Muffler delete Bwahahaha... Have you ever heard a CAT bark?

[@lawrenceveinotte]

In 1972 my Dad and i flew to Oshawa Ontario to the IH plant to pick up his new Transtar 4300, 318, dual stacks, he was so excited, window down, his head out the window listening to that Detroit, lol

[@KyleJewell]

Looks great, sounds great. Duals will definitely be an added bonus.

[@Warren1974]

That Kittie has a Loud purr

[@michaelvrooman5681]

Most truckers I know cut the stacks just high enough so the exhaust stream does not blow on the load or trailer. No higher, no lower. Shorter pipes mean more clearance to go under things. 13' 6" is max height on a stack in the U.S.. Working in a truck shop, I have several styles of fuel caps with 1/8 " pipe threads tapped into them and use a 1/8" air valve to pressurize tanks for various reasons

[@stewartarmstrong3215]

Sounds awesome. Love it. Put a shorter "mitre cut" tip on the top. It'll look better. Can't wait to see Low n Slow with the dual pipes.

[@jeffferanec4526]

U R making my kind of music Mr.Mike! Thx for sharing.

[@burnoutking0712]

bout time eh? Sounds Good Mike!

[@shanewilson1679]

Sounds amazing Mike. I love it. Very cool 😎

[@dropbear6740]

Little CAT with straight pipes sound great but a big CAT V8 with straight pipes sounds awesome

[@matthewrogerholdcroft7773]

The single exhaust sounds great, looking forward to dual stacks. If you want, you can change the ramps for longer ones with hydraulic or pneumatic systems to raise and lower them. Interesting method of transferring fuel from 1 tank to the other, simple and effective.

[@vaughnhill3437]

As far as you t for your strait pipe is to put the t right at the pipe you already have and just run it over to the other amd turn it strait up. Miter cut pipe tips or turnouts

[@dalemiller4457]

Looks good, should look up Jack's Chrome Shop they are redoing a K100 cabover.

[@fireguy0020]

i like the new exhaust, from the back and side, i think it looks to high, but from the front it looks cool, but it's your truck, you just do what you like, looks good regardless

[@jeffreykbevins7116]

I would like to see it with dual stacks and I do think that the single that you put on is a little to tall. I'm loving what your doing with both trucks, and I love to watch the videos as you do something to them each time. I don't always catch them when they are up at first, but I try to see them as I have time. Be careful and stay safe and keep on restoring the trucks. And I will be looking forward to each new video. I live on my farm in Lawrence County, Kentucky. That is in Eastern Kentucky, the town of Louisa, KY, which is the home town of the county music singer Ricky Skaggs. I live about 7 to 8 miles from where that he grew up on a farm, at Blaine, KY. Catch you later !!! As always, Jeffrey !!!

[@ericdutton117]

With turn outs or curved stacks there would be less chance of rain to get in exhaust if sitting out side. But duals always make the look much better.

[@brucehodges7889]

I like the backup lights, they look high enough so they won’t blind you...

[@albydigiammarco3373]

Very nice, the Jakes sounds good. On a smaller truck like that, this is a personal preference, I'd leave the single stack but I'd have one complete straight piece and slightly shorter.

[@jeremiahrindahl4117]

Sounds perfect! I drive a C12 with "modified" exhaust. There's just something unique about Cats and their turbo whine.

[@TheJstewart2010]

I agree that it's way too tall. Personally, I like the curved top instead of the miter cut. Keeping water out of the pipes looks a lot more difficult with the miter cut as well.

[@NOgo54]

I like the exhaust, think it should fit in your garage. That Pete is sharp and seems very useful.

[@franklackie2469]

I got faith in you mike u will get her done

[@dwightcorbett8889]

A barking cat, awesome! I'm thinking a curved tip looks better as long as it's still a single stack. The angle cut looks great on a dual stacked truck. And yes it's a bit tall, needs to be shortened. Otherwise, I love it.

[@truckingwithwim8039]

Sounds great, great video too, greetings from the Netherlands, have a great day!

[@neilcampbell3875]

I like the pipe you installed. With duals, it will look awesome.

[@kennylovettshow]

Mike, so on the door panels of that truck. The grad handle piece, take the screws out and take the whole piece off and you can peel off the black plastic cover, get some adhesive remover, clean the glue off and you can polish it up and make it shine. That's aluminum under the black plastic stuff.

[@mikethetrucknut]

Ohh... Okay

[@keithchapman7220]

Also, I love to see you and your dad work on Kenny together!!

[@ED-ti5tc]

Loud pipes and Jake's brakes save lives! Always safety first. I like it! Lol

[@stovebolt448]

Thanks for the video Mike, and yes it's to tall you also need duels with mired cuts.

