Snap-On Pry Bar Set

[@MikesToolShed]

Shit. Didn't mean to release this one yet. Oh well, enjoy!

[@travisdavenport4064]

Mike's Tool Shed wheres the bbc pry bar

[@travisdavenport4064]

That things the biggest and bestist plus with what his names 10 foot cheater bar

[@rareform6747]

I dont post on KZbin . Can't you delete it or re edit ?

[@steventaylor5687]

Smashing on non striking prybars is just asking for trouble. Remember Mike use the right tool for the right job and you'll be fine ;-)

[@orlandogutierrez4386]

Some advice my dad gave was “Never buy cheap tools”. Have always used snap on and never have had a problem

[@scottpearsontoolsmore185]

Great set of pry bars. I have the big hft one and it's bent beyond repair. The set I have I can't remember if they are snap on or NAPA. They are old enough that you can't read anything on the handle or the metal part. I have used and abused them on heavy equipment. Retired know so everything I have know is getting a brake and used every know and then. Great video thanks my friend keep up the great work and see you in the next one

[@garylabelle9973]

Gotta put them in the van. No point in having good ones if you’re gonna use the cheap ones.

[@scottdavenport2967]

I got my green set today on sale $150. Great deal, and they feel great in the hand. Can't wait to put them to use.

[@blakewaddell451]

I wish they would bring the old hard handles back I hate the handles on these

[@JUSTINSTURGILLTRUCKING]

Matt Mike it is tough in this Electrical streets glad you got some really good prybars if you need something bigger they make the Excalibar that’s the 54 inch here that’s gets the shit done

[@BeardedSeabee82]

The Snap-On Junkie!!! Love mine

[@darthcollosus]

Sounds like you need to have the shop send you out a johnson bar I love those things for moving around gear

[@j.c.smithprojects]

I just bought 2 of these sets of pry bars just for the striking caps.i had the previous generation pry bars with the hard plastic snap on handles. i have the 36" also. many people love harbor freight tools.harbor freight tools have their place...it is just not in my box.

[@andrewgibbons8159]

They look great quality 👌 👏

[@TonyTheTechnician]

Great video bro I was waiting for this video. Looks like a really nice set!

[@gc7782]

Great set

[@fredflagstone9467]

No time for cheap tools. I have a mayhew set that I've used on everything including using them as a wedge during an engine pull and they've held up great.

[@JakeNaughtFromStateFarm]

I do own some tools from HF, but I never have nor will trust their pry bars. I’ve got that same set in green and love them. That big one you got was around $175, I believe. I like the bright colors cause they’re easier to find, especially when I was in the field.

[@dtnel]

So how much did pay for the black one? With Snap On it don’t make a difference what the color is price wise as they’ve realized people want different colors.

[@andrewhutchinson5490]

A great set of pry bars and leagues ahead of the older style snap on pry bars. Was that a craftsman pro that broke, the kind with the red and black rubber ergo handle. Those kind are the best craftsman made by Mayhew. If it was the kind with the plastic redish orange handle those are garbage. Great share.

[@snapcoallan5445]

I have the same pry bar set there great the small one comes in handy so much

[@joelopez40oz23]

What are you prying on? A military tank? I have been using the Craftsman pry bars for more than 10 years professionally and have never had any issues.

[@sams7169]

he shoulda just bought a crowbar and saved 400 bucks.

[@robswrenches9501]

So, I can't expect my Craftsman pry bars to handle a Ton without sacrificing a digit. Thanks for the heads up Mike. Ohh, the pain you've gone through for us. It does not go unnoticed. 😎👍

[@marcowens3522]

👍

[@AK74Man87]

Got the same 4 pcs set, mines in green tho. Same reason I got my set, heard of a HF one break and hit a guy in the face. I think mine was around 180 off the truck on sale, nice knowing I can get it warranted even if the tip breaks.

[@darthcollosus]

$130 vestil brand. Johnson bar it’s blue I’m telling you man they work great I just took on home from work to move my lathe in my barn.

[@danohstoolbox]

Ya the craftsmen striking cap is what u need

[@jonwalker4210]

I jumped on the SKs little cheaper but those snap ons r great 👍 SK makes awesome products it’s something you might want to look into.

