MikroTik product news: CCR2116-12G-4S+

This is the most powerful CCR so far - perfect for massive BGP and routing tables with performance up to 6x faster than our previous top-of-the-line products!

Finally a 4 SFP + with powerfull CPU. BB 1036, you done it well.

[@LeoMikrotik]

Fantastic hostess has total sympathy.

[@juhomattson4418]

We have a new champion! Can’t wait to meet CCR2116 in person. And Eva is a natural, such a lovely voice and smile. I hope she gets to tell us about the next beasts MT has in store. Brilliant 👏🏻

[@alexrm3862]

Who was that sexy BGP man....... Just needed a cowboy hat and marlborough cigarettes to complete the picture!

[@taavim7340]

12 gigabit ports is ridiculous on this device. Hopefully there will be proper version with 25G and 10G ports

[@bucharestcartraffic]

hahaha TRUE !

[@galactictomato1434]

If you want a switch, buy a switch...

[@taavim7340]

@@galactictomato1434 And how does that help with the fact that this device has useless gigabit ports? You don't need ccr2116 to handle that kind of speeds.

[@Namkro-ASMR]

Why don't give some SFP28 to this little monster?

[@enversaranayev4234]

What about IPsec HW offload throughput tests comparison?

[@ashishpoyekar]

On CCR2116 Router how many pppoe users and how much bandwidth i an run with max cpu usage ?

[@空白-y6i]

please answer :) how many pppoe user can handle with this router???

[@KreativeParvez]

2000+ users, depending on bandwidth

[@ktl2001]

Why the heck you still release 1g and not 2.5 or 5gig port for 2021? Making all those 16 cores and 16G RAM wasted.

[@1993_iraq]

Who will be better if we compare mikrotik 1036-8g-2s+em with mikrotik 2116

[@mikrotik]

2116

[@Andrew_Thrift]

No hot-swap power supplies 😭

[@djdrastic1]

Nice to see you still around in the Mtk community.

[@Andrew_Thrift]

@@djdrastic1 thanks. I'm still quite active on the official Forum and LittleBrothersWISP slack.

[@newlic12322]

You may make it happen by DIY ^___^!!

[@djgloom]

MikroTik can we see some long-range 5 and\or 6 ghz wireless pretty please? We need 30-40 km bridges all-in-one without other vendor antennas etc. And it's time for nv3 and nstreme3 or something. We need some new proprietary breakthrough. You're losing wireless every year.

[@oliver1121]

I personally had massive stability issues with the RouterOS v6 Mikrotik CCR2004-1G-12S+2XS's running x2 Full BGP Tables and OSPF for the loopbacks, so much so that I ripped them out of my network and put in CCR1036's instead. As soon as I put in the CC1036's my issues went away. I came to the conclusion that the ARM chips and RouterOS v6 just don't work well together. This new Mikrotik CCR2116 Router does look good, but my main concern is that it will basically only be stable on RouterOS v7? That said this Router does look pretty good :)

[@mikrotik]

Yes, it’s made for v7

[@genpsi]

@@mikrotik finally , but please give 36 cores instead 16 .

[@djgloom]

@@genpsi For what? Have you checked the working frequency?

[@sidewinder7602]

@@genpsi It's about single core performance. The new ARM64 based CPUs run at a higher frequency. You don't need more cores ...

[@zakariafarah1101]

@@mikrotik If this router is made for v7 why on your website under specifications for this router shows "RouterOS license 6"?

[@cizekmilan]

Nice. But where is 802.11ax for WiFi products?

[@ellunessinfalta9095]

We need 100g SFP

[@zyxwvutsrqponmlkh]

So if it took 3 minutes to load, why did you put 30 minutes on the clock?

[@mikrotik]

Mistake in the video, true

[@Johann75]

Eva, what is the difference between TILE and ARM MikroTik architectures? Also, what is the stability of the architectures? Why are all other CCR decides on TILE architecture and this not?

[@mikrotik]

Like you already mentioned, TILE is an older architecture and MikroTik is slowly transitioning to the newer ARM. Most of the new devices are ARM. They are both stable and powerful, but ARM CPUs are more popular and affordable right now

[@Johann75]

@@mikrotik thank you, but you ARM products are mostly out of sales

[@mikrotik]

TILE based CCR devices are also very fast. If you can find those instead, no problem to use those.

