How to Configuration 2 WAN and 2 LAN separate, same MikroTik router

[@njsarn]

Thank you for printing the steps very clearly. This is way better than just clicking the buttons and enter the data. Next time it would be nice to add comments the whys you are doing each step in addition to what you are doing... Such as "we want to route LAN1 to WAN1... so we need to create a routing rule...and we do this by....pointing the input to the output... and the action is......" Then, we need to create a Firewall rule for each port.... and we do this by..... Essentially give reason why we do things and the result or outcome is that... etc. etc. etc. thanks again.

[@qkw6973]

Thanks for your tutorial! I've searched quite long for separately configuring 2 WAN and 2 LAN on RouterOS.

[@BishishtBhatta]

Thank you this method works. Verified in production environment. Lots of love from Himalayas.

[@fabiojrsantos94]

This is so amazing, i has search for this in another places, but never see like this. thanks for this vídeo and the help.

[@claudioluizvechini4979]

How to add FailOver, when WAN1 down LAN1 goes to WAN2, when WAN2 down LAN2 goes to WAN1, and when WANx goes back to the original LANx ?

[@4changer_826]

Thanks, bro. this video helps me to solve my problem.

[@mfarokh27]

Much appreciated 😊 Awesome work. Thanks a lot 😃

[@user-zu1kd7pr2w]

very informative video thanks a lot sir

[@koumetamegilles5206]

Excellent my bro!!

[@utusystems-ui6cp]

@HowToIT Thank you for the very informative and educative video. In configuring static routes. I still don't understand where you got the gateway ip address from.

[@asstmanagernetwork4276]

Congratulations...Very useful video...How to provide to access LAN1 systems to LAN2 systems

[@iamyulianto2]

Thank you so much! This is very helpful

[@analogatman]

Hi, thanks for this excellent video, in this step i have a question... min 13:17 Configure Static Route, if mi connection is dhcp shutdown, the provider gimme other ip wan, need change manual for new ip ? ?

[@sentralbangkongpilipinas7830]

very clear tuts

[@adreaman]

nice! thanks a lot for you so good video!

[@officialak47buda63]

Excelent! Thank you my friend!

[@mimoshpisholack]

Perfect, Thanks

[@HDEVCoder]

what if I have same gateway of wan 1 and wan 2

[@danfersolution8852]

Excelente la configuración. Muchas Gracias.

[@officialak47buda63]

how can I make them communicate, for example a pc in lan 1 send a ping packet to a pc in lan 2 all through mikrotik, I'm trying but all packets get dropped

[@mysqldb2697]

Is there any possibility to interconnect both LANs?

[@davidhanemann135]

Te amo! Sos un groso.

[@franrayo1257]

Good! thank a lot!

[@yousefghahramanzadegan2281]

Hi, With the current configuration how we can make LAN1 access (ping) LAN2 and vice versa? I already tried many ways but no luck!

[@SaumyakantaSahoo]

Hi, is this possible with a WAN that has no static ip address (like LTE 4g) ?

[@lesathscorpii8494]

muchas gracias!!

[@joaquinvargas4151]

excelente tendras en español amigo.

[@Malik-IT]

Excellent! video how to hotspot same 2 interface wan1 and wan2

[@loengleangeng]

Greate!

[@ewertonnunes4563]

Obrigadooooo!!!

[@aungkooo8901]

can not ping between 2 sperate lan , which configuration need to add ,sir

[@pauljohnmagtoto6718]

Is it possible to ping each other? If yes, how

[@joangonzalez7283]

hey men i see your vidio but i have one problem when i connect the 2 wan by dhcp-cliente and i try to do ping the mirkrotik dos not have connection always says network unrecheable

[@leangengaleadsit7299]

Hello, if I use VPN on both WANs available or not?

[@lev_anni]

Why is there allow ping gateway rule needed?

[@Setup_ve]

Hello, for wlan its possible?

[@kikinperez5944]

Muchas gracias, me sirvio de mucho, pero en caso de que algunos de mis servicio de internet (WAN) llegara a fallar, como puedo hacer para que en automatico mis dos LAN salgan por el servicio WAN activo?

[@ziggytcm5116]

Q tal Kikin, investiga sobre WAN Failover

[@khamxay_xiong]

plz make a video how to set a interface card in GNS3 THANKS

[@lakshmipathis3905]

Hi I need your help configuring my router

[@ederosvaldomunguiahernande3355]

Muy bien pero no veo que hayas utilizado same hiciste un masquerade.

[@remueldarapiza1901]

can i add another lan?

[@konstantinboytsov3037]

Hello can you update instructions for Routet OS 7. Please men. On step on mangle I can’t create new mark routing on Action

[@marioc080]

Debes ir a Routing\Tables para crearlas primero y luego usarlas.

[@bucz]

you need to add Routing\Tables 0 D name="main" fib 1 name="Lan1 to Wan1" fib 2 name="Lan2 to Wan2" fib

[@alejandrobulovacich741]

How can put a static ip address in WAN 2??? my conection is static, not dinamic...

[@grahamtaylorburge2206]

I don’t understand the static route step please clarify

[@eljefe62]

WTF is this not focused!