if that's a concern. The holes are only there to break the suction so the tube doesn't stick to the bottom of the gutter. Let me know how it goes!
@rokustittsville2422
@rokustittsville2422 3 жыл бұрын
@@Mikeattempts Quicker way to cut those slots would be to use side cutters and clip triangular openings.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
@@rokustittsville2422 That's true but I wanted to keep the holes rounded so pine needles and leaf stems wouldn't get caught in the notch of the "V". Thanks for watching!
@carlosgraphic
@carlosgraphic 2 жыл бұрын
@@rokustittsville2422 Use stone rotary grinding bits. It will cut the round slot in a faster way or make the holes and then cut the pipe in the middle of the holes.
@dallasvanve7956
@dallasvanve7956 3 жыл бұрын
This was Featured by readers digest 50 year's ago. If you cut your end piece that you insert into gutter at about a 45° to 70° then cut off bottom 2" this is a oilfield "mule shoe" You can get under cross piece. Also use long radius 90's helps. Then you can stand off to side and not strain your neck. I did this many times over the years. LET'S GO BRANDEN!!!
@Mikeattempts
@Mikeattempts 3 жыл бұрын
50 years ago, wow! Was it something you could buy or instructions for how to build one? Thanks for watching!
@potaylo
@potaylo 5 жыл бұрын
I found the 2" black abs pipe at Grainger locally in a 10 foot section for a reasonable price. Thanks for this video........
@Mikeattempts
@Mikeattempts 5 жыл бұрын
Yeah, I had to order my ABS pipe from homedepot.com and I think it was under $5. Local plumbing supply stores might carry ABS pipe too. I'm glad you were able to find some. Thanks for watching!
@testt4548
@testt4548 9 ай бұрын
I understand there is difference between schedule 20 'tubing' vs ABS pipe in terms of outer diameter, how did you connect the Shop vac to 2" ABS? thanks
@cjhtas
@cjhtas 2 жыл бұрын
Good idea, thanks, - I'll make one too. But I have the problem of wet soggy leaves, moss and slime like some others in this thread which I solved some years ago by making an extension for my Karcher high pressure water cleaner using one of those garden shower things with a curved end and cutting off the end of a karcher nozzle. Needs some strong hose clamps to join them because the pressure is fierce. That works very well- at least for one storey - although it pays to wear a raincoat!
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Hahaha, yeah, I bet it's just like getting rained on. Sound like a good solution though. With a strong enough wet/dry vacuum, I wouldn't be surprised if it would just suck all of that stuff up.
@jfmine
@jfmine 3 жыл бұрын
I made a similar rig out of aluminum downspout. Had to make a rectangular to round transition piece out of flashing for the attachment to the shop vac.. Works great and light weight.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Nice! Most of the professional ones I've seen are made out of aluminum tubes but they're pricey. Downspouts sound much cheaper if you want to go the aluminum route.
@danieledwards6016
@danieledwards6016 Жыл бұрын
Thanks for this. Could you please do a video on how you keep your work bench so clean?
@Mikeattempts
@Mikeattempts Жыл бұрын
Hahaha, thanks for watching! ;)
@molepage007
@molepage007 3 жыл бұрын
I'm not handy but this was easy and fast to build, and most of all it works great. Thank you so much for sharing your solution!
@Mikeattempts
@Mikeattempts 3 жыл бұрын
That's awesome, I really appreciate the comment!
@marcelleclair4452
@marcelleclair4452 Жыл бұрын
I put gutter covers on. I have a long telescopic rod with a brush at the end and can sweep the gutter covers from the ground if required especially in inside corners where debris gets caught.
@Mikeattempts
@Mikeattempts Жыл бұрын
That's a great idea! The main reason I've avoided gutter guards is because I knew I'd need to clean the guards anyway. :)
@northcountry3091
@northcountry3091 4 жыл бұрын
Wow, this is fantastic - very simple and creative! Thanks for making the video and providing links for the materials.
