Take 2, I just wasn't feeling that tall miter stack.

[@archangel729]

Run your stackes on either side by the corners and the intake in the middle with the intake facing over the cab .

[@lwilcox7418]

Love it Mike, much better. I wasn't really feeling the slash cut either 😁

[@michaelcooper6800]

Mike, that looks so much better. The other stack was so tall snow was settling on it. Will look great with twin stacks.

[@garyablett5180]

the Aussie expression is "that's stacks better" (much better), cheers

[@stefantrnacek1394]

That looks better. Now you just need the second stack.

[@benmac940]

Yeah looks far better, just looks to far in, I think it would look better further out.

[@mlg223]

It looks nice with the new exhaust tip. I agree with you in that it will look nicer with dual exhausts. Good call 👍

[@shadow_frostbite]

I think short stack peeking just above the cab would look pretty good

[@JasonfromBiripiCountry]

💯 brother, twin stacks with air cleaners as well

[@dwightcorbett8889]

Much better. Keep up the good work, looking forward to the ongoing progress.

[@erichouser6337]

I can’t wait to see you put duals on it, and yes she looks good with the new exhaust tip.

[@BrokenWrenches]

Much better. The previous tip looked like a cucumber balanced on top of a straw.

[@starrcenter5395]

It does look better than a very tall straight mitre cut. I like single pipes on in-line engines and doubles on the V engines. Then again all Petes look very good in all configs.

[@brianmoser260]

That looks lot better I really like that short stack with the exhaust coming out the side then the straight pipe I would add a 2nd pipe the same way love the parts you pick up hope they can be clean and polish up and dents remove from the use parts

[@keithchapman7220]

I like the curved stack better, I agree with you about making it lower.think it would look great the stacks just barely above the cab.

[@grem72mu]

New stack looks so much better 👍

[@dandersonjr]

I think if you had the same diameter pipe from top to bottom it would look much better. Like somebody else said it might also look better if the stacks were out closer to the corners of the cab. In any case it's a work in progress so you'll figure it out.

[@apolloniaaskew9487]

I agree. Makes the Pete look a lot better.

[@timatwell3728]

you definitely need duels on it and run duel air stacks up the back also that would be old school cool for sure it's coming along it takes time to get them right. if we only had a geeney in a bottle that could grant wishes but keep at it you will get there

[@patframpton6193]

Much prefer the curved stack. Looking good Mike.

[@rodgerdavis2045]

Looks way better but definitely needs Two!!!

[@franklackie2469]

Yes, u got my approval mike really enjoy your adventures with the cabover s

[@iamrichrocker]

Welderup is awesome Dude..and a master at his crafts..and at having insane fun times..

[@robertgarrett5009]

Second stack needs to be a Intake stack.

[@crackerjack5210]

Agreed! make it nice and tidy and go with the "minimalist'' single stack, it really works on that truck.

[@kpfpv8515]

I agree...an air ram would do the job

[@BllNlsn]

Yes having seen both I like the curve much better

[@rottoratrodrusttohotrodaka3550]

Looks much better with the lower kick out that is blended into the exhaust shield. Powdercoat the take off bumper and put it on your Peterbilt. Do your mounting fab work first and get all the trial and error stuff done first with the bumper before powder coating it.

[@angryyank]

I like the dual stacks.... I would replate that old bumper if your liking it

[@banzaii6285]

Much better !! Other one looked goofy, an now it'll clear that door with ease 👍

[@garymaynard7562]

I think twin stacks would look fantastic!

[@TheBlueberry606]

Looking better. Thats awesome 👌

[@irishpiper1262]

Looks a lot better. Duals would look really good old skool

[@jeffreykbevins7116]

I like the shorter curve, but I am wondering what it would look like turned to the back, instead of the side, but would it throw stuff on to things that you would be hauling on the bed, how about maybe at an angle out to the side and back.. Just to be a little different. As always, Jeffrey !!!

[@wtfover4931]

You just won't be happy until there is two.

[@25slider]

I think it looks so much better

[@garydault8805]

That’s much better than the goofy straight pipe!

[@TeamTopKick]

I think it look better with the tip facing straight back instead of to the side until you do the dual stacks then turn them out to the side.

[@brandonkahuna1251]

That looks a lot better!

[@russelltrupia4479]

Good choice, you are right go with two

[@tommyhall8301]

That looks good do need 2 stacks buddy good luck

[@lornperkins4270]

I would have bull horned that stack..or flat top with the raincap on top

[@garrettchapman7137]

Looks a whole lot better

[@stanleyflory6702]

I like the second curved out stack much better! You are not pulling a 13'6 trailer, so the shorter stacks look better!

[@matthewspindler2665]

Looks fabulous

[@garykemp6436]

2 stacks always look better but you need a shorter shroud and the shroud needs to be the same diameter as the one to fit the muffler

[@charlesvrogers]

Looks good Mike

[@grem72mu]

Mike have you considered some polished aluminium rims..... YEAH

[@gerryspang5917]

Still like the bevel stack, but duals. Like the curved stacks set at 45 degrees. everyone has their own opinion, like the way the truck is starting to look. Stay safe my friend.

[@briansmith5235]

Curved out is definitely more awesome looking

[@kirbyglover3868]

Yes that would look great 👍

[@tuk2433]

Looks great 👍

[@vaughnhill3437]

Yea now that you cant see the pipe size difference it looks alot better

[@hotwheelmanraven2289]

I like it perfect now you got to get another one

[@KingDrefromDaA]

Looks way better good call

[@skylarsoper241]

Yeah mike I like it , looks awesome

[@scarlett-walker4908]

second stack it sure needs Mike 😋

[@stovebolt448]

Ya need 2 of them.

[@robkelly9397]

Why not keep it "industrial" for now, a neat short bend just above the cab? Actually it looks quite good from down low at the front!!

[@anthonyyoung7344]

That looks alot better.

[@alpharaptor7510]

Does it still sound awesome

[@MjK931]

Two will look outstanding 🆒🆒🆒🆒🆒🆒🆒😎😎😎😎😎😎😎

[@holdenbrougham1923]

go the 7 inch curb style mike , looks much better, get the aussie style stack , even better again

[@firemedicseven]

Much better than the tall one.

[@simonharris1804]

Much bettera even bettera with its twin up there cool 😎

[@gasparini76]

You forgot to put on your orange gloves?! dammm lol

[@EthansAviationYYC]

Looks awesome!

[@jonvanhouten8369]

Does look better, second one will finish it off.

[@kirktitgen2309]

That looks wicked …I hate the mitre cut stacks …they look unfinished and collect water

[@maxfly7079]

It still looks like A Low Clearance Reminder...lol. no more than a A foot above the cab and a rain cap. I still like the name, PiggyBack...or Back Haul.

[@mikethetrucknut]

Ohh yeah Back Haul is a great name. 🤔

[@maxfly7079]

@@mikethetrucknut Maybe 3 fires lately, in the fireplace during Winter, here in Arizona. Some years back, it was every night for added warmth...had a back shield to reflect heat. Enjoy your C7 Corvette while the weather is good...me too, in my C7 convertible, 300 sunny days here.

[@leighwalker3914]

Good job.

[@carlthor91]

Try the 5 inch!

[@geesss8675]

Your dealer encountering any issues with Peterbilt having a shortage on DEF take leve sensors and a problem with the failing causing the system to go into limp mode? Are you recommending a Peterbuilt Mike solution?

[@bradh7472]

I agree I was going to say the other stack was to tall.

[@74charger44]

I agree with Tom l.

[@joeyclark789]

Hey just wondering....if you dont use a truck like that for work, could a person drive one daily without a cdl. Because a cabover would be in my future for sure if I could legally drive it as a vehicle every now and then.

[@mikethetrucknut]

I think you could as long as you don't register it for more than 15000kg but you would still need an air brake endorsement

[@hamp1974]

i like low and slow wish i had one, but i do have kennys sibling.

[@chakagillis]

So what's the deal with cummins. I'm hearing yet more delays and more surcharges 😪😪

[@mikethetrucknut]

Yup, it's not just Cummins though parts issues of all kinds. More surcharges and fewer trucks available ☹️

[@andresimons8553]

Hi everyone maybe you could make an air intake at the otter side have gun

[@MCI1392]

Much better!

[@charlesferebee263]

That looks alot better than that slash cut. Plus it was way too tall. 2 7 inch curve out pipes set at 12ft 6inches will look really good. Just Saying. 🇺🇸 👍😎

[@mikethetrucknut]

I have another straight pipe, just need another sheild and curved top.

[@glennbryant1292]

Mike starting to dial it in he's a little slow .

[@davidsimons6881]

Looks good

[@kwshilts]

Much better!!

[@rupertwelch893]

Have that bumper rechromEd

[@vaughannewton4430]

Mike that's a lot better mate.

[@slagcat]

I think it would look better twin stack moved out to the corners ll

[@patrickratchford7026]

Add a second stack and get back to work on KENNY please.

[@jeffusher4854]

Much better the other one looked terrible where it joined into the 5”

[@mikethetrucknut]

Yeah I agree 👍

[@johnanderson5256]

Looks better

[@Graveltrucking]

Excuse me Michael why is you're license plate on the wrong end of the truck 🤷‍♂️ I'd thought I would see a hockey stick on the exhaust 😂 Low and Slow needs duals not sure if the C10 has enough exhaust you might have to have a dummy pipe.

[@mikethetrucknut]

Lol yeah.... I wasn't sure if a private plate should Ha e the decal on the back 🤔 but I think it needs to be on the front due to the GVW. I was going to call someone but... Haven't yet.

[@Graveltrucking]

@@mikethetrucknut Low and slow the sticker has to be on the front. Luckily the boys in blue haven't caught you yet that's an easy fine.

[@aengmax]

Looks better....

[@kblack356]

Either way it's nice

[@jimruby9316]

Dual stacks

[@bobcrosby8998]

Thats much better

[@randyhale4181]

👍🏻👍🏻

[@evloftis4143]

ya thats way better

[@hotwheelmanraven2289]

Put another one on the other side and cut out a nice diamond shape window

[@DLSWV]

👍😉

[@redmantas9294]

Still too tall...another 10 or 12" off and it'll look correct.

[@robertfranki5477]

still could be lower

[@jalopyjoe4483]

Was hear

[@JamesPretty]

Looks good Mike