Milwaukee Digital Torque Wrench Review & Tutorial

Welcome back guys today we are rating my Milwaukee digital torque wrench. I’ve had this tool since November 2023 and I have been able to use it on a lot of jobs. You guys have probably seen on my other social media platforms me using it. So after four months I am finally going to do a full review and tutorial of the product, and I am also going to be reviewing and showing the Milwaukee pack out SAE and metric socket set as well as an Amazon brand for hex alan sets for SAE and metric as well. Hope you guys enjoy the review. Please comment below what you guys would like to see me review next. I’ve been using the Milwaukee high press black iron kit so I will be reviewing that shortly as well as a few hilti products so stay tuned.
Digital torque wrench: amzn.to/3P7rNxP
Milwaukee SAE & Metric 3/8 packout socket set: amzn.to/49yDIgz
Hex Long Allen Key 3/8 impact set: amzn.to/3P1Q7RR

[@lextheelectrician]

Newton Meters* not nanometers sorry guys I miss spoke

[@linehandibew6205]

She definitely knows exactly what she’s doing and I’m here for it.

[@two0sixEL]

Me too. But your Hella funny!! 😂🤣😭

[@sjfk1306]

She doesn’t seem to…

[@RichieD_21]

​@sjfk1306 don't be so naive

[@Sleepingcoffee979]

Incel ​@@RichieD_21

[@don-dspid2404]

Your timing on this review can't be better. We are about to invest in a power torque wrench for work. Now I can show everyone your review. Saves me doing the research on this one. Thanks.

[@Methxdz]

Perfect timing! I need this tool

[@dustinschupbach2709]

Hell yea!! That’s awesome!

[@disneylandmeetscoachella5237]

love your content!!!

[@SaltyTubers]

Nice to see a hands-on review of this tool! I do mostly automotive work with my torque wrenches and that beast is far too big for the tight spots, but I totally see where using it on lugs in panels would be ideal! BTW Nm is Newton-meters.

[@509brown]

Nice, changed my mind and I'll be getting the Milwaukee!

[@keenlyside283]

OMG that torque wrench is huge! Great content Lexi

[@lawrencemerrick3063]

Cool. Great explanation 🎉❤. You go girl

[@kennycolonsamol]

Amazing content like always!!! 🇵🇷🇵🇷🇵🇷

[@Hmdude8157]

Such a cool tool ❤

[@A.R.B.J.]

That was very informative.

[@tonymuthafuckingunn]

I've been waiting for this to come out. Especially in 3/8ths.... that wobble de wobble.

[@keithbennett5519]

Amazing video thx for doing the review Lexi

[@zekenzy6486]

Great Video. Thank you for sharing

[@JohnDarwin7]

Good review enjoyed it thank you.🌹

[@bufffatty9160]

never had a digital torque wrench, was told early in my apprenticeship that digital wasnt reliable and since then ive torqued all my gears and meter stacks with a mechanical spring one. Ive thought about upgrading to this exact tool. thanks for the video

[@mycatsballs8195]

I have the “analog” I want the digital It never hurts to have a backup and know how to use it

[@zidelectricalmentor]

Amazing and beautiful product ...nice sharing ... stay happy forever

[@dennishunsdon8343]

Great video! Milwuakee also has a new impact that connects to an app on your phone that lets you set your maximum torque and stops itself when you've reached it. Even has early trigger release detection and records the output data so you can go back and confirm every trigger pull was to the right specs. You can even set the LED on it to light up with a certain color to let you know when you've hit your target torque rating. It's 3062-20 M18 FUEL ½" Controlled Mid-Torque Impact Wrench w/ TORQUE-SENSE if you're interested in looking it up.

[@yhird]

Lexi. Thank you for the great review. Cheers.

[@ernieT29220]

Great review thanks

[@facistbuster]

You are smart and crafty. 👍💙

[@russrockino-rr0864]

Newton-meters. Great Review. Thanks for sharing!

[@timpedraza2085]

Great Job Lexi!

[@bwillan]

Nm is Newton-meters for the metric unit of torque. The ability to save the results of each item you torque is a great feature. As you said it shows proof that you did torque to spec if there is every a problem down the road.

[@nickmartino2839]

Awesome lex

[@chelolelo]

I wondered what these were for and how they were used while looking at some new toolsets. Thanks for the explainer

[@user-cw8rw8ug3k]

Nice!