[@ryleighlawrence6189]

You could get the harbor freight pry bars replaced under warranty.

[@mtnsleder2829]

Ryleigh Lawrence harbour freight won’t replace your finger tho!

[@CrankingOneOut]

I have these pry bars and I actually love them. I'm far from a brand croney. I own Sunex, Snap on, Gearwrench, Cornwell, etc. Snap-On pry bars are very good. Minimum flex and in typical snap on fashion, you can't get much better, but you also can't pay any more ;)

[@marcowens3522]

I own these pry bars as well and hate them they flex way to much they're way to thin.

[@pnutmal]

You might want to look at a burk bar or burk bar copy they are absolutely priceless for prying anything . Klein makes a really good pry bar kind of like a burke bar and I think it's called a gorilla bar or Grizzly bar . All of this bars should be able to be purchased for under $100 a piece . The one I have is a Marshalltown branded Burke bar and I got it at Lowe's for like $65 . Its a beast .

[@MikesToolShed]

Tony Limbaugh I worked with a guy that had one. It's on the list. They are awesome for scooting heavy shot

[@qzetu]

Mike, you really shouldn't recommend something that you have not yet put to use. I'm assuming you are assuming they are good because they are snapon but that isn't how it works. Take them to work and put them in the same suituation and then come back and tell us how great they are. Just saying.

[@johnpossum556]

He's a YT SO Princess now. Standing way above us, standing on higher ground.

[@NoGo90]

From someone who's used and owns them...they're good.

[@sams7169]

Imma laugh when he breaks them against b/c that job is not meant for those kinda pry bars.

[@danielputerbaugh2754]

Mike that is a nice looking set of pry bars. Really surprised to hear that craftsmen one broke, they have really good reviews on them.

[@HardKnocksForge]

I bet you were pissed because the other guys got to see you cry, again... Craftsman has a professional set that is pure killer, SK has the same set. It is cute that it came equipped with a Mike sized bar. Did your brother put you on to the snappy bars? I know he's not a real big fan of the Tekton pry bars he has...

[@TonyTheTechnician]

Hard Knocks Forge 😂😂😂 the Tekton set is not worth the money. They are so thin.

[@BeardedSeabee82]

Knockers lol. That 36er is noce one though

[@BeardedSeabee82]

TonyTheTechnician I should have shown my red prybar in my mts vid too lolol. Who woulda thunk

[@TonyTheTechnician]

Bearded Seabee82 lol you should have 😂😂😂

[@MrAnonymousRandom]

The Craftsman Pro ones aren't available in 36". I've actually tried ordering the 36" hard handled ones and for some reason they shipped the 31" one I ordered but refused to ship the 36".

[@cardsfanbj]

I've had my eye on those Craftsman Professional ones. I'm not using them for anything as big as you are, mostly just for future projects on my truck. But I've seen them on sale for $30.

[@antoniosalerno4433]

The BBC PRY BAR!

[@chadgardee1496]

You should try the hyper tough Walmart striking pry bar made in the USA and let us know if there worth buying

[@imeeducatediz7861]

Idk where you heard those are USA made lol. Hyper tough is mainly China

[@chadgardee1496]

Says it on the handle

[@chadgardee1496]

They look jus like the craftsman

[@upsidedowndog1256]

My friend bought SO prybars but the plastic case didn't fit in his toolbox. I put my Cummins Chinese prybar set in it. I spent 9 bucks, he spent 200. Prybars are a last resort solution in my book so my Chinese ones work just fine. Matco has some really huge ones that are really expensive if SO ones don't work out for you.

[@markrobbins9656]

I have the same set. I love them

[@abefish10]

Bro u should find someone with the snap on student discount I can get those for 83$ after discount

[@leeschanck4037]

My favorite are the mayhew prybars. I believe that they are the best.

[@Nordman555]

Less hand protection though?

[@garyrobinson5719]

I just bought that set on Thursday .. to replace my Craftsman ones I've had forever..no problem just liked the handle better .. so grabbed the 24" to check a ball joint today ... Man am I unhappy... The biggest one in the set just feels chintzy .. my Craftsman same size has a way thicker shank and dosent flex as much as that 24" snap on .. the rest are nice but I'm really unhappy with that 24" one

[@platter4]

Mayhew is the best they make tools for a bunch of companies

[@miguelmendez4718]

I think I’m going to wait for the I beam Milwaukee pry bars set. Waiting for some mad money.

