MikroTik Tutorial 12 - 2 WAN Load Balancing| Setting in Hindi & Urdu

Script:
/ip firewall mangle
add action=accept chain=prerouting dst-address=192.168.10.0/24
add action=accept chain=prerouting dst-address=192.168.11.0/24
------------------------------------------------------------------------------------------------------
Script:---------------------------------------------------
/ip firewall mangle
add action=accept chain=prerouting dst-address=192.168.11.0/24
add action=accept chain=prerouting dst-address=192.168.12.0/24
add action=mark-connection chain=input in-interface=WAN1 new-connection-mark=\
WAN1_conn passthrough=yes
add action=mark-connection chain=input in-interface=WAN2 new-connection-mark=\
WAN2_conn passthrough=yes
add action=mark-routing chain=output connection-mark=WAN1_conn \
new-routing-mark=to_WAN1 passthrough=yes
add action=mark-routing chain=output connection-mark=WAN2_conn \
new-routing-mark=to_WAN2 passthrough=yes
add action=mark-connection chain=prerouting dst-address-type=!local \
new-connection-mark=WAN1_conn passthrough=yes per-connection-classifier=\
both-addresses-and-ports:2/0 src-address=172.16.0.0/16
add action=mark-connection chain=prerouting dst-address-type=!local \
new-connection-mark=WAN2_conn passthrough=yes per-connection-classifier=\
both-addresses-and-ports:2/1 src-address=172.16.0.0/16
add action=mark-routing chain=prerouting connection-mark=WAN1_conn \
new-routing-mark=to_WAN1 passthrough=yes
add action=mark-routing chain=prerouting connection-mark=WAN2_conn \
new-routing-mark=to_WAN2 passthrough=yes
/ip firewall nat
add action=masquerade chain=srcnat out-interface=WAN1
add action=masquerade chain=srcnat out-interface=WAN2
/ip route
add check-gateway=ping distance=1 gateway=192.168.11.1 routing-mark=to_WAN1
add check-gateway=ping distance=1 gateway=192.168.12.1 routing-mark=to_WAN2
add check-gateway=ping distance=1 gateway=192.168.11.1,192.168.12.1
--------------------------------------
add action=mark-connection chain=input in-interface=WAN1 new-connection-mark=\
WAN1_conn passthrough=yes
add action=mark-connection chain=input in-interface=WAN2 new-connection-mark=\
WAN2_conn passthrough=yes
add action=mark-routing chain=output connection-mark=WAN1_conn \
new-routing-mark=to_WAN1 passthrough=yes
add action=mark-routing chain=output connection-mark=WAN2_conn \
new-routing-mark=to_WAN2 passthrough=yes
add action=mark-connection chain=prerouting dst-address-type=!local \
new-connection-mark=WAN1_conn passthrough=yes per-connection-classifier=\
both-addresses-and-ports:2/0 src-address=192.168.30.0/24
add action=mark-connection chain=prerouting dst-address-type=!local \
new-connection-mark=WAN2_conn passthrough=yes per-connection-classifier=\
both-addresses-and-ports:2/1 src-address=192.168.30.0/24
add action=mark-routing chain=prerouting connection-mark=WAN1_conn \
new-routing-mark=to_WAN1 passthrough=yes
add action=mark-routing chain=prerouting connection-mark=WAN2_conn \
new-routing-mark=to_WAN2 passthrough=yes
/ip firewall nat
add action=masquerade chain=srcnat out-interface=WAN1
add action=masquerade chain=srcnat out-interface=WAN2
/ip route
add check-gateway=ping distance=1 gateway=192.168.10.1 routing-mark=to_WAN1
add check-gateway=ping distance=1 gateway=192.168.11.1 routing-mark=to_WAN2
add check-gateway=ping distance=1 gateway=192.168.10.1,192.168.11.1
--------------------------------------------------------------------------
Load Balancing in Mikrotik Router Board.
Load balancing a with multiple gateways 2 WAN Links
10 Mbps + 10 Mbps = 20 Mbps
/ @hadinetwork
• MikroTik Tutorial 16 -...
• MikroTik Tutorial 15 -...
• MikroTik Tutorial 14 -...
• MikroTik Tutorial 13 -...
• MikroTik Tutorial 12 -...
• MikroTik Tutorial 11 -...
• MikroTik Tutorial 10 -...
• MikroTik Tutorial 9 - ...
• MikroTik Tutorial 16 -...
• MikroTik Tutorial 8 - ...
• MikroTik Tutorial 7 - ...
• MikroTik Tutorial 6 - ...
• MikroTik Tutorial 5- R...
• MikroTik Tutorial 4 - ...
• MikroTik Tutorial 2- B...
• MikroTik Tutorial 18 -...
-----------------------------------------------------------------
hAP mini, hAP lite
CRS1xx, CRS2xx, CRS312-4C+8XG, CRS326-24S+2Q+, DISC, FiberBox, , LDF, LHG, ltAP mini, mANTBox, mAP, NetBox, PowerBox, PWR-Line, QRT, RB9xx, SXTsq, cAP, hEX Lite, RB4xx, wAP, , RB2011, SXT, OmniTik, Groove, Metal, Sextant, RB7xx, hEX
CCR
RB3xx, RB600, RB8xx,
cAP ac, CRS305-1G-4S+, CRS309-1G-8S+, CRS317-1G-16S+, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, DISC AC, hAP ac², LDF ac, LHG ac, , SXTsq (ac series), Wireless Wire,
RB230, X86
2.4 GHZ, 5 GHZ,dual radio,
Using the Device Discovery Tool
How to Upgrade Firmware on M Series Devices
Fiber PoE Accessory
UniFi Security Gateway
UniFi Cloud Key
EdgePower 24V
NanoStation M
PoE Adapters
UniFi Switch PoE 24/48
EdgeRouter X
---------------------------------------------
#hadinetwrok.com