@Mikeattempts
@Mikeattempts 4 жыл бұрын
I appreciate it, thanks for watching!
@TeezerDriz
@TeezerDriz Жыл бұрын
❤superb job. I love it. So many people get seriously injured from falls. I have a suggestion for you to consider... if you attached a water hose and water jet tip with a squeeze trigger valve, you could give the gutter a strong wash after sucking out the debris.
@Mikeattempts
@Mikeattempts Жыл бұрын
Thanks! I did consider making a separate garden hose attachment for cleaning out the downspouts, but I haven't done it yet. I made a follow up video with more details, if you're interested in building this attachment.
@TeezerDriz
@TeezerDriz Жыл бұрын
@@Mikeattempts i just watched your update video. Great job. I shared it with a friend who hates using a ladder. He was delighted to see what you made.
@Mikeattempts
@Mikeattempts Жыл бұрын
@@TeezerDriz That's great, I really appreciate you sharing the video! :)
@josephcampese5347
@josephcampese5347 4 жыл бұрын
outstanding! great tutorial. I'm embarrassed to admit that I'm preoccupied with how a bungee cord got into the gutter.
@Mikeattempts
@Mikeattempts 4 жыл бұрын
Hahaha, that bungee cord slid down the roof months prior while I was working on the chimney cap. I was happy to retrieve it with the vac attachment. Thanks for watching!
@TimStriff
@TimStriff Жыл бұрын
Nice job !! Drill holes first then cut off pipe for the standoffs so that vacuum wont stick on gutter .
@Mikeattempts
@Mikeattempts Жыл бұрын
Thanks for watching! :)
@kennmonroe6061
@kennmonroe6061 4 жыл бұрын
I did the same thing but used a 45 degree for the piece going into the gutter. Seems to be a better working angle for me.
@Mikeattempts
@Mikeattempts 4 жыл бұрын
Ah, that way you don't hafta stand directly beneath the gutter, nice!
@scotsmanofnewengland7713
@scotsmanofnewengland7713 3 жыл бұрын
Put in gutter guards and never have to worry about cleaning gutters again. I live here in New England and have oak and maple trees around my two story house and had installed black metal gutter guards from Lowes and have no problems since.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
I looked in to gutter guards prior to building the vacuum attachment but, from my research, they all have their problems and they're not cheap. Plus, I would still have to get up there to clean off the guards because of all the long-leaf pine needles. I'll hafta check out the ones from Lowes. Thanks for watching!
@jonathanhopkins382
@jonathanhopkins382 3 жыл бұрын
Great project Mike! Can’t wait to build one of these. I also like to reduce my time on my 2 story roof.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Thanks, just be sure to read the video description for more details and let me know how it turns out!
@sleepertesla6613
@sleepertesla6613 3 жыл бұрын
Great job my friend, you saved me from repelling down the roof ..
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Thanks for watching! :)
@jordanbrooker1398
@jordanbrooker1398 5 жыл бұрын
I have a section of the house where it is about 3 stories and need to clean the gutters badly, do you feel that another section to get a 3rd story would be doable? Great idea and something I was thinking of doing however your instructions make it very easy, thanks for posting.
@Mikeattempts
@Mikeattempts 5 жыл бұрын
Yeah, it would probably be doable. The reach on mine is probably around 20 feet when holding the end of the vacuum hose at about chest-height. If you were able to measure the distance and then make a 3rd section just long enough to meet your requirements, then you would minimize the amount of additional weight. Thanks for watching!
@ningcaytube
@ningcaytube 3 жыл бұрын
@@Mikeattempts options: if u have a pickup, you can do the work from the cargo side of your truck- that will add a good 3-4 ft of vertical leap and minimize the weight of your total PVC/ABS towards the suction end
@Mikeattempts
@Mikeattempts 3 жыл бұрын
@@ningcaytube True but that's the great thing about using the central vacuum tubing, it's MUCH lighter than standard schedule 40 PVC.