[@jeffherdzina6716]

I'm liking the ideal of dual stacks instead of a single. And a little shorter.

[@robertgarrett5009]

You need to install some pneumatic rams for the ramps, even if they just assist you raising them, same as the cab jack. Trucks here use a hydraulic ram system from the cab.

[@mikepatton5251]

I love it she sounds good

[@MrBikerider84550]

I like the idea of dual pipes and it looks good ....... BUT ...... I'm not a fan of the mitre cut , but ya duals would be great !

[@tossedsalad5532]

Window crank top should be 2 O'clock position then you can't catch it and easy spot for hand to grab for rotate

[@robertwenzell9510]

I'm liking what your plan of attack is.

[@lawrencepevitts2434]

Put the original window crank back on & get a replacement knob. It would probably look better with the diameter transition below the shield. It wouldn't look so funky.

[@docnelles1249]

Nothing wrong with the height. I like the angle cut. Looking forward to having tandem pipes. Maybe put on 8 inch ones to really accent that throaty sound. The new pipe definitely let you hear the turbo out when accelerating. Both trucks will be fantastic when you finish them.

[@TheBlueberry606]

That looks a little tall, will it fit in the garage? And whats the lowest bridge you have to go under?

[@jameslcoble248]

I think Jamie Davis would like that cabover

[@danspak1671]

FIVE INCH TURNED BACK! KEEP IT OLD SCHOOL.

[@seanmeyer6243]

Sounds beautiful. I can tell you're getting more comfortable driving it than when you first got it. Great job walking it down the gears. Good video.👍

[@Smokey_Yote]

I would recommend one of those muffler bypass valves so you can have a quiet and loud truck at the flick of a switch

[@davidsimons6881]

She sounds good

[@christopherjohnson6056]

What’s the hourly rate for fitting a window winder

[@tommiehoff3863]

hi tommie here from manchester ct following your blog it sounds great ! should really growl with two pipes?? tom

[@chrishunter5041]

Sound great, is there a stack height limit in Canada ?

[@seanoliver4531]

Music to my ears 😎

[@raujla]

Do you drive the Corvette's on those dirt roads? How do you avoid the rock chips?

[@mikethetrucknut]

I drive very slow to the pavement. Thankfully I'm not far off the hyw. But our roads are bad for debris

[@kennethroberts563]

Mike, that sounds good with one pipe on it put two and you will really rock the neighborhood for sure, but if you really want to get a good sounding get you a CAT3408 engin

[@jordangraff2254]

5 inch Chino stacks on the far outsides with dual air breathers on the inside.... 😤😎 And 14' is fiiiiine 😎👌🏻

[@JasonfromBiripiCountry]

Guard looks good, just need to be shorten in height to get it to be portion right with cab. Cheers Jason

[@mintyman1968]

Sounds mint buddy

[@tommyhall8301]

Hellow mike how are you alow slow have a great weekend buddy see you soon

[@mikeseeley3669]

Hey Mike, I think it is a little long (Dorkey) maybe a little shorter and tipped back towards the side

[@roadwolf2]

Dual stacks with flappers and twin air rams would be tops

[@caterpillarslim1288]

Mike she sure sounds good! What motor does she have?

[@scopeskyee9388]

I'm in the uk, loving the channel dude beautiful trucks

[@mikethetrucknut]

Thank you 🙏🏼

[@Fetguf]

ohh noo, not straight pipe. You know when it rains, water will collect at the bottom, and when you start it again....black rain will fall on the cab.

[@derrillbalshaw1199]

That top piece looks a little odd and out of place with being a larger diameter than the lower piece. Almost looks like a funnel.

[@dwightcorbett8889]

Yes, I'm not a fan of that top piece either, but the rest is alright.

[@vaughnhill3437]

I would go one size smaller tip . It looks a little funny with the tip being bigger than the exhaust pipe. Just saying. It sounds pretty good though

[@MegaEaglelover]

Straight 8’s miter cut at 12 feet tall would look 👀 awsum 🤘🏼🤠🤘🏼🤠🤘🏼🤠

[@irishpiper1262]

Dual stacks would look really good on it and a little shorter

[@hanserikkratholmrasmussen6623]

What do I think? Well in my humble opinion the pipe is too long. Dual and a bit shorter would be a lot better.

[@sandrocksgarage1970]

Little too tall need to bring it down some. Looks great

[@bigb2956]

Nothing like playing with your toys

[@kentkundinger7087]

Go with dual curves will look so good

[@Nightmear174]

U can’t beat the sound of those jakes put a smile on my face

[@TheAllfi]

Be happy for 216 dollars here in Sweden, the equivalent of wood costs about 367 dollars

[@brocluno01]

Hmmmm. Noisy and a limb catcher ... Me, I'd want quiet so I could listen to tunes :-)

[@DavidLopez-ho2mb]

Mike, low n slow sounded great, especially with the Jake brakes.