[@superlink5916]

sir abhi tak youtube par itna acha load balancing ko kesi nay explained nahen keya amazing

[@zubairsiddiqui1926]

bohat khub sir g apne mera kam bohat asan kar diya ALLAH PAK jaza de ameen apko thanks again & again

[@aminkhan-ak4602]

bundle of thanks hadi network aap ki ki hui configuration alhamdulilah bilkul perfect chal rahi hai

[@waqaralibaloch8907]

zabardast good work ustad

[@IslamicCandle95]

Sir g 1 chota sa kam or b kr den wo samj len k ham jesy users k leay best rahy ga isi setting ka 1 backup bna den or link yahan rakh den ham backup utha k lga len gy wo or b easy ho jay ga ham jesy users k leay thankss waiting for reply

[@MSR-ro8vx]

Greetings The importance of your explanation is very good, we explain in very easy, that is, even those who are new users can understand this.

[@javedakhter82]

Bohat hi aala.. maine 2 WAN easily configure kr lye hain .. or speed combine ho gai hai..

[@aaqibshahzad1677]

Bhai browseing speed b increse hoti ha or downloading b?

[@javedakhter82]

@@aaqibshahzad1677 ​ Bhai 2no batao ka ik hi matlab hai.. browsing b tu downloading hi Hoti hai

[@aaqibshahzad1677]

Bhai kitna kuch fraq prta ha phr main yeh purchase kron?

[@javedakhter82]

@@aaqibshahzad1677 ​ 2+2 =4 ho jata hia.. G jo krna chahte hain wo ho jata hia. Acha routerboard hai Mikrotik ..mai use kr raha hu

[@aaqibshahzad1677]

Bhot awla thank you bhai for yur time and valued reply jazk Allah

[@rashidmehmood7554]

Sir thnk u so much apne bahot hi clearly achy tareeqy se samjaya hi

[@affinityarts1]

Thank you for this amazing video.

[@imraankhan9785]

very nice its really working

[@FJBOSS]

I was asking different to help me load balance but no one was helping. You are brilliant teacher. Loved Ur way of explaining quickly. One thing I didn't understand is why didn't u turn DHCP server on mikrotik and also why we can't bridge lan ports in this setting.

[@aseerabbas1827]

good bilkul ap 1 achay teacher ho

[@-Tech-hm5sp]

Bht khooB.. Love From Karachi...!

[@ashishmahato6443]

Thank you for this video sir... Sir mujhe 1 static ip aur 2 wan ko load balancing karna hai... Iske liye ek video bana dijiye...

[@ClipTubepk]

sir you r so awesome i love u ALLAH APko Khush rakhy ameen

[@mudassardhama228]

Mashallah ❤sir jii

[@l.n.sharma7257]

NICE WAY OF TEACHING. ....DIL SE

[@mandeepgrewal3685]

top video in my life

[@MuhammadAhmad-zr2ju]

GOOD JOB BROTHER

[@moonpak007]

JazakAllah Khair

[@mohsindogar6081]

Good effort Rao shb

[@iqrakhan1017]

bht khob thank you sir please mangle main whatsapp youtube and tiktok rule kesy add kerty haun wo b bta dy.

[@hilalkashanibaloch5013]

ur Great Sir ..

[@ikrammalik89]

Bhai jaan 2no routerbord ko kesay connect karna hai or baqi 4 lan ko kesay birdg banana hai is ki b video bana dain

[@securesolution5739]

Dear ap nay ya sab kuch sahe btaya par last may ap nay DHCP on kar na nahe bataya jis ki wajha say ya switch kam nahe karay ga balancing nahe ho rahe hay wo on kar na zaroore hay or wahe main chez ap nay nahe bataaii ap k batanay k mutabik may nay pora ka pora setup kar lia or clint ke bhej wa dia or last may yahe ho k wo nahe chala .. pata chala k hum nay DHCP active nahe kea is may sara kam kharab ho gaya kea faida ho ya sab kar k

[@ehsanali90]

excellent info

[@fakharshah5944]

Proud of you... kindly vocher kysy generat krty ha mikrotik sy??

[@irfansandhu9772]

Very informative vedio

[@carspoler1368]

sir bohat shukrya ap ny bohat acha explain kya

[@HadiNetwork]

Thanks

[@carspoler1368]

@@HadiNetwork sir koi media server ki video banay jo user ki wan port say bhi unlimited data download keray or agher apka mobile number mil jay to bohat acha ho gha

[@RazaAli-xf1zt]

great fully explained

[@mudasarg1210]

Aslam o alikum kia hal ha bhai jan ap ki video both achi hoti ha both acha se smjhte ha bhai jan agr hm isp ha aur hm har user ko alg se ip dena ha to kase den datel se bata de plz

[@ZeuSsTheKiller_1]

bhae total setup smjhaney k bad ya bhe bta datay k iski router main run kaisay krwana hy.... mera pora ghnta zaya krwa diya

[@foodfusionstudio2055]

Excellent job 👍

[@Riazsaraikivlogs]

ہادی بھائی سلام علیکم آج بھی میرے پاس دس ایم بی کے پانچ کنکشن ان کو کیسے ایک ساتھ آؤٹ کریں

[@azamanmol4677]

mashaallah good sar

[@bestonemsnetwork4927]

THANX sir bohat achy

[@gbmirzapoint]

rao sahab iss ka aik asan sa hall bhi mery khyal main hy ko bjay aik router board or khredny ky TPLINK ka TL 480 ya koi or load balancer khreed liya jay us main 4 ports optinal hoti ahin lan ya wan bnany k liye or wo router board sy sasta bi perta hy kya khyal hy?

[@shempoobulit4925]

sir . 1 hi mikrotik main 2 wan chalani hain . ap is video main keh rahain hain ke hotspot pe nai chaly video ki duraition 23;55 pe .. ..plz btain jesy 1 wan 1 lan pe chalaty hain wesy hi chaly ga ya 2 mikrotik lgane parain gain ? bundel of thenks ...

[@smfarhan2754]

Thanks Sir

[@arieslogistics2118]

kindly isi setting main 2 ya 4 access points add krna bata din JAZZAKALLAH or agr 1 ISP off ho jay to kia doosra 1 ya 2 auto chalta rahay ga ya bnd ho jay ga ?

[@mdulfat6593]

Thanks 👍

[@rakesh-vf6yc]

Excellent bro TQ 🙏🙏

[@jaansolangi7293]

Nice video. Mikrotik aur 4g evo wingle dono loadbalnce me chal sakty hai kia plz iss p ek video banaye

[@HadiNetwork]

4g evo same WAN he tu hy.

[@Malik-IT]

bhai jan ap ki videos nahen a rahai aik question tha ap sy mikrotik sy relative hia?

[@hitecnetworks]

aoa bhai apki videos bht achi h inko dekh k bht se msle hal hojate but jo ye loadbalancing ka method btaya h apne isse voice and video calls ka bht issue arha h kindly uspe guide kr dain k wo bar bar disconnect ku hoti h or uska kia hal h

[@farazsaleem7629]

Aslam o Alaikum Sir, Sir you really made me subscribed. it really worked for me. Many thanks!

[@infolaw2586]

sir agar mere pass static ip address hai to ushka dst. address kaise define karenge

[@howtoinformation2415]

Kia hum ptcl k 2 device se line la k mikro tik Mai add kr k speet mbs bra skta hai btai plzz

[@kaiyan1981]

Asalaam O Alikum sir meray pass 2 mikrotik "Cloud Core Routers" install hain. 1. CCR1036-12G-4S 2. CCR1036-8G-2S+ mujhe bus itni information chahiye k kya is tutorial say main load balancing ker sakta hon yan nahin? meray pass 2 lines in hain CCR1036-12G-4S mein. aik telenor aur 1 ptcl.

[@AirlinksPakistan]

kia bat hai

[@MrRakeshjoshi005]

Very thanks to you sir

[@sumitabiswas5099]

Nice

[@texitechkarachiit68]

maine is method ko follow kertay hoe load balancing configure ker lia hai but issue ab ye arha hai k banking websites our government website load honay main problem ker rahi hai. Iska kia soloution hai Sir ?

[@jibachhsah8604]

hello sir as per your video i had done its working fine but one problem how to access lan device it is pinging internally via new terminal but not from outside network so please help

[@zeeshansalmani27]

Sir mere mikrotik me hotspot service lagi hue h or brige bhi bani hue h 1 LAN jo router laga hua h usme user passwords mangta h or LAN 2 me router lagata hu dosra to usme jo bhi connect ho raha h direct ho raha h login page nahi aa raha h aisa q

[@Martin-ot7xj]

Hi there, please make a tutorial video about which dengrous ports list by default we must to block on microtik firewall for more security . Thnx

[@MuhammadZahid-rt1tb]

Kindly ye b bataya karain k rule ka mtlb kya hai kesy work kar rha hai

[@literacydepartment6216]

Good work

[@dogearitinfo6495]

Hilleo sir . Sir jab load balancing ham kar tahi to hamari pc ko internet nahi arahahi . Qu nahi arahahi sir .

[@muhammadlatif1389]

Thank You for this brief configs

[@syednasirjamalshah396]

nice

[@TerichMirvillgevlogs]

Slm sir Kia is divice se be or koi behter divice available hai k nhi Jo ke 4 se ziyada line through Kar sake

[@baloshi420]

Bhai es loadbalocing main 3 Lan hai jo bridge hai. Ek lan ko limit karna hoo to kesy karty Bridge ho jata par mujy ek lan ko limit karna es ka koi suloution hai.

[@Srony25]

1 pppoe connection and 1 ip connection pe Load Balance kese kare??

[@fahad.muslimtv]

ye load balancing ya failover sirf us wqt kam kartah ay jab ap ka WAN (1 or 2) down ho, means WAN wala router off ho, ager WAN router on hyn or internet pechay say nh arha tab ye kam nh karta. koi aesa solution bataen k router off kiya bagher 2nd WAN say net chal jaye

[@taxxab69]

Hadi Bhai 1 issue arha hai when balancing from diff ISPs, net slow ho jata hai, kbi ajta hai, i think DNS ka issue arha hai, iska kya hal hai?

[@shakar2205]

Good

[@sardarsheroz8483]

Main server connect disconnect hota hay Kay issue hona chaiya tamam user fiber to home hay

[@ahmedbaloch7960]

Bhai aghr ma 2 network chalo to kasa setting karo ap mery online kara gay plzzzzz

[@hadibiba3753]

Yeh failover bhi kry ga ???

[@meerab1272]

Excellent

[@superlink5916]

sir please agar ho sakay to unifi ap with mikrotik hotspot ki video b bna do please

[@syedhasanabbas]

If I have a wifi router should I connect that Wifi device to Port 3 or connect Port 3 to Switch and then Wifi into any switch port

[@usamabinazad8204]

Sir mane is method ko apply kia ha, speed merge hoti ha. Lakin dono ma se koi aik ISP (WAN) agr down ho jaey to mery server ki kuch applications kaam nhi krti. Please help.

[@-Tech-hm5sp]

Sir yeh to Failover ban gaya jab aik wan band karo to second use horahi hay... mene har jaga jahan apnay lan use kiya hay mene bridge wuth kiya hay

[@najeebullah2896]

sir what will do if we have two wan and two lan please reply quickly

[@user-sg8lg6my4z]

Sir yehe setting paid mn krwani hai kitny mn kr dain gy

[@everinfourdutv1495]

Agar 2 wan hon tu port forwardin kesy karain gay?? Kindly bata dain

[@rakeshraaj1203]

thank yousir

[@alucard77719]

Hi Sir, you made me subscribed. please share to me the command lines that has been used here. Many thanks!

[@networkingschool8209]

helpful video

[@arfanali1000]

Sir Plex per koi video banain

[@Qureshi55us]

Good👍

[@waqarbhatti1465]

میں نے ایک نیٹ ورکر سے لینک لیا ہے ڈایرکٹ فایبر ہے موڈیم نہیں ہے۔ میں چاھتاہوں مایکروٹیک کو میں کسی بھی نیٹ ورک پے اوپن کر سکوں اپنے موبایل پے اس کا کوی ھل ہے تو بتا دیں۔۔۔۔

[@harshpandit5564]

Dear also it's work at failover?

[@muneebakbar1437]

Bhai what's the cheapest price of micro tick router ?

[@rahulgrover1972]

can we do load balancing in ipv6?? ipv6 me network id 64 bit ISP se aati hai...aur host id 64 BIT local generate hoti hai...kya aap ipv6 par aisa video bana sakte hai ???

[@arafatbawa5700]

Hi. thanks for your video. I have microtik RB4011iGS+RM. All the interfaces are in slave mode except ether 1. I need to have at least 2 more interfaces in master mode for load balancing. Can you help me please?

[@RehanHanif]

Dear Sir, I follow your step all thing working fine but system didn't get auto ip DHCP not working kindly guide

[@sunnybutt7571]

bhai mai my load balancing alehda router board py aur server alehda router board py configure kiya hwa hai plz iski setting bhi bta dy , mery client ki trf fbr ki website work nahi krti

[@puspendra657]

BGP m routing IN-OUT filters k through load balancing kaise hoga..using 2 ISP

[@hafizmuhammadmudassar4097]

sir me ek problem face kr rha hun using Mikortik Balaner me ne complete settings 100% krli hain but Dlink ke through kese out kru wifi

[@osamaahmed2357]

PTCL Routers k DHCP enable h rahe ga ya disable????? Dono WAN k?

[@muhammadfaizanamin4280]

Assalam o Alaikum, I have one DHCP WAN Connection and one PPPoe WAN connection can i combine them?? by this method.

[@ImranAli-is3yn]

A-o-A sir! sir ma ny ya sara process keya ha .. hotspot service toh chal gai but PPPOE servise is not working. kindly tell me how to pppoe work

[@ttrr6433]

sab se acha tplink load balance he

[@lovelyasifkhan1818]

Bhai muje ye batao kaha se mile ga ye mtlb apke pas ana padega

[@ranamuzammilhussain2651]

Dear Hadi Bhai Plz Yeh Bataye K Ager Hamari Aik WAN Yani Aik Ptcl Ki Line Kharaab Ho Jati Ha To Packet Lose Na Ho Packet Lose Hony Sy Hamara Network Salow Ho Jata Ha Matleb K Auto Ho Gi LoadBalancing Jo Aik Line Kharaab Ho Ny Sy Khud Cover Karay ?

[@HadiNetwork]

Yes auto ho jati hy.

[@saifullahteachingnews5644]

🎉

[@abdulazizchandio2335]

Sir me PTCL se 50 Mbps le rha hn our aage mene TP-link Routers pe distribute kia hua he users ke pass me chahta le darmiyan me mikrotik rb750r2 lga ke sb routers ko apni marzi ki speed de sako kia aesa ho jae ga????

[@entertainment11625]

Apko 50mb kitny m par Rahi hae