@philipsullano9023
@philipsullano9023 3 жыл бұрын
I made this thing back in 1998 while leaving in Nashville. I cannot believe people have to watch your video to make one of their own.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Sometimes you don't realize how simple an idea is until after you've seen it for yourself. Thanks for watching!
@erikw6699
@erikw6699 6 жыл бұрын
I hadn’t thought of using schedule 20 pipe. Great idea! As for the stiff neck, did you experiment at all with mounting the elbow at a bit of an angle so you aren’t working directly overhead? Also, did you do anything special to attach the extension to the wetvac hose?
@Mikeattempts
@Mikeattempts 6 жыл бұрын
Thanks for the comment! I thought about swapping one of the 90 degree elbows for a 45 degree elbow but I haven't tried it yet. I didn't need to do anything special to attach it to the hose. The PVC pipe slides into the vacuum hose extension, gravity and suction keep it together.
@erikw6699
@erikw6699 6 жыл бұрын
Mike attempts that would probably work even better than my idea, but even with your current set up if you rotated half of the curved part out of plane (I mean that if the whole thing was lying on the floor just bend the end straight and first curved part) by 30-45 degrees so the suction end was vertical in the gutter but the 8 foot piece was at an angle that would move you out from directly under the end. Might be harder to control though. Anyway, great video. Thanks!
@Mikeattempts
@Mikeattempts 6 жыл бұрын
Ah, I see what you mean, so you'd still be directly under the gutter but not directly under the suction end. That's why I used silicone caulk for most of the joints, if I wanted to try either one of our solutions, they'll come apart without too much effort. Thanks again for the comments!
@coreyhiller4809
@coreyhiller4809 3 жыл бұрын
YOu could also get a few different pieces so you could do different angels.
@michaelcerkez3895
@michaelcerkez3895 6 ай бұрын
Nice Mike I'll give it a try. At 65 I spend as little time on the ladder as possible.
@Mikeattempts
@Mikeattempts 6 ай бұрын
I don't blame you one bit! :) I did a follow up video in case you need more details.
@michaelcerkez3895
@michaelcerkez3895 6 ай бұрын
@@Mikeattempts I saw the newer video. I have both of them saved and will have the device fabricated before the end of the summer. I'll send you my critique. Thanks
@Mikeattempts
@Mikeattempts 6 ай бұрын
@@michaelcerkez3895 Yeah, let me know how it turns out! :)
@johneveritt1923
@johneveritt1923 5 жыл бұрын
You didn't have leaves in your vacuum when you were done. Have you used it to clean out a bunch of leaves in the fall? Any issues with clogging because of the leaves? Also, how did a bungee cord get all the way up there? :) Thank you for the video.
@Mikeattempts
@Mikeattempts 5 жыл бұрын
Hahaha, you're the first one to notice the bungee cord! I dropped that when I was working on a chimney leak and it slid down the roof into the gutter. :) We mostly have long leaf pines so pine needles are usually what ends up in our gutters. There were also willow oak leaves in the gutter but they are very skinny. We don't have any really tall oak or maple trees so those don't end up in the gutter. The pine needles and willow oak leave will sometimes form large chunks but I haven't had any issues with clogging yet. I'm sure clogging might be a problem with a weaker vacuum. Thanks for watching!
@johnh-hd2pe
@johnh-hd2pe Жыл бұрын
You should sell a ready cut pvc pipe kit with assembly instructions, ...I'd buy one, ...your idea is a 'Life Saver'***Thank you for the video👍
@Mikeattempts
@Mikeattempts Жыл бұрын
I appreciate the kind words! I'm not trying to start a business, I'm just happy to share the idea. :)
@user-up9bg1ym7b
@user-up9bg1ym7b 5 жыл бұрын
Hi Mike, Thanks for the great video and sharing. I was going to make similar for my gutters: some are 28' high, some 10ft and some 18ft. Your video definitely provides good ideas for my project. Did you glue just the elbow area of the pipe with cement, and the rest using silicon? Do you think the two 8-ft sections, with the vac hose of 10ft or so, would be long enough to cover my gutters? I am not very clear why you used that 24" abs pipe in the middle of the PVC pipes. Is it for easy changing the length? Please elaborate. Thanks again.