[@manuelrios2535]

Still single core for BGP convergence? Gigabit connections? No one use Gigabit connections today in datacenters for BGP , I hope 8 or 16 SPF+ or 8SFP+ and 2 QSFP28...

[@paulmaydaynight9925]

1gigabit/s ports are just so 1999 make them all 2.5 5.0 Gbit/s capable -for home lab etc- then we can talk

[@adeebshebani3814]

Which has more horsepower and which the best in routing and packet handling, the CCR 2116 or the CCR 1036 ?

[@mikrotik]

like the video says, CCR2116 is faster

[@StijnGijsen]

If the CCR2004 came before the CCR2116, doesn't that make it its older brother? Disregarding that, this might be just the thing I was looking for for my new house. Completely overkill for my use case, just the way I like it.

[@jefftee448]

For your house....lol. Overkill is an understatement

[@therealrockguy100]

Lol. Perfect for home routing. Not underutilizing this router at all. 👍

[@thorstenfricke3257]

may i install an ip telephone management on it?

[@guangjingpeng5498]

Do I want an export router with a capacity of 2000+terminals

[@raeeed444]

Why ccr2116-12g-4s+ only has 128MB storage? Is that enough? If compare with the CCR1036 which has storage 1GB. Is that because the architecture is different? (ARM vs Tile)

[@mikrotik]

A professional router like this is meant for routing only. You should not store anything on it

[@raeeed444]

@@mikrotik once question again, in ccr2116-12g-4s+ have a one slot M.2, it's that for addtitional Storage / RAM ?

[@kumersajib234]

New Boss is finally enter the war with his powerful weapon

[@TheLexaKI]

How about FIX RANDOM REBOOTS ON CCR2004??? Or MT can give me money back for this trash? 2 years without respond and any solutions. Good job MT :/

[@sidewinder7602]

You must still be running ROSv6. Don't be afraid to give ROSv7 a go. Yes, quite a few features still missing, but overall it's working alright.

[@texnomar]

where are buy at the best price?

[@BudiSetiawan-id9en]

Could u give more heat sink for the sfp port please?

[@WissamQuemel]

Very interesting, waiting for full specs!

[@danielfavero6098]

Waiting for v7...

[@shadowrob7709]

@@danielfavero6098 Meme for years ^^

[@sikhsardartv144]

Hi i am using this machine but i got a problem . Bandwidth get down at 0 mbps in sfp 1 and ethernet port from 1 to 3 all ports flicked to 0 mbps for 1 second. Could you help me to resolve this problem??

[@mikrotik]

email support, we can't help in youtube comments, there is not enough space for discussion

[@iftelf]

From product list: "Like its younger brother - the amazing CCR2004" So is it also freezing and rebooting randomly as CCR2004 do ? I and many others have open tickets for months and Mikrotik is unable to fix it or at least mitigate.

[@BudiSetiawan-id9en]

yes they must take this problem seriously, i also has the same problem, random rebooting

[@carlosescobar5995]

@@BudiSetiawan-id9en you're running Router OS v7 or v6?

[@BudiSetiawan-id9en]

@@carlosescobar5995 i ve rebooting experience most in v6

[@carlosescobar5995]

@@BudiSetiawan-id9en oh ok, only hope is v7 is getting fast development lately.. Mikrotik is pushing to stabilize it, then make it feature complete

[@sidewinder7602]

These boxes are meant to run ROSv7. Development is quite fast, we've got a significant number of CCR2004 in production, as BNG or BGP speakers, aside from some software bugs, they run fine.

[@KonstantinovAG]

@Mikrotik - with switch chip can l3 offload???

[@djsmiley01]

Both products and presenters are getting hotter :)

[@umiseaz]

how about ccr1072

[@eferkano]

Same question here

[@OnajTamo]

Same question here

[@k4qdex]

what about flash size?

[@MarC0PL]

11.01.2022 and still not available from suppliers.

[@lukasmoravec2489]

Amazing new device. I'm looking forward to integrating it into my network

[@tomasb9483]

That's all good and all, but still waiting for native winbox for mac os :(

[@denisaputro4152]

it has 2 power plug. is it must connect 1 or 2 at once?

[@mikrotik]

You can use one, or use two at the same time. If you use two, it will keep working if one is disconnected - failover

[@denisaputro4152]

@@mikrotik thank you

[@saifdprecio]

there is no guide about setting up bgp on os 7. I upgraded my mikrotik to 7.1.1 but there is no one to help me with the configuration. Because they don't know much about bgp configuration on os 7. Now I needed to buy another mikrotik. but the earlier one is now a waste.

