The Ultimate Supermoto build, Husqvarna FS450 R. Think the 2021 Husqvarna FS450 will beat this? I think not. #supermoto #supermotoracing
Пікірлер: 154
@Actionlutz4 жыл бұрын
a good sticker set would get you at least 2 more hp
@jaychou1199r4 жыл бұрын
Here is a crazy sick Husqvarna FS
@fajarfahrudin62814 жыл бұрын
The swingarm look so sick
@jigglemore4 жыл бұрын
I think you should give the bike to me 😉 Not sure what other upgrades you can make but would love to see workshop videos of the engine swap!
@BraappMalaysia4 жыл бұрын
Great video as always. 😁 greeting from Malaysia
@hehexd694204 жыл бұрын
Next step after engine: Get a new full carbon fiber chassis 😂
@AudioFabric4 жыл бұрын
It would never work. Carbon fibre cannot flex like metal does. Flex characteristics are what give a bike great handling. Also the thickness of carbon fibre that will be required will make it mostly impossible to engineer the right tortional characteristics into the frame. It'll look amazing as a show bike but will handle like a school bus.
@RapidRossi4 жыл бұрын
Hey, your videos on riding techniques are the best on youtube, easy to follow, could you do a video on trail braking please? :)
@LIC1N Жыл бұрын
Twin header custom or market bro?
@julztry97973 жыл бұрын
holy cow...
@CodyBunker3 жыл бұрын
I am looking at buying an fs 450 and making it street legal. Hopefully it works
@cr9169 Жыл бұрын
Add a Carbon fiber frame
@kalle52184 жыл бұрын
Yellow and blue graphics
@bramnuttynck40134 жыл бұрын
Nice bike
@beardedcobra48983 жыл бұрын
Then you will have anything swaped but the frame & plastics? 🤷🏼♀️😂 mabey yu only need to buy a frame then and can build a original fs again from the parts you have lying around 🤔🤷🏼♀️😂
@soorajsaikumar4 жыл бұрын
Heard like super motos are very hard to maintain, like every some hour you have to change oil or do a teack run or less it damages the engine etc etc correct me if im wrong
@Peanutdenver3 жыл бұрын
It depends on the bike...the 701 Husky SM has more "street bike" like maintenance intervals, but the Husky FS 450 is the exact same bike as my FC 450 mx bike. So it will need maintenance after every race/weekend if you're competing at higher levels locally or in the AMA. I could go into greater detail if you need me to with specifics. Btw the Ducati Hypermotard is more like a "street bike" in terms of maintenance...it's a super supermoto if ya feel me. The original SM were basically enduro or mx bikes with different wheels, lights and a license plate slapped on them. Now we have manufactures making ready to race sm...and sm more friendly to the average rider who wants some of the capabilities of an original sm without having to pull the top end, change tires, etc after every weekend race. Hope this helps you.
@soorajsaikumar3 жыл бұрын
@@Peanutdenver hey thanks for the info 👍🏽
@jonschmid53833 жыл бұрын
Steering damper..
@The90pete907 ай бұрын
Double break ?? Noooooooooooo
@Sainte3054 жыл бұрын
I hope you actually show the engine swap, not just an after view of it. :) Great video as always, just wish they were longer.
@nico408204 жыл бұрын
And a dyno test ! How much are those race engine supposed to produce ?
@Sainte3054 жыл бұрын
Nico Yes! I’d love to see the numbers too!
@nico408204 жыл бұрын
@@Sainte305 whith a little weight saving around the bike , it can end up with a very good power to weight ratio !
@Sainte3054 жыл бұрын
Nico Oh yeah, she’ll be a ripper for sure.
@lucasgray39454 жыл бұрын
surely do a build cost at the end
@nyleen4 жыл бұрын
More than the FS450 costs brand new. ;_;
@Karabas-Barasbas52 жыл бұрын
@@nyleen better to invest this money in training and skills instead of heavier parts and bigger brakes.
@chinmayanand19604 жыл бұрын
Custom livery would look sick 🔥
@mhilde77444 жыл бұрын
"What should you do next?"......give it away to one of your subscribers!
@Tungmoto4 жыл бұрын
The swingarm looks unreal. It's amazing how much material you can take off it.
@michaelmckay3 жыл бұрын
It still weighs more than stock
@Tungmoto3 жыл бұрын
@@michaelmckay is it? Do you have the specs of them?
@Hemojang3 жыл бұрын
Hard to believe it’s heavier than stock, it’s mostly gone!
@srrtbb3 жыл бұрын
I found the this swing arm online and on their website it is 4.6 kg. I didn't google how much stock arm weigh. But it can't weigt more than that.
@Tungmoto3 жыл бұрын
@@srrtbb that's cool mate. Can you tell us the name of the swingarm?
@markaurelius31194 жыл бұрын
Oh, that is an expensive piece..
@davidlazzaro4 ай бұрын
Great series, where is the next episode for the FS450R ?
@Bazza.baz2244 жыл бұрын
After you swap the engine, the only thing left to do will be to remove the Husqvarna badging and rename it 'Bitsa'
@fabzrustrider98384 жыл бұрын
I love all this information thank you Mike 👍🏾🇬🇧💯
@federico2974 жыл бұрын
Swap the front rim to a 16inch, the Michelin 16.5 is garbage compared to the 16. And put an MTR linkage, changing the linkage progression is useless without completely changing the internal setup of the shock, and the MTR linkage is the best you can buy for ktms and husqys (they just put Lukas Hollbacker on the 3rd place in the World Championship and they have years of experience in the Supermoto world championship) Oh yes, also put a 5inch rear wheel and use it with a Metzeler k1, only the tyre is 1kg lighter than the Michelin and it provides a ton more grip,only downsize, it's more unforgiving on the exit of the dirt section and on the dusty tarmac
@jacquesevans10234 жыл бұрын
Good info! I was considering trying the metzeler tyres. I recently switched to the 16” Michelin and much prefer it. What’s the metzeler front 16.5” like?
@federico2974 жыл бұрын
@@jacquesevans1023 Metzeler made a new 16.5 for this year, they say it has the same feeling as the 17 but it's easier to use (the 17 is better than the 16 Michelin but you have to push really hard to use it properly, the 16 is far easier to use, even setting up the forks is easier with the 16). I would recommend the 16, here in Italy it's still the most used front rim (excluding who is sponsored by Metzeler, who uses the 17 mainly)
@jacquesevans10234 жыл бұрын
Fede Supermoto #297 I’ll order a set of metzeler front and rear tyres and compare on the same day with a 16” Michelin front. Thank you for the info
@federico2974 жыл бұрын
@@jacquesevans1023 it's kinda hard to compare on the same day, every tire needs the proper setup with the suspension. It can be you're far off with the 16 but it works with the 16.5 or the opposite
@jacquesevans10234 жыл бұрын
Fede Supermoto #297 Yes very true. What pressures do you run the metzelers?
@wieliewonka4 жыл бұрын
Tomasin has vortex ecu where sp quickshifter tip is directly plug and play Ad dual injection from them and mtr carbon ram Air system
@c4pp3rides144 жыл бұрын
Healtech Electronics got a lot of cool electronics like quickshifters, shiftlights etc. check them out they might have something you like. Im running their Quickshifter on my ktm 125 exc supermoto
@stephanesimard16924 жыл бұрын
I think I just learned the correct way to pronounce Ohlin Thanks.
@quandocevocevo55314 жыл бұрын
Parts from Italy, no?? Too expansive? Brembo, termignoni, dell'orto, Marchesini? No? Ahiahiahiahiahi!!!?👌😉
@candymuldowney93464 жыл бұрын
That swing arm is strange looking. Can you go into more detail on it?
@JoeySpanish75 Жыл бұрын
What do you think is the best upgrade if you can only pick one thing (just curious). And maybe you can buy bst carbon wheels for it, never seen that on a Supermoto. and do you really notice a power improvement of that double piped exhaust ? Looks cool, but does it work?
@CriticalRider4 жыл бұрын
Anything done with engine internals? Air filter? Tuning? Cooling system?
@peterngan3393 жыл бұрын
Hi what's the race sag about is goog for supermoto ? Because dirt always is around 95 ~105 .Thx
@davidrespect64713 жыл бұрын
Your Tekmo exhaust has already burn in spots Chinese crapy quality!
@nolfavrell42444 жыл бұрын
at this point just decorate it with diamonds smh...
@adamsudarman96302 жыл бұрын
What name of "fork bottoms" for your mounting your caliper sir? I cant found on google..
@nico408204 жыл бұрын
What clutch will you use ? You can try to shave some weight wherever it's possible (carbon and billet bits ) , handlebar , plastic... A set of lighter screw and bolt would be nice too.
@Astrix_Jaeger3 жыл бұрын
Well, if you got a chance some other time, I think you should race it.
@ngrracingproducts9523 жыл бұрын
Where can i buy the Spider linksystem?
@zardportugal4 жыл бұрын
Wow.
@JLG0987213 жыл бұрын
Do you have any lap times with and without the swingarm only
@patrikkerttu6234 жыл бұрын
If you go full spec on engine I assume you go for GET/Vortex ECU as well. Also look into large air intake with double injectors. Check www.bergos.de/technik/motortechnik/sonstiges/3973/tuning-ansaugrohr-husqvarna/ktm?number=10603018
@preslavnedyalkov54323 жыл бұрын
uhleens? is that how you spell ohlins? interesting...
@getthatm81874 жыл бұрын
Is a Dream bike ! Is awesome 👏 congrats 🍾
@Karabas-Barasbas52 жыл бұрын
Great build , what is the total cost for the build ?
@ezlife94512 жыл бұрын
What sizes did you use for the front and rear tires?
@olis7904 жыл бұрын
Race it!
@marijnkramer68973 жыл бұрын
i think you should give the bike to me :P
@iainhutchinson3452 жыл бұрын
When are you doing Part 3????
@sillyben2133 жыл бұрын
I think you should ride the bike!
@deensedudevonand41153 жыл бұрын
I Suggest : COMPRESSOR .
@jc151racing4 жыл бұрын
You have done so much to the bike. It’s all awesome, but you could have started with an MX bike and been at the same place for way cheaper. Or get a MX bike and put the FS parts on it for a rain/B bike.
@charleshuang92714 жыл бұрын
YESSSSSSSSSSSSSSS FINALLY PART 2
@AudioFabric4 жыл бұрын
Too much money, not enough taste.
@backyardhooper063 жыл бұрын
Stickers add horsepower
@motojc3 жыл бұрын
put it on ebay and have us bid on it
@MCTC883 жыл бұрын
Work of art!!! Beautiful built.. Personaly not much into mechanics, just a rider.. :-D so i would very appreciate if something like that was offered on the market in stock.. :-D
@EmilexStG Жыл бұрын
Built out like ah mf
@leffe88723 жыл бұрын
Du e från Sverige va Mike on Bikes
@lange-03573 жыл бұрын
You need a skid plate
@iainhutchinson3453 жыл бұрын
What are the 2 best mods?
@mikaelschill57474 жыл бұрын
Change to SELAB silicone grip cover, a seat cover made in Laxå Sweden, amazing grip many of the fastest Enduro rider in Swedish Championship use it.
@Zwiepmoto4 жыл бұрын
You should definitely mount some decent axle sliders and a muffler protector. And if you like some footpeg sliders, they are required on some of our supermoto tracks here in Europe.
@evanhall64933 жыл бұрын
Carbon fiber frame!
@kananisA753 жыл бұрын
After the engine the only thing left is fine tuning really, and making the bike comfortable to you by adjusting the contact points (seat, pegs, grips, handlebar).
@MrSpaha-kx7ie3 жыл бұрын
carbon wheels
@MicGil4 жыл бұрын
Hello, It would be nice if you can make a video comparing and explaining the various technologies of airbag suits :)
@sos87474 жыл бұрын
In terms of components you are pretty close to a world championship bike *except for that swingarm, usually people go for tecstra swingarms
@aka_dennis4 жыл бұрын
Both Mtr team and alot of riders use it
@wieliewonka4 жыл бұрын
Mtr has its own swingarm design now Previous it used tecstra swingarm
@sos87474 жыл бұрын
@@wieliewonka exactly
@cschwarz94484 жыл бұрын
your content has been interesting, informative, insightful and entertaining. please dont become a commercial. please.
@quandocevocevo55313 жыл бұрын
I love the SM quick shifter! It resolved my problems with my 701
@evantomer13363 жыл бұрын
What an incredible bike! Full titanium hardware from racetech titanium might be a good addition.
@daveyt4802 Жыл бұрын
Wow. 😳
@backstreamnorth4 жыл бұрын
Swedish gold is always the way to go if the budget allows for it! Really cool with the dual brakes upfront aswell (Trogen tittare från Sverige)
@JoseAntonioOU44 жыл бұрын
Paint job
@oom_7014 жыл бұрын
What is a full spec race engine? Feels like a total overkill^^ The quickshifter on the other hand seems like a good idea! :D
@zitronensuppe2634 жыл бұрын
Ich dachte schon ich wäre der einzige deutsche hier😂😂
@oom_7014 жыл бұрын
@@zitronensuppe263 Hay, ich habe doch englisch geschrieben!^^
@zitronensuppe2634 жыл бұрын
@@oom_701 tja😂 aber gut das der Typ 25 bis 27k für seine fs ausgegeben hat und noch ausgeben wird
@oom_7014 жыл бұрын
@@zitronensuppe263 Oh ja, der steckt in die 450er echt bisschen zu viel Geld.. xD Aber es ist mal cool zu sehen was alles möglich ist ;)
@zitronensuppe2634 жыл бұрын
@@oom_701 wenn er so gut ist um es zu nutzen ist ja OK... Nur irgendwie glaub ich nicht das er das kann😅
@theinnerdreamer70432 жыл бұрын
Ride it.
@otisjordan56134 жыл бұрын
You should definitely try out different engine mounts, FCP and CMT Carbon Compositi are the ones to look at imo
@imshizzling3 жыл бұрын
Custom graphics will definitely make it faster and stronger keep that in mind
@aseredy4 жыл бұрын
A good clean graphics kit always helps your lap times
@michaeltward28594 жыл бұрын
They do a swing arm for the 701 as well but no one seems to have one. Are they worth it in your opinion?
@awabyusuf25792 жыл бұрын
🇮🇩☮️♥️👍
@ChadOHara984 жыл бұрын
you should stop putting parts on it, cuz i wanna keep up with you haha jk your bike is so nice
@BrianEvansracer3 жыл бұрын
Thanks for sharing - any info on your lap times before and after the changes?
@johnridesadv25124 жыл бұрын
Killer build so far man! Such a trick bike. That swingarm is unreal.
@GrainGaze4 жыл бұрын
This is definitely the best looking Supermoto out right now. Amazing build.
@mnnic42924 жыл бұрын
Great bike, performance must be awasome. Cheers!
@MrJ0chem4 жыл бұрын
What you should do with the bike? Ride it like you stole it!
@mfacch174 жыл бұрын
What is the total cost of all these new parts and engine swap??
@bradr5394 жыл бұрын
Go faster would be nice..😁
@stevelarson69924 жыл бұрын
Ride it like ya stole it SCHWEEEET!!!
@scottyd22623 жыл бұрын
Run a FE fuel tank because they hold the fuel lower