@Mikeattempts
@Mikeattempts 5 жыл бұрын
You can get 10 foot sections of the central vacuum tubing, I think that would make it just long enough to reach your 28 foot gutter. I found mine at a local electrical supply store so just call around. Yes, I only used PVC cement on the joint where the first elbow connects to the long section of tubing, the rest is silicon. The black ABS pipe is a coupler to connect the two sections of white central vacuum tubing. It's only glued to the bottom section, the top section just slides down in the ABS coupler, it fits really well. Then I can use only the top section for the single story gutters around my front porch. It makes it nice for storage too.
@user-up9bg1ym7b
@user-up9bg1ym7b 5 жыл бұрын
@@Mikeattempts Thanks for the quick reply. Now, I have a better idea of what you are trying to accomplish. I am using PVC pipes from my collection all these years, so I don't need to buy anything. I have a 3D printer, I can print pipe couplers to fit. There are few customizable templates at thingsverse.com that can be used if anyone is interested. Here's the link to some of them: www.thingiverse.com/search?sort=relevant&q=pipe+adapter&type=things&customizable=1&dwh=355d9e0dfc18604 Again, thanks for your suggestion and have a nice day.
@Mikeattempts
@Mikeattempts 5 жыл бұрын
Standard schedule 40 PVC pipe would be way too heavy. The central vacuum tubing (schedule 20) has thinner walls so it weighs a lot less.
@user-up9bg1ym7b
@user-up9bg1ym7b 5 жыл бұрын
@@Mikeattempts Sorry, I did not make myself clear. I am using Schedule 20 PVC pipes from central vac system. I will be printing out with PLA filament for the adapters, but couplers are relatively small compared to pipes. Thanks.
@Mikeattempts
@Mikeattempts 5 жыл бұрын
Ah, that's good, I can't imagine trying to maneuver a 20 foot long piece of schedule 40 PVC. :) Let me know how it turns out.
@jasonmunoz6617
@jasonmunoz6617 2 жыл бұрын
Genius. Way more satisfying making your own tool vs. buying the cheap mass produced crap that large corporations sell you.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Yep, thanks for watching!
@j.traviscox5536
@j.traviscox5536 6 жыл бұрын
Well done, Mike! I'm planning to build my own. By the way - what camera do you have mounted for your video?
@Mikeattempts
@Mikeattempts 6 жыл бұрын
Thanks for the positive feedback! I use an old Samsung Galaxy S5 smartphone to record my videos. For the "action" shots, I mounted the phone on the gutter cleaning attachment using electrical tape. :) For the other shots it's just a $4 cell phone mount on a tripod.
@jn2400
@jn2400 9 ай бұрын
This is perfect. Got mine all prepped before glue tommotow. Think ill cement the whole top area as the last thing i want is a piece to fall off ill never get back...all i want to add is some type of support at the end to hold a gopro mini.
@Mikeattempts
@Mikeattempts 9 ай бұрын
Mine is still holding together after all these years but, if I had to do it again, I would probably use PVC cement on the whole top area as well.
@jn2400
@jn2400 9 ай бұрын
@@Mikeattempts yeah, the gutters I have to do are super high, and if they fall off they are going to stay there forever lol
@Mikeattempts
@Mikeattempts 9 ай бұрын
@@jn2400 Hahaha, yeah, that would suck! :)
@SteveK139
@SteveK139 3 жыл бұрын
Awesome video. I was watching these to see what I needed to attach to my blower....now going this way!