[@mikrotik]

BGP is not for the beginner, I suggest attending a training or buying a book about BGP first

[@alexbasheer6115]

can this router handle 30,000 dhcp without a hussle

[@Jabed27]

Which the best between Ccr1036 9r ccr 2116 for isp

[@mikrotik]

CCR2116

[@BattousaiHBr]

the tests at 3:10 seem misleading... that specific model that was tested against has no SFP+ ports, and the total forwarding capacity you could get out of that is 16 Gbps... which is exactly what the test achieved, suggesting the interfaces are the bottleneck and not the CPU. i'd expect if this was tested against one of the other CCR1036 models that do have SFP+ ports the throughput would be significantly higher and these comparison numbers wouldn't look nearly that impressive.

[@diegomax]

True.

[@boostwp]

I just wanna know, are regular unexplainable and unexpected reboots still included or a separate add-on license?

[@kalpakmukhopadhyay6461]

cool cameo by Normis

[@pankajmazumder2860]

When will you release router os v7 stable version ?

[@mikrotik]

It is stable

[@pankajmazumder2860]

@@mikrotik I mean long term version

[@newerbits]

100gb ports?

[@254HISTORY]

i have this router but my redirecting page for hotspot is not working any one who can help kindly

[@ravenvg]

Can you add performance Tab on the webpage please?

[@DeviloftheHelll]

well, when will be avaiable?

[@mikrotik]

Contact your local MikroTik distributor about price and availability

[@francescoleone4941]

does it works with map-e isp?

[@mikrotik]

It works with any ISP

[@TechnoKing108]

10GE customer facing ports please

[@mikrotik]

You are on the wrong video: MikroTik product news: CCR2216-1G-12XS-2XQ kzbin.info/www/bejne/bZDYfauQjr54prM

[@damagi7630]

Why not only SFP+ Ports if it is for BGP Routing? Like 1072? Why do i need 12 1G RJ Ports on such a device? Total nonsense

[@michaz3573]

IPsec?

[@shtumpa1]

I only tunedin for EVA

[@mariyahsumayya5562]

I really hope the issues of the 2xxx range is sorted. We used a CCR 2004 once, it was a nightmare. Packet loss on links happens as soon as BGP goes up. Swopped it out with a CCR 1036 and no issues.

[@ivosarak959]

If the HW is capable then the worst part is SW side of things here.

[@aeronacabaofficial]

NO! CPU5 and 0 are always @ 100% , our network crashes

[@hassanmazumder3604]

how many pppoe user can handle with this router???

[@KreativeParvez]

2000+ users, depending on bandwidth

[@hariranormal5584]

oh dear this will be perfect combo with FMT2 colo

[@randomxspots]

So Excited to test this one.

[@lamongannetwork4859]

siap menggantikan 1072 untuk bgp

[@jallesvides]

Nice hardware

[@Andrew_Thrift]

Looks awesome !

[@zakoyantigran]

Still no info on the site

[@mikrotik]

This is because this is a hidden video only for distributors

[@pavelnagopetyan1504]

@@mikrotik Whats is about prices ? how match ? :) (web site price will be good)

[@MikeHammett]

@@mikrotik not for long!

[@zakoyantigran]

@@mikrotik I see, thank you.

[@RodzherBerastegi]

No entendí nada de lo que dijo pero, que hermosa mujer. 😍

[@ronschneider4336]

Hay mejores

[@RodzherBerastegi]

@@ronschneider4336 Nadie dice que no. Pero eso no le quita que sea linda.

[@gsi87]

скучаю по экранчикам на передней панели(((

[@sampete8062]

Еще один зверь.

[@Bendrtron3000]

Redundant PSU is something really good ,but how about make it hot swappable modules ?

[@Gomo_DD]

If they're advertising it for the enterprise environment, which they are, they shouldn't even be mentioning redundant PSUs .. it's a must have from early 2000's.

[@adeebshebani3814]

Which the best in dealing with packet connections ccr1036 or ccr2116 ?

[@mikrotik]

Ccr2000 series is the future

[@rsmedia6425]

I love ❤

[@victorekegbe7407]

Please, can Metal 52 AC do a point to multi-point connection with a 24dbi flat panel antenna?

[@mikrotik]

Yes, but why ask in such a random place? Ask in the forum

[@totem168]

Dang! The raw power is crazy 😃

[@mr_g2671]

You need minimum 5 x sfp+ ports. Preferable more. Or even 25Gbps ports. Normal sfp ports is a waist of space. If you realy want to play with the Big isp's then please up your game.

[@carlosescobar5995]

But this one has 4 SFP+

[@sidewinder7602]

While SFP ports have no waistline, you've got to understand that these are _software_ routers... Yes, BGP benefits from the massive increase in single core performance combined with ROSv7, but MikroTik will never play with the big boys without integrating ASICs/FPGAs. Since the costs involved would be passed on to the end consumer, it simply won't happen. Especially not on the scale that would be required to come even close to what enterprise vendors like Juniper deliver. It's just unrealistic.

[@SyaifulMaulanaAbbidin]

Mikrotik so popular in my country Indonesia.. suitable for UMKM small business with competitive price

[@dbyo69]

No, tplink is more popular 😆 Huwawei Fiberhome Gandengannya kuat 🤣

[@ariosinggihpermana]

Cool

[@aarondeus186]

Can downgrade to ros 6?

[@mikrotik]

v6 is not supported. new hardware = new drivers

[@aarondeus186]

@@mikrotik tq for info

[@supra107]

CCR2116, very catchy name.

[@joelmolina2079]

Traslation plz

[@MikeHammett]

Rooting? Did Tom Smyth write the script?

[@Leftplayer1]

Nah, if he wrote it, the video would have been shot in a pub...

[@habibkanso]

Its pronounced like that in British accent.

[@MikeHammett]

@@habibkanso well right.

[@mikrotik]

I wonder what Tom is up to these days :)

[@jefftee448]

@@habibkanso She has mostly an American accent but there's small hints of other ones (Latvian?) in there as well. Or maybe she's a Latvian who grew up in the States.

[@BOTLT1]

I correctly understood that the frames are soldered to the motherboard, that is, replacements can be changed or there is no way for an upgrade 🙄🙄🙄🙄🙄🙄

[@mikrotik]

frames?

[@BOTLT1]

@@mikrotik No, no, everything is fine, I meant that the specification of your new router will be sad if it is impossible to replace or upgrade ram It will be sad to do

[@sidewinder7602]

@@BOTLT1 16G isn't enough for your purposes?

[@BOTLT1]

@@sidewinder7602 what's the difference What 16 GB Ram is used for, the essence is that there is no possibility to upgrade for the future, that is, it makes sense

[@fatkhurrahman3653]

wah wah

[@tedseu]

I hope CCR2116-12G-4S+ has an ability to support BGP load balancing from multiple NAP

[@carlosyoong5784]

"If you have large ISP" you will need BGP with RPKI support without waiting for several years to get RouterOS V7 LTS, does this new device has it? This device might be used as border router, definitely more than 4 SFP+ are needed if you think about redundant wan(s) & lan.

[@amateurwizard]

Take my money!

[@michaelnuyana2865]

Problem in cpu, one cpu almost 90%

[@meinsda5983]

Hwho is the nice girl?

[@mikrotik]

Like she said, Eva from MikroTik logistics

[@meinsda5983]

@@mikrotik we want see more videos with her ;)

[@alemst84]

She moved her head alot. Made the back of the neck hurt.

[@jonathancastillo2430]

Pero esta agotada

[@vlasker]

Отличная новость, товарищи !

[@krausshusha2694]

1:58 I think you mean the older brother.

[@BOTLT1]

Everything was going fine until the moment they said about the processor and ram, for some reason I was already saddened 😬😬😬😬😬😬😬😬😬😬

[@sidewinder7602]

Why?

[@rssimran4800]

Bring sfp version

[@bucharestcartraffic]

i hope you did not use those shitty noisy fans...

[@meganetteconecta4335]

Buy Huawei NE8000 and your problems will end, mikrotik is no longer suitable for large-scale ISPs

[@genpsi]

Are u joking ?? Huawei ? Support dictator's company of China ? ahhahaha , u such stupid bot

[@ilirnako1]

4SFP+ are super ,but the best configuration should be 6-SFP and 6 rj45

[@romanevtuhov8305]

красотка! я б с тобой тоже переспал!

[@dbyo69]

Hi Normis 😆

[@mikrotik]

The girl is Eva ;)

[@dbyo69]

@@mikrotik My mistakes 😁 Hi eva 🤩

[@powervac1]

Ева переигрывает, очень ненатурально