[@franklackie2469]

Yes your correct sometime u do need duals

[@Roadranger1944]

Oh I hear you have a Jake😀😀😀

[@nathanuledrudge4820]

You need full 6in or 8in straight dual pipes and that would look hot

[@michastoute1050]

Yeah now it's sounds like a truck instead of a old Volkswagen van. Great work 👍.

[@russellmcknight7226]

Prices here in NB are bad here too, but I think you're wages are higher than ours.

[@neilh6217]

To tall for the cab eh bigger dia duals and you know I love the flappers eh

[@JT-1969]

Can’t wait to hear the bark with duel straight pipes, better yet, bet the jake brake will sound even more awesome! The Canadian tax is crazy, I’m in the states and pay Canadian vendors, you all have GST, HST and PST taxes, not every province is the same.

[@mikethetrucknut]

Yeah it's crazy. Alberta is the best for tax they only have 5% gst

[@islandbushcraft]

Good work!!

[@kevinwallace4744]

Mike like the show. How about dual stacks and a air snorkel in the middle. From VI

[@daddywoofdawg]

stack is too tall, and I like the "bull horn" type tips (bends to the side)

[@peterselten500]

Check out boy in the areodyne by brad buckland an trucking in the big country show you some ideas on stacks an intake

[@jaredmoore5991]

I like the idea of shorter. If you set them up for about 13' 4" you will clear everything. As far as the cut... what ever you like 👍 Also though if you do a cut or flat top remember that rain water and any time you wash it the water will go in it 😉 ( I have that problem with my work truck)

[@petahdickinson1782]

Just a idea of thought 💭 could you turn low and slow into a tilt tray I realise that everything cost money anyway it’s just an idea mate

[@mikethetrucknut]

I'd love a tilt deck.

[@spannerworx7106]

I'd chop that folding ramp tail off and have a flat single fold hydraulic ramp. Long as possible. I'd even consider some ramp extensions and stash them under the bed just in case. You could make the fold up ramp have mounting pegs in at different spacing for good flexibility for the ramp extensions. Air suspension dump also.

[@benmac940]

How it is gives you the ability to use the entire thing as a flat deck if required though. Which was the appeal with that style, where I am anyway.

[@angelicchandler8275]

A little tall, but I like the look and the sound

[@professorwot]

With Dual stacks u always want dual breathers in between them.

[@tommyhall8301]

Sounds a lot better buddy take care

[@richardsantink]

Mike Mike Mike Mike... I love this channel, but I'm sure I didn't hear you going up through the gears with the Jake on... what's next? One of those insanely tall shift towers with a skull on top??? ;)

[@mikethetrucknut]

Lol, it wasn't honest it makes a noise going into gear. With the cable shifter.

[@richardsantink]

@@mikethetrucknut my faith is restored.. ;)

[@Bman2020]

Sounds great 👍

[@stansdds]

Looks tall to me. Sounds a lot better!

[@royhunt7096]

Shorter turn outs. I don’t like the two piece pipes looks dorky but sounds nice…

[@jimhaldane6273]

Pipe looks good

[@johnmcgreevy742]

Dual pipes will look great. That one is too tall lol. I'm liking flat tops as well

[@bighoss11]

Yeah be a lot better w duals but I probably run Ozzy or the Chico's Stack tips tho

[@gabedalley4091]

Little shorter flat tops with rain caps Mike.

[@leroymickle2998]

So Mike, I would like to straight pipe my work truck and I'm looking for prices.

[@russelltrupia4479]

I like it but it is kinda long go with straight pipes and curved tops.

[@kizerbread]

I think the newer style stacks look like total shit. On all trucks. The regular 5in pipe with the 7in tip 🤢. Just get a straight chrome pipe in 5in or whatever size you want. Same size pipe the whole length of the stack down to the elbow. straight cut with a rain cap flapper.

[@MrHristoB]

I like your toys Mike ;-D What if you fit hydraulic ramps on Low&Slow? And replace that shabby deck with fine Canadian timber deck :-D And also if you could consider little diecast models merchandise of you trucks, I'll grab some. Keep doing what you doing. Greetings from Ireland!!

[@mikethetrucknut]

That's a great idea, hyd ramps would be fantastic these ones are really fricken heavy.

[@alanziggysegee]

I like it be cool to have it the same on both sides like it is now just a little bit shorter

[@alpharaptor7510]

Look good Sounds killer Have you ever thought about turning the fuel up a pit to roll some more Coll