Turbo Diesel Tacoma // 4l80e Swap OM606

[@calebwilliams7691]

One hell of a truck! happy to see i made it into the video 🫡

[@Elisworkshop]

Thank you for helping film man!!

[@driller524]

Very nice! This is an awesome build.

[@xstalephotographx]

Love the build man. I was the one that talked to you at CC Auto a few days ago. I love seeing stuff like this instead of the typical boring builds. Keep it up!

[@masonnutter6718]

That truck is sick your channel is so underrated I love your content man keep it up

[@Elisworkshop]

@@masonnutter6718 thanks a ton man! I sure do appreciate that.

[@finlay230]

love your driveshaft mod set up, great work !!!!!

[@alexanderthorkristjansson3441]

fucking love your build man! dope asf!

[@MontanaWild78]

You need to do a LED projector retrofit into those headlights

[@RobinAlmqvist]

Amazing video, definitely worth the wait! loving the german diesel content!

[@kylescaggs]

Makes me want do something similar with my S10.

[@wrxly707]

THIS IS THE VIDEO IVE BEEN WAITING FOR! Hell yeah man!

[@Elisworkshop]

Thank you for the support!!

[@timothylikesbeerandbread]

something I've seen online when researching a transmission cooler for my 4runner is to place the temp sensor on the return line from the cooler so you know the temp of fluid entering the pump and valve body circuits.

[@AaronBroce]

Been waiting for more videos of this thing!

[@kristerskrasevskis1005]

This is sick!!! I have my Mb w202 with OM605 Superturbo. Would love to build OM606 one day

[@elaladwig]

Awesome video and amazing build Eli!!❤

[@TonytheCarEnthusiast]

Are you gonna install a jakes d3 transbrake ? It would probably improve quarter mile times by alot by using trans brake. How big of a difference did the high stall converter make? Have a om648 to 4l80e 4x4 but its going on my jeep xj and I need a torque converter. Sick build. 🔥

[@Elisworkshop]

I am not, I think it makes getting into reverse a bit odd or something like that. I would like to try it though! The big stall takes a lot of lag away letting the engine get up to 3k rpm quickly. Nice! You probably can run lower stall being direct injection with more torque.

[@Dirtydandiesel]

Thankyou so much for the upload! Been debating what trans to use for the longest time now “over a year”

[@TyDorn09]

Ima need a full build overview video!

[@ORIGINALCONCEPTGARAGE]

That's a good transmission never failed me yet. But I gave my daughter my diesel my red Chevrolet c1500 single cab 5 lug with a factory 6.5 Turbo Diesel but bought me a 1st gen cummins to start playing with now its paid off. Lol

[@lilSweeps]

very smart kid, how old are you mate, because your knowledge is very impressive, it's also amazing to see things actually going right when you know what you're doing lol

[@ORIGINALCONCEPTGARAGE]

I see this little truck all the time & I love i. The thing is freaking bad ass to see it in person. I guess im going to find something to put my cummins into to give you a good run lol

[@Elisworkshop]

Thanks man! Thats awesome, oh yeah I'm sure it rips!

[@HassanKfhoury]

Great work

[@MCsCreations]

Fantastic work, Eli! Nicely done! 😃 You know, I love electronics as well, but not in cars. The electrics they're making are too much automated and so on... A car like that is never going to be badass! Heck, even gyros in rc cars ruin it. 😬 Anyway, stay safe there with your family! 🖖😊

[@nicolasp7395]

dammm bro this is insame!! Upload more videos, that is a real sleeper omg, that corvette didn´t wait that hahahah. Over 500 whp? that setup

[@dmerchant2]

this is awesome man!

[@JaegerWrenching]

You got a ton of talent!! Very few people on the planet have such a highly intelligent well rounded set of skills! My one personal gripe is I wish that diesel was common rail injected, becauses you could light that turbo a little faster and have even more fun! Nonetheless well done sir that truck rips!! What size turbo does it have?

[@Elisworkshop]

Thank you! I appreciate that, they do have the om613 or 648 that are common rail. The turbo is a precision 62/66 .63ar

[@undurdalip]

Put a hurtin on that vette. Engine sounds so good 👌🏼

[@cathymcgrath8320]

Thanks for the video, enjoyed watching it. Whose inj pump did you use.

[@Carcrafter7165]

The Taco truck pulls like a freight train nice 👍🏻 I don’t know what tires you’re using but you need some stickier meats in the rear like either Nitto’s or Michelin’s or consider dot legal drag radials Mickey Thompson’s

[@jeepkid4242]

You should make it 4 wheel drive or all wheel drive for more traction you might be able to use 2ed or 3rd gen Escalade awd cuz the ones that where all wheel drive came with the 4l80e

[@Elisworkshop]

@@jeepkid4242 that would be killer! I'd love to.

[@jeepkid4242]

@ and I don’t believe the awd system is limited speed

[@Elisworkshop]

@ yeah for sure

[@jeepkid4242]

@@Elisworkshop it maybe difficult though because a Escalade is a little wider then a Tacoma I think

[@CursedCoff1n]

Love the build brotha best taco build by far what brakes and rotors are you running in front

[@Elisworkshop]

Thanks a ton man! Seriously appreciate that. They are brembo cts front calipers and Mitsubishi evo 9 rotors.

[@adventurousairman]

Love it Friend

[@Minty_85]

Wsg bro remember me we met on mx vs atv all out a few years ago

[@adrienpearson9901]

Did you need to get a custom drive shaft?

[@Thaggard_is300]

How well does it do locking it up in 2nd?

[@abdullahalsabi]

your engine is mechanical pump How did you contact the transmission ?

[@gruest101]

hey do you have any other 606s lying around?

[@Dimitri_mk]

Hey man I’m trying to do a swap also into a 2004 Tacoma but use the stock trans would that work for 300-400hp or do I need to get a different trans also if I can keep the stock trans where can I get a adapter plate?

[@matsworld9386]

Sweet ..

[@CoreyGolphenee]

what a Tacoma owner will go through to not have to listen to a 4.3

[@matsworld9386]

hey, when you mated the 4L80 to the engine, the torque converter is somewhat exposed to the elements without that lower bell housing .. did you fabricate your own or adapt the original? or just leave it exposed? thanks!

[@Elisworkshop]

Hey! I left I exposed, I have the factory cover but I don't drive it in the rain and it's stayed clean.

[@matsworld9386]

right on, thanks! does the factory cover actually work with the adapter plate to the OM606? or would it require a bunch of fabrication to get it to seal up?

[@Elisworkshop]

@@matsworld9386 I'm not sure... I'd say so, I'll try it here soon.

[@vee950]

The real question is what ECU did you use to control engine/trans and make that kinda power

[@moparjr89]

Manual valve body means no computer for trans

[@NandO-ZA]

Eli love your 606 content and your innovative ways I'm from South Africa 🇿🇦 no one here has heard of the 606 I'm busy with a build similar to yours but I'd love to steal some thoughts and info from you ppl in the UK not very helpful although most of my groceries come from them pls help me I'm in the dark here. How could I get in touch with you thx again

[@kazbekdzhanibekov9154]

great👍

[@editz3234]

Eli, are you running stock bottom end?

[@Elisworkshop]

Benzforce rods, Elisworkshop Inconel Prechamber inserts, everything else inside is stock.

[@editz3234]

@@Elisworkshop thanks for getting back with me!

[@amariodom4858]

wanna om606 swap my 94 c3500 next 👀

[@moparjr89]

Thats not smart 12 valve would be far better for something that size

[@rebelfromva]

What intake is that

[@Elisworkshop]

I made it out of a Chevy driveshaft

[@edisongraves293]

Yeeeeeeeeeeeeeeeeeeeeeeee

[@Elisworkshop]

YEEEEEEH

[@68cutty]

[@ORIGINALCONCEPTGARAGE]

Hey brother you want to get together and do it team up You're in Kentucky were fixing to have a huge show here in Stanford, Kentucky Which Is For Military Veterans As I Myself Am A Veteran. Were Having drag racing and stunt competition plus bikes cars to win best in show with thousands expected to come due to my vendors who are coming and the charity were bringing to Stanford being world known. Were becoming their 4th Chapter in its history so pretty huge. We may not be huge on KZbin yet but were definitely worth working with because we have excellent contacts and sponsors

[@Elisworkshop]

Yes sir!! That would be great, I'm in Stanford about everyday so that would work good for me. When will this take place?

[@ORIGINALCONCEPTGARAGE]

@Elisworkshop April 12-13 2024 at Veterans Park! Thanks Alot Brother As This Is Going To Be For Our County And Our Kentucky Veterans Population!

[@indigoskywalker]

sounds like a cummins/lorry engine lol

[@averykienbaum2904]

Bro, who TF are you??