ADA Concrete Wheelchair Ramp

#EverythingAboutConcrete #TheConcreteUnderGround
In this video I'm building a concrete ramp that's ADA compliant and will be used for wheelchairs and handicapped people that need to get in and out of this church.
This ADA ramp is 28' long and has 28" of slope from top to bottom. When you pour a concrete ramp, you want a stiffer concrete mix so it doesn't sag as your pouring and leveling it. We used a 4000 psi mix for this ramp and poured it at a 4" slump.
If you're looking to learn how to form, pour, and finish concrete like we do, check out The Concrete Underground below.
The Concrete Underground Training Academy:
www.theconcret...
MY STAMPED CONCRETE COURSE:
mike-day.mykaj...
MY CONCRETE SLAB COURSE:
mike-day.mykaj...
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykaj...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykaj...
VISIT MY WEBSITE:
www.everything...
USE THE SAME TOOLS I DO:
FLOOR FINISHING POWER TROWELS:
amzn.to/3abyIAf
ScreeDemon Vibratory Screed:
shrsl.com/2ej6o
12' Screed Board for ScreeDemon:
shrsl.com/2ej6u
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.c...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
www.instagram....
Follow my Facebook Page:
/ everythingaboutconcrete

[@jjbailey01]

The level of thought, care and respect you give towards the specific use case of your product is top notch. You also have a knack for clearly and concisely explaining your process. Great work!

[@houndsmanone4563]

Nicely done. I need to have several drive up ramps/aprons from the graveled road into my newly built garage. I have four areas that require ramps entering the building so that will finalize my exterior work. Thanks for the video showing how you poured and finished the concrete. I'm anxious to have my ramps done. So in order to control the slipping of poured concrete, just make the mix drier so gravity doesn't make it shift. Enjoyed a full-watch. I learn something new every time I watch your vids. 👍🏽🤠 02/23/24

[@MikeDayConcrete]

Thank you

[@3125Dissent]

Mike, lots of respect for your quality of work and your concern for how your finished product will benefit future users!

[@tr4nsmogrify]

🎉

[@Kazner0h]

The attention to detail on the finish is really cool. I didn't know about using a broom to create that texture before this video.

[@morrossey]

Nothing better than watching people who’ve perfected their craft at work!

[@sculptman01]

This video answers so many questions of concrete work, you really present it as an art and so thoughtfully done, thank you!

[@affordabledesertliving3487]

Lovely work Mike. A neighbor asked if I could build him a wheel chair ramp and since I have only done a bit of concrete work I said no. LOL. But if I had this kind of skill I would have been good. Thanks for sharing.

[@philleach6271]

Great taking out the slumps with the wooden straight edge on the slope. Plenty wouldn’t bother!!! 👍💪

[@davidhinson5010]

Awesome job! You guys are always about details and creating a great finished product. Keep it up from NC.

[@MikeDayConcrete]

Thanks! Will do!

[@Frxstynah]

Beautiful finished product. Thanks for sharing the completed job. Can't wait to sign up for your training channel

[@MikeDayConcrete]

Awesome! Thank you!

[@ellyess7203]

This is so lovely to watch. I don't suppose you could all come to England and make one for me could you? Just joking, it would be wonderful but I'm broke. Thanks for the film and teaching.

[@phillipscavitti3465]

Nice job with the wheelchair ramp

[@MikeDayConcrete]

Thanks Phillip!

[@Indudesign]

FANTASTIC JOB!!! and great additional links 💯

[@patty-ow9ul]

Cracking job mate very clean finish 😊

[@jackfaught6861]

I really enjoy your videos. Very informative, and you have a great way of explaining it to a beginner

[@masonman88]

always great to the complete finish ! thanks for sharing...

[@AllAccessConstruction]

Mike #KeepPounding congrats on your classes... 👌🏿👌🏿👌🏿👍🏾👍🏾👍🏾

[@MikeDayConcrete]

Thank you:)

[@kevinwbeasley]

You did a nice job on the ramp. You may not be aware of how dangerous blowing concrete dust (silica) is without the use of a mask to protect your lungs. Silicosis is an interstitial lung disease caused by breathing in tiny bits of silica, a common mineral found in many types of rock and soil. Over time, exposure to silica particles causes permanent lung scarring, called pulmonary fibrosis.

[@xj9ox]

I think you are right about screeding uphill. I'm no expert, but I found that screeding downhill tends to drag the concrete from behind the screed leaving it low. The wetter the mix, the worse the effect because gravity helps to move the concrete down hill. I do have a fair bit of experience pushing wheelchairs around and dealing with four wheel walking frames though and the cut joints in the concrete are a good idea as some people can get hung up on the smallest bumps, especially with the wheeled walking frames. I like the slope too as it helps with decent control more than anything. I have seen a walking frame get away from someone that was going down a steeper ramp and they were not strong enough to work the hand brakes. That sort of thing can be pretty nasty. Good job and thanks for taking the time to think about the people who might make use of your concrete artwork.

[@MattNis1]

Thank you for using sealer.

[@danno55328]

Another great job, I like the attention to detail around keeping the broom clean.

[@andrewchitty5453]

wow turned out great, good job Mike and team.

[@MikeDayConcrete]

Thank you!

[@jeffreyb8152]

Beautiful work!

[@WesDouglas-b2g]

Very nice job brother

[@joeturbo64]

Excellent excellent video brother keep up the great work

[@jacobgonzales8935]

nice work mike !!!

[@Jack.333]

Looks Terrific. Good Work Guys. Best Ive Seen. Great Attention To Detail.