[@brokebikemtb4448]

As long as they feel good in the hand and look great in the box...that's all that matters....

[@MFitz717]

Did you buy your snap ons brand new? eBay has some good deals on them. I used a 36" craftsman to move my parents wood stove and it worked fine

[@johnbrandonberg4257]

Those Strap On Pry Bar Will Snap Just Like The Rest! All you bought was the name! Lol

[@Hairychickenwings]

Was the Craftsman bar that snapped the red handle one?

[@wrenchspinner101]

Sweet Buick Grand National sticker!

[@sethc758]

Love snap on pry bars but I was popping a stubborn ball joint out with the big one you have there and the tip broke clean off. Just the tip. But got handed a new one so doesn't matter. Lol

[@sams7169]

id bge curious if the snap ons would hold up to that job too.. He needs a industrial bar for his job

[@BM4A]

Mayhew makes some great pry bars.

[@donwendling7800]

Who makes S-0 pry bars?

[@kennethstephens8046]

So difficult to resist the new mikes tool vid notification because I was just watching your giveaway vid when this notification popped ip

[@georgewahlers2249]

I'm surprised you didn't look into the Milwaukee ones little bit cheaper a lot nicer in my opinion

[@Tech-my1fo]

I have that set & 54” They work fine.

[@Crazy_clown6969]

So what are you gonna do if that 1 snaps just replace it just like Craftsman you would know a difference as you paid 3 times more for that 1

[@179kook7]

I have the same Pry bar and it broke just like t yours and I wasn’t even hammering it

[@stchman]

So he spends a bunch of money on those fancy Snap-On pry bars to help him with his work and is not going to take them to work. Makes perfect sense.

[@DOYLECLEVERLOBE1]

Hope your prybar feels better.

[@ATT158]

Anybody know the return policy of harbor freight. I want to return something but I opened it

[@MrAnonymousRandom]

I've got the Mayhew Dominators and the Craftsman hard handled striking ones and haven't had any issues with either of them. If you're going to buy the Snap on ones, at least use them on the job. It sounds like you are better off with a specialized construction pry bar.

[@sams7169]

yeah can't fault a well used hf non striking pry bar for not lifting a 2000 pound switch ...

[@ATT158]

I went to harbor freight the other day and I'm never stepping foot in there again

[@MikesToolShed]

Ariel Tunkel it's good for getting a boat load of tools in your hand now. This set costs just about as much as I've ever spent in that store. If I had to wait to save for all the quality shit, I'd be with out a lot of tools for a long time.

[@Mr_Cholmondley_Warner]

The only sting is only when you buy the tool, just don't lose them!

[@jessemase6986]

Me and the brother inlaw broke the tip off his snap on pry bar screwing with the exhaust on my f 150 any tool can be a dud snap on or harbor freight

[@1pcfred]

Ah, you have to use the right tool for the job. Pry bars are not magic. Steel only has so much tensile strength. What I'm driving at here is that for heavy work you need big levers. Even your 3 foot bar is not really that big. If I have to move something really large I got a 6 foot old school digging bar that I break out. It's over an inch in diameter, with about a 2 inch square head on it. If that don't move it then you need to use heavy equipment. The bar I have looks like the one on the right in this picture goo.gl/sVnajy

[@user-vz7zj5fe3f]

Same beat up fingy as me

[@laykenhutting4858]

Can you do a van tour

[@zachthompson5113]

The Mayhew USA made bars ain’t bad either. I’ve got both the snap on and Mayhew. The ends of the snap ones are thinner. See if you can get ahold of a snap on industrial rep. You can get your stuff much much cheaper.

[@Nordman555]

Do u prefer snap or mayhew?

[@Matt-mb5vr]

Sounds like you need a millwright to move your equipment. We got it from here

[@mackdaddy1911a1]

Lock those up if you don't have eyes on them. I bought my brother a complete set of channel locs . I mean everything they make including cable cutters. He is a Union Master Plumber and was working at a power plant during a shut down. Went in one morning and when he came back out his truck tool box had been broken into and every one was gone. So I got him a huge job box. A bit harder to break into one of those.