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Thanks! If you need more detail, check out the update video I did recently.
@johndebruin5747
@johndebruin5747 2 жыл бұрын
Thanks for the video. I just ordered all of the Sch 20. We have a historic house with cedar shakes, rolled-edge eave, and half-round copper gutters that hang (dangle) below the bottom of the curved edge. So propping a ladder against any of that is potentially damaging to that type of roof even with a padded stand-off attached to the ladder. Optimistically hoping this method will work great!
@Mikeattempts
@Mikeattempts 2 жыл бұрын
It works well for me, let me know how yours turns out. Thanks for watching!
@yongsinkang5112
@yongsinkang5112 Жыл бұрын
where did you buy the tube sch 20??? very difficult to fine them
@TheRonKlimo
@TheRonKlimo 6 ай бұрын
I have been contemplating making something like this for my vac or using my compressor to blow the crap out (messy) or my pressure washer with a homemade extension (also messy). I noticed you had very little in the vac canister when you were done, so your gutters were nowhere near as full as mine get multiple times a year. I currently go up on the roof and use my back pack leaf blower, which makes a mess but it works. How does this work for gutters with a lot more crap in the gutters or if the debris is wet? Thanks for posting.
@Mikeattempts
@Mikeattempts 6 ай бұрын
Yeah, in the video I had already cleaned some of the gutters by hand before building the attachment, so the canister didn't have a lot in it. Since building the attachment, I clean my gutters twice per year and the canister is almost completely full every time (mostly long-leaf pine needles and smaller leaves). I usually wait for a few dry days in a row before cleaning them. One time I didn't wait and it still worked perfectly fine. However, the wet shingle grit and sludge stuck to the inside of the vac hose making it heavy. I ended up having to remove the hose from the vacuum and spray it clean with the garden hose. So, even though it works, I try not to do it when the debris is wet.
@TheRonKlimo
@TheRonKlimo 6 ай бұрын
@@Mikeattempts Thank you for the quick reply sir and the information.. I definitely will be trying this one.
@Mikeattempts
@Mikeattempts 6 ай бұрын
@@TheRonKlimo I forgot to mention, I did a follow up video with more details, if needed.
@feathers352
@feathers352 2 жыл бұрын
Yes, it takes longer to get everything out and cords run but still much faster and safer than a ladded.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Yep, I had one of those multi-position ladders and it was very heavy and hard to move when in the extension ladder position. I'm so glad I don't have to do that anymore.
@joelblauvelt5062
@joelblauvelt5062 Жыл бұрын
Nicely done! Wonder if a scoop of sorts at the end in the shape of the inside of the gutter might be helpful in scraping up mud from bottom of gutter & directing debris into the vac….
@Mikeattempts
@Mikeattempts Жыл бұрын
Thanks! That could be a helpful addition but then it would only work in 1 direction.
@phill5697
@phill5697 3 жыл бұрын
All of my gutters are covered . Definitely recommend
@RW-zh7kl
@RW-zh7kl 7 ай бұрын
The gutter vacuum is a great idea, I use that same setup but with a blower, but a vacuum seems easier
@Mikeattempts
@Mikeattempts 7 ай бұрын
Yeah, I can connect the hose to the exhaust port on the vacuum and blow it out too, it's just cleaner to suck it out.
@steveheck7754
@steveheck7754 3 жыл бұрын
Leaf blower attached works great. Use it on my lawn service customers houses. Wear a wide brimmed hat and glasses.
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Hahaha, yeah, you could do the same thing with the vacuum by switching the hose to the exhaust port. I was considering the same thing but it's just too messy. :)
@brucen6579
@brucen6579 3 жыл бұрын
If you were to use a Sch 20 coupling and glue it, you'd find that it doesn't provide much support. At least that's what I found. I wound up temporarily duct-taping an old broom handle to the pipe, but will use the ABS method next season. I also shelled out $99 at Harbor Freight for a 6HP shop vac. All in all, I have less than half in this system than it would have cost to clean my gutters ONCE. I just wish there was a way to stabilize the vac on my relatively low pitched roof, stand back 15' and work from the top. Would save a lot of energy and if done right would only involve one trip up and down the ladder. Thanks, Mike!
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Yeah, it gets harder to control when held at an angle. I like the ABS for storage and the 2 pieces quickly and easily slide together. Thanks for watching!
@feathers352
@feathers352 2 жыл бұрын
I had made one of these years ago. Guess there is nothing knew. Mine is all one piece as I only have a cape cod and it fits perfectly on the lower gutters. I did set the the size down from 3" to 1 1/2 so it would fit down into the gutter easier without banging the shingles. It sure beats get out the ladder and banging my hands up.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Yep, I can clean all my gutters now in less than a half hour, it's great!
@MattChan-ig4hj
@MattChan-ig4hj 2 жыл бұрын
Just finished sucking out 250' of gutters...twice. Because I started with the 2nd story gutters before I got up on a ladder to check the 1st story ones to see how I was doing. I discovered that the 5.75" downward facing tube was too short to reach the bottom of my gutters, and the elbow was hitting the edge of my shingles. So basically there is only a 2.5" gap to slip the tube into. Luckily I found a 10" piece of clear plastic tubing that fit perfectly inside the end of the suction tube. Then it reached the bottom of the gutters. But it still didn't slide very smoothly because it was getting caught on the dried shingle grit lining the bottom of the gutters. Wow, I shoulders and neck are going to be pretty sore tomorrow!
@Mikeattempts
@Mikeattempts 2 жыл бұрын
That's rough but it sounds like you got it figured out so hopefully it'll be much easier next time.
@inhocsigno9151
@inhocsigno9151 2 жыл бұрын
Impressive, I'll build one. I had tried on using aluminum gutter downspout for the light weight, but it split open when trying to reach the 2nd story. The seam is just a simple crimp and does not stand up to torque to flexing.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Let me know how it turns out, thanks for watching!
@daredelois8402
@daredelois8402 5 ай бұрын
Hi, how did you do to film inside the gutter. Thanks . amazing idea btw
@Mikeattempts
@Mikeattempts 5 ай бұрын
I just tape a cell phone up there to get the shot. Some viewers have said they added Go-Pro mounts to theirs so they can see what's in the gutter in real time. I haven't felt the need for that level of technology integration but to each their own! :)
@daredelois8402
@daredelois8402 5 ай бұрын
@@Mikeattempts ha ha well said. thx
@jetstream123
@jetstream123 2 жыл бұрын
Thanks for posting and doing the material list.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
There's a follow up video if you need more info. Thanks for watching!
@benny7298
@benny7298 4 күн бұрын
It seems neither Lowes nor Home Depot have Sch-20 PVC in my area. The local electrical shop don't have it either. Their PVC are all Sch-40. Your video is awesome. I have a gutter section that is 3 stories high, about 30 ft from ground level. Also have pine needle issues from my neighbor's trees. Any idea where else I could find Sch-20? Thanks.
@Mikeattempts
@Mikeattempts 4 күн бұрын
Thanks! I incorrectly referred to it as schedule 20 but it's only called "central vacuum tubing". I did a follow up video with more details, check it out.
@KAVE974
@KAVE974 Жыл бұрын
I used this today and worked pretty well, my only constructive criticism is that when you are using the upper section of piping, you don't have a lot of control from it spinning around.... I kept fighting it. My suggestion would be to notch the upper section ring and abs pipe such that they engage with each other. This would allow you to still maintain two separate pieces without adding rigid connections between the upper and lower sections, but "lock" them into place with gravity.
@Mikeattempts
@Mikeattempts Жыл бұрын
That's a good idea. Over the years, I've learned to lean the outer tube against the outside of the gutter and the bounce the head up and down a bit as I move in one direction. If I need to go in the other direction, I rotate so the other side of the outer tube is against the gutter (if that makes sense).
@deepspeed3612
@deepspeed3612 Жыл бұрын
Nice job mike! Im doing a invention for a science fair and this helped me get a idea. Thanks so much
@Mikeattempts
@Mikeattempts Жыл бұрын
Ah, that's cool, I'm glad the video was helpful! :)
@rohankhemraj
@rohankhemraj Жыл бұрын
I followed your instructions...It seemed to work nicely...thanks!
@Mikeattempts
@Mikeattempts Жыл бұрын
That's great, I appreciate the comment! :)
@rohankhemraj
@rohankhemraj Жыл бұрын
@@Mikeattempts I followed your plans exactly except I used 10' vacuum tubes and duct tape to attach the abs pipe in place.
@Mikeattempts
@Mikeattempts Жыл бұрын
@@rohankhemraj Ah, nice, that'll give you some extra reach!
@homemadetools
@homemadetools 2 жыл бұрын
Nice work. We shared this video on our homemade tools forum this week 😎
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Thanks, I really appreciate the share! :)
@joejoe-lb6bw
@joejoe-lb6bw 3 жыл бұрын
Great DIY. In experience the curve should not be in line with the long tube. Example, my 5 HP motor shop vac couldn’t pull the giant oak leaves. Maybe they where too wet. So I attached to blower end. The angle of the pipes just blew everything toward my face. Now to add the extension to reach higher. Thanks for the video
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Yeah, I mostly get pine needles and smaller leaves. I would imagine larger leaves, like oak, could result in some clogs but I would think damp leaves would get sucked up easier than stiff dried ones. Thanks for the comment!
@theresahanson5022
@theresahanson5022 Жыл бұрын
Thanks for posting. I think it’s a great idea, but I have neck issues to begin with. But still doable
@Mikeattempts
@Mikeattempts Жыл бұрын
I made a follow-up video, a little over a year ago, in case you need more detail. Thanks for watching!
@maitlandbowen5969
@maitlandbowen5969 2 жыл бұрын
What a wonderful solution. Not sure that it could meet all my needs as some parts of my gutters are inaccessible from ground-standing. And then, I’d have to purchase a ‘wet and dry’ vac, of course. Also, very unconfident of being able to construct the apparatus. But, May give it a go, as it is the best idea I’ve ever seen on the enormous problem of gutters. A question - how is the connection (attachment) between the apparatus and the vac accomplished (perhaps you covered that, I may have missed it)? (Whenever I interact with my gutters, it always strikes me about the astoundingly inadequate design of gutters.) Thanks for your video.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
I did a follow up video 3+ years later that should answer any additional questions you might have. Thanks for watching!
@maitlandbowen5969
@maitlandbowen5969 2 жыл бұрын
@@Mikeattempts Many thanks for your reply, Mike. I’ll look for it 😊
@asdpt871
@asdpt871 6 ай бұрын
What’s the horsepower of you shop vac? Wondering if mine will have enough oomph with this long of a pipe extension.
@Mikeattempts
@Mikeattempts 6 ай бұрын
Mine is a "5 HP" but other viewers have commented that it works fine on less. I did a follow up video with more details, if needed.
@demitch256
@demitch256 5 жыл бұрын
Thanks...I'm glad you clarified that. I'll call around and see what I can find.
@Mikeattempts
@Mikeattempts 5 жыл бұрын
Any luck finding the central vacuum tubing?
@Dave--gp1qx
@Dave--gp1qx Жыл бұрын
I use my drone to see where cleaning is needed and to guide the suction tube. Also I like to run a hose up the tube to run water in the gutters and downspouts - it helps to run a section of hose down the bend, then screw the fitting in to the hose that will be going up and pull it up through the bend then unhook them and it’s ready.
@Mikeattempts
@Mikeattempts Жыл бұрын
Ah, that's a cool way to use it, thanks for watching!
@NeilLB7
@NeilLB7 2 жыл бұрын
I'm going to build this but have a ball valve on the ground end so I can shut off vacuum for a moment to drop a clog at the inlet. I have 6" gutters because I have large sycamore trees with leaves that are massive. I will be basically picking them up then dropping them. I doubt they will make it into a 2" pipe. At least it'll still be faster than ladder work and much safer. Basically I'll vac for a moment, clog the tip with leaves, come out away from the gutter for a second and shut off vacuum to let go of the clump.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
That's a really good idea, let me know how it goes!
@madisonave37
@madisonave37 2 жыл бұрын
This worked perfect for me. I have one gutter almost 3 floors up and it even reached that one, though it was a bit difficult to handle at that height. I’d like to figure out a way to temporarily lock each piece into position.
@Mikeattempts
@Mikeattempts 2 жыл бұрын
You could make an attachment just for the 3-story section and use PVC glue and PVC couplers instead of the black ABS pipe. This will make it a little lighter and a bit more stable. Thanks for the comment!
@gypsysundrop
@gypsysundrop 2 жыл бұрын
I had to subscribe as soon as it started. Awesome. Thank you!!
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Thanks for the sub! I did a follow up video 3 years later that has more detail, if needed. Thanks for watching!
@fixitfaster
@fixitfaster 3 жыл бұрын
Fantastic idea.....I'm going to put one together right away.....Thanks for sharing!
@Mikeattempts
@Mikeattempts 3 жыл бұрын
Read the video description for more details and let me know how it turns out!
@barryrobertson9066
@barryrobertson9066 2 жыл бұрын
What an awesome system, it’s genius!!
@Mikeattempts
@Mikeattempts 2 жыл бұрын
Thanks! I did a follow up video if you need some more detail.
@BigOsTaco
@BigOsTaco Жыл бұрын
I would have loved to see how you connected to the vacuum but great idea👍
@Mikeattempts
@Mikeattempts Жыл бұрын
The attachment just slides down inside the short extension that comes with wet/dry vac and then bottoms out on the stops I glued on. I did a follow up video, if you need more details.
@BigOsTaco
@BigOsTaco Жыл бұрын
@@Mikeattemptssaw your update video too. Good stuff. Might end up doing something similar (feeling a bit lazy though lol)
UPDATE: Gutter Vac (3+ Years Later)
5:33
Mike attempts
Рет қаралды 131 М.
Can You Charge A Phone with Marbles?
18:06
Engineezy
Рет қаралды 1,3 МЛН
[BEFORE vs AFTER] Incredibox Sprunki - Freaky Song
00:15
Horror Skunx 2
Рет қаралды 20 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 45 МЛН
Shop Vac Gutter Cleaning Attachment DIY
14:25
Flannel Guy DIY
Рет қаралды 131 М.
STRANGE CASE: RUDE Neighbour Went Too Far? I Discovered Evidence Whilst Cleaning A Roof!
13:11
Partridge Exterior Cleaning
Рет қаралды 1,2 МЛН
5 Best Gutter Cleaners | Best Gutter Cleaning Tools
5:39
Tools Zone
Рет қаралды 245 М.
Gutter Blower, Gutter Vacuum, Evolution
18:12
Powerful Improvements
Рет қаралды 54 М.
Gutter Cleaning - 2 story home in 12 minutes- using a harness from the roof
12:33
The Best Gutter Cleaning Tool On The Market
4:17
MIKEV
Рет қаралды 83 М.
NO LADDER 😨 DIY Safe Video Leaf Gutter Cleaner
4:05
Kite Army
Рет қаралды 3,4 М.
Weed-Free Driveways and Sidewalks: The Ultimate Solution!
8:35
Everyday Home Repairs
Рет қаралды 4,6 МЛН