[@MikeDayConcrete]

Thank you very much!

[@andyb3735]

Did you vibrate the concrete?

[@skliros9235]

Good job Mike!

[@MikeDayConcrete]

Thanks

[@jevigillsikh]

Hello Mike, great work. I learned a lot. I am working on building a concrete ramp and having hard time finding handrails like in this video. Would you mind sharing the manufacture's info? Thank you.

[@qwerttyyw]

Mike, you are doing a great job.

[@billcook7021]

Class outfit 👍Nice work!

[@MikeDayConcrete]

Thanks 😁

[@bruceyoder5353]

Looks good nice job👍

[@MikeDayConcrete]

Thanks 👍

[@LighthouseUnderground]

Can you put heat strips or something so ice and snow will stay off

[@treetop5752]

What broom do you like? Brand?

[@ltcajh]

Good video. From a pulmonary perspective- can't be good breathing that dust!

[@arthurlong281]

What was that you used to cut your jionts

[@angetodac]

I have a hight of 23 inches for a lenght of 21.5 feet....will this get approved to be done without a landing?

[@tomroe2861]

Great job

[@MikeDayConcrete]

Thanks Tom!

[@markvigneaux3246]

I have made ramps in my cellar but the kept sliding down. I had to keep pushing it up. Looks like thinking consistency is better. Why did you cut those lines in it after? How deep do you go?

[@5graney5]

Such good videos Great stuff

[@1sttigertiger426]

Was caulk applied to the saw-cut lines? Water/snow can seep below and cause the concrete to heave, especially with the impermeable foam below.

[@carolinejulia6690]

hey! i would like to ask. does the ramp need a foundation?

[@jerryw4881]

Great video.

[@WinstonFiore]

layman here, forgive my ignorance: so is the ramp just filled in with compacted gravel then up until four inches from the top?

[@angetodac]

how nuch it cost tobuild a ramp like this?

[@jeremyhuggins8796]

Nice job Mike! I'm curious as to how the handrails are attached.

[@MikeDayConcrete]

They were core drilled and grouted in.

[@jeremyhuggins8796]

@@MikeDayConcrete Thanks!

[@Mike54880]

Hey my name is Mike Day!!!!!

[@Policepursuitvideo]

Americans With Disabilities Act of 1990 (ADA; Pub. L. 101-336) The ADA established accessibility guidelines for buildings and facilities (see Phillips et al., 2020; Foti & Koketsu, 2013, pp. 179-194; U.S. Department of Justice, 2010) Accessible route: The minimum clear width of an accessible route is 36 inches, except at doors. Ramp The maximum slope of a ramp is 1:12. Ramp slopes between 1:16 and 1:20 are preferred. Most ambulatory people and most people who use a wheelchair cannot manage a slope of 1:12 for 30 feet. The maximum rise for any run is 30 inches. The minimum clear width of a ramp is 36 inches. A ramp run that has a rise of more than 6 inches or a horizontal projection of more than 72 inches should have handrails on both sides. Stairs: All steps should have uniform riser heights and uniform tread widths of no less than 11 inches. Handrails Clear space of 1-1½ inches between the handrail and the wall A height of 34-38 inches, or waist height depending on the person’s height, measured to the top of the gripping surface from the ramp surface or stair nosing, is recommended for adults. A maximum height of 28 inches is recommended for children. Doorway The minimum clear opening is 32 inches. (Note: The minimum clearance width for a standard adult-size wheelchair is 26 inches; the minimum clearance width for a walker is 18 inches.) Thresholds at doorways should not exceed ¾ inch in height for exterior sliding doors or ½ inch for other types of doors. Raised thresholds and floor-level changes at accessible doorways should be beveled with a slope no greater than 1:2. Door hardware for accessible door passages should be mounted no higher than 48 inches above the finished floor. Wheelchairs: minimum of 60-inch diameter or a 60-inch by 60-inch T-shaped space for a pivoting 180° turn to avoid the need for repeated tries and bumping into surrounding objects

[@stevepesut5304]

Seal it that quick?

[@oldman4289]

Hi Mike, another great video. Have you done any work with fiber optic concrete? Was really wondering how you felt about its uses, costs, and durability? Are there any other new technologies your excited about?

[@nyba23]

what saw do you use to cut ths joints?

[@MJRConcrete]

Mike how do you do an aggregate finish on concrete? I do this for a living and I don't know

[@pprich1]

Could I get a link for the sealer you used? Thanks!

[@bdhabets3250]

If you bull float the opposite way of the screeding you would help your highs and lows.

[@MikeDayConcrete]

On a slope like this it doesn't work that good, been there and tried that many times.

[@bdhabets3250]

@@MikeDayConcrete use a lighter bull float without a knuckle

[@chiriviscospower]

Silivio and Paulie to Richie, "we need you to build beansie a ramp, make it how do you say wheelchair accessible.."

[@ivanbagual]

Mike should answer their followers

[@lanardbriggs1803]

Concrete ramp on concrete floor ten feet long

[@nomoretaxes2166]

Saw cutting with no eye protection. You never know who's watching.

[@mitchyelvington4776]

Safety glasses?

[@elbuggo]

They use safety socks - don't need glasses then.

[@FernandoRodriguez-ds5ri]

How would you build railings for the ramp. I have the same ramp just need ideas 🪜

[@MikeDayConcrete]

They hire a welder to core drill holes and install a really nice metal railing. He builds it himself, and installs it all by himself.

[@skiprope536]

Dude great stuff you do. Mask up cement dust KILLS.

[@georgeluckett4691]

How much is build like this cost on the handicap ramp with stairs