[@MikesToolShed]

mackdaddy1911a1 hell no sir. They aren't leaving my sight unless they are in my locked tool box in my locked shed

[@MikesToolShed]

Good to hear from ya Mac. Hows everything

[@mackdaddy1911a1]

Mike's Tool Shed trucking up a slow storm. Was in Memphis today. Heading to east Tennessee tomorrow. Brother you are collecting a nice little set up. Looks like oz have a nice following of Trolls already too. Looks like your channel is doing great. I hope you and the Mrs are doing well.

[@p_erickson8748]

You should look at buying a Burke bar

[@HardKnocksForge]

If you can't move it with a Burke, you'll need something with an engine.

[@vincentnightwolf]

Seriously, this is the correct answer for moving switchgear. I work heavy industrial at a mine. Watched 2 guys move a piece of switchgear into position in record time using a couple of Burke bars.

[@completepropertycare]

This

[@1pcfred]

I've moved Bridgeport milling machines around with Johnson bars. But companies should supply gear like that. No one is going to walk around with a Johnson bar in their tool pouch.

[@escaflowne33055]

geez. -_- you say you're done playing around but you continue to misuse tools...there is a reason why there are so many versions of pry bars. the Craftsman are USA so no inferior steel there and you snapped it, cause you have bad habits.

[@CapeSIX]

mayhew prybars are so much cheaper

[@Cisco2023]

Actually Craftsman prybars are made by Wilde Tools not Mayhew.

[@98chicagobears]

hey man look at the mayhew pry bars made in America 50 bucks. try them out.

[@DontM8-__-]

What in the heck is a switch gear??

[@sams7169]

its a very big electrical switch box. don't know why you'd be using those pry bars to lift it. They make industrial pry bars for 1/8th the cost that work better.

[@ThePipeiper]

Here’s to making an emotional decision, man. You could have just purchase an extra HF bar and use two in place of one. I’d also ask (because I don’t know and aren’t pretending to) is a prybar the right tool for whatever job you where doing. If it is, see first part of comment. If it isn’t and you’re using a prybar because it’s the more convenient tool than maybe you should use the right tool. This is JUST AN OPINION. But I wouldn’t have went out and bought $250+ in Strap-On BS when I could have just taken the HF back and got free replacement and picked up another, for extra leverage, for about $10. Hell you could’ve even grabbed your buddy a new Shaftsman and bought him lunch for his troubles. Your finger will heel. Just as sure as those Snap-Ons will fail you one day. This isn’t a criticism for all the S-O fanboys out there so spare me the hate mail. You don’t go out and buy a new truck because you smashed you finger in the door. And you don’t go out and pay 280+ bucks for a $10 problem. IJS

[@truthteller678]

The Pipe iper hey BITCH, if you don’t like SO just don’t buy! DO WHATEVER THE FUCK YOU WANNA DO!!! Let others buy snap on if they want too! HATER .

[@sams7169]

yeah it's just a better version of wrong tool for job. It's like I buy a cheap non-stick pan and am mad it won't sear meat well.. So I thetn buy a $200 nonstick pan in anger.. The wiseman gets a 20 dollar cast iron.

[@RecklessEnterainment]

As far as pry bars go there is literally nothing that compares to snap on. I’ve bent so many other pry bars and I literally have chipped the end or bent any of our snap on pry bars

[@BeardedSeabee82]

Man after my own hear. Good set, but even if you chip tip bad enough, swap em out on the rruck, done it a few times this year. Hope you like the vid i made for ya lol

[@LukesAmateurHour]

If you bought it to keep from breaking your hand in half, go use it man!

[@dizzyknutsak9462]

He’s taking the snap on’s on special occasions 🙄

[@machiningbasics1729]

Have you ever tried snap on instinct grip screw drivers ? There great miles better that wiha wera Kline etc

[@athhud]

Wera laser-etched drivers are the only ones I will buy from now on. I will gladly trade a single Snap On Instinct driver for a set of Wera.

[@machiningbasics1729]

athhud well , there screwdrivers so it’s whatever feels best to the user. Cheers for pointing that wera range out il have a look at them, cheers !!

[@rareform6747]

cool beer can , was born in Baltimore and left for Texas land of the free until Californians moved just to bring there bad habits with them ....

[@tsfv22]

I just use a tire leaver and a crowbar

[@travisdavenport4064]

Wheres the bbc prybar?

[@BlindBatG34]

Breaking a pry bar in half... That's some scary stuff.

[@johnpossum556]

Rebar would have worked better, it would not have broken since its lower carbon steel.

[@rjlewis8346]

Can’t really be mad at the pry bar for user error lol

[@joewyatt8413]

Awesome!

[@asmautollc]

You liked those Snap-On handles. I don’t blame you, but I wonder if that Craftsman was Taiwan. These won’t snap: sears.com/craftsman-professional-3-piece-curved-blade-pry-bar/p-00943288000P Made by Mayhew who probably makes those Snap-On bars. Nor will this: sears.com/craftsman-36-in-pry-bar-with-strike-cap/p-00943387000P Made by Wilde Tool. Key is to make sure the bar goes to the end of the handle, or at least isn’t plastic, which you just proved to everyone Pittsburgh does not and is. Also good quality bars get thicker as you go up in length to handle higher weight. A 36” should be 5/8” tempered (USA) square stock steel.

[@asmautollc]

Here’s some deals on the Mayhews: www.tooltopia.com/mayhew-tools-81300.aspx www.tooltopia.com/search.aspx?find=mayhew+pry+bar

[@asmautollc]

Get you that 58” incher. She’ll budge whatever you’re working on haha.

[@TooljunkieDave5215]

I don’t think someone else can warranty your tools for you.

[@johngibson3594]

Pumping out the vids mike

[@mdlee52]

The people need to know what happened in #mikeshole

[@schoder78]

I would never trust Harbor Freight when it comes to heavy duty equipment or machinery work.

[@davidaxt8628]

I too have been hurt by exploding cheap tools. Years ago I was working on galvanized house plumbing that was "frozen". The cheap pair of channel locks exploded in my hand and cut my fingers. I was so angry that I marched into my garage and emptied all my tool boxes on the garage floor. I sorted through each tool individually and if it was a quality USA made tool it went back into the tool boxes. If the tool was cheap foreign made tool went into a cardboard box and was given to a friend who does not have a lot of money. Then off the the hardware store with a list of tools that I needed to replace. I really try to avoid cheap tools but it is getting harder and harder to find good USA tools anymore.

[@MikesToolShed]

+David Axt it is getting harder but there are still a lot out there. Chsnnellock, klein, some husky, some craftsman, some tekton

[@the86125]

It's too bad Snap On fell for the dildo handle craze, nothing says quality like a big goofy misshapen grip. They are some tough ass bars though

[@majorgreig1]

doesn't sound like your done messing with crap your not bring good tools to everyday work why spend so much to put in the box to use once and a while hmm that sounds diffrent

[@laykenhutting4858]

Damm those r nice

[@kristoffMR]

Buy cheap pay trice !

[@jetjazz05]

Damn, I got a really nice Craftsman set of same sized pry bars on sale for $20 this year. Best part of all is they were forged in the USA. I know they were probably clearancing out the "OLD STYLE" made in USA parts just to flush them out of the store, but still that was one hell of a bargain. It's a shame that now to get some nice Pry Bars you've got to pay Snap-On price for it. People really didn't know what they were doing when they stopped buying Craftsman's made in the USA stuff and left for Husky or Kobalt or something. Sure you saved a few dollars, but now there's no quality middle man USA part anymore! If all they make are Indian pry bars that are brittle and shatter and you have to pay $100 for a Snap On... well, the consumer created that gap.

[@NextGenesis88]

6,666 views. heh.

[@bella5241]

Good video

[@THISisglmicle]

Enjoyed your description until the swearing. Sorry

[@briansouth9325]

118$ is what I paid for the big one off the truck

[@elderfarms]

bonus video 😋

[@bryandavis341]

They are not made to look at. Put them to work!

[@sams7169]

maybe he can try to pry up a tractor then get mad when his snap on breaks.