[@ericvonwiegen5672]

Nice ❤

[@sadekjs]

phenomenal review & demo Lex such deadly tools & accessories always bringing the fire content 🔥🔥

[@skkeldon8769]

My knowledge has increased and my eyes can see more clearer 😉💯

[@corderoblake150]

Hey lex, when it comes to walking around vs. Standing still what camera setups do you use

[@MrFFFTTTT]

Can it do torque plus degrees turn past?

[@laurenfaithfritz]

Hey Lex! Diesel tech here wondering about sizing for the carhartt pants. Do you buy them mens or womens and how do you pick for sizing? Thank you!

[@nilsonsantos3920]

Show!

[@waldemercado3743]

God blessyou desde puerto rico

[@BdeSimon]

Holy shit that thing is massive 🤯 its bigger than the 2 digitals i use at work in the mechanical field. Why did they make it so big and heavy?

[@kiralypeter88]

10:50 That's one of the reason why my cooworkers don't like torquing fasteners. It's stupid, but what they say is when you torque them to specs everyting is loose. They overtorque everything with regular tools after using the torque wrench so there's absolutely no point of using them. At least when you work with regular old dudes that don't trust specs. haha

[@amoledor]

It’s so big though!! Would it be worth it for automotive work?

[@c43805]

Most definitely put a ring on her!

[@acedrew07]

Women doing tool review/ tutorials is something I didn't know I needed

[@bobbymoss6160]

Damn, that's huge.

[@tonymuthafuckingunn]

Ima guess she is tiny, so it may appear bug, but my snap on is slightly smaller than this. Snap on says it helps with accuracy.

[@Recoverybjj]

Fuckin sweet dude.😮

[@danariusrobinson5215]

Look what you've done im super hard now ready to loosening the over tighten nut.

[@ChrisS-oo6fl]

I have an odd feeling this particular review will have extremely good viewership numbers with multiple references to it as guy’s rewatch it before making a decision to buy one.

[@ChrisS-oo6fl]

I think (Nm) might actually be Newton Meters. No biggie, but I’m sure someone will comment with a correction in a less polite manner because, it’s the internet.

[@bigvig86]

😂😂😂My thoughts exactly!

[@Full_Circle_Automation]

When I went to classes for terminations. They told us to torque 3 times if it had a pressure plate. 1st 80% , 2nd 90% final 100%. If it was screw on wire 2 times 1st 90% and final 100%

[@tonymuthafuckingunn]

Do the back off? Just curious.

[@meomarte]

I´ve also been taught that stranded copper settles, so it should be torqued to spec some time after first making the connection.

[@Full_Circle_Automation]

@meomarte I was always taught at the 1 year follow up set your torque to 80% of the final torque. If it moves at 80% replace the lug and re-terminate. I've seen to many times where a guy checks the lug and turns until it moves. All that does is over torque the lug and cause a failure

[@ShainAndrews]

@@Full_Circle_Automation Your training is correct, and very much industry best practice.

[@dustinkrebs8229]

😍😍😍😍😍

[@HVACQualityAssurance]

NOT trolling, but, @6:35, that measurement is *NEWTON* meters, not nanometers🤦‍♀ FYI, Newton-meters are the metric equivalent of ft.-lbs.😉

[@evanlegge6456]

As a mechanic with this, a digital snap on one, a split beam mac, and a basic ass maximum tourque wrench. The cheapest one is somehow the most accurate 😂😂

[@evanlegge6456]

Had the snap on and Mac one recalibrated recently and they were out but after 3-4 years with Canadian tire shit, it was basically dead on😂😂

[@jimsvideos7201]

NASA uses the idea of a single calibrated torque tool _checker_ to check each tool at the start and end of every shift. That's overkill here but maybe you could talk your local tool supplier into getting one of those testers, that way you could check yours without having to send it away for however long that takes.

[@nickmartino2839]

Awesome

[@mathman0101]

Gedore do a good one for testing torque calibration. Of course the test calibration also needs a separate reference as well and will need retesting as well.

[@marceliopaiva7923]

Feramtas são o que tem de Melhor no Mundo! Formula 1.❤❤😂

[@silver4415]

Nice 😅

[@thelastelectrician]

Happy 8th of March 🌹

[@HairyBottom]

I’m more interested in that orange water bottle.

[@mnblkjh6757]

👍🙂

[@nathans5773]

Comment for the algorithm.

[@user-gj6ol1kc7o]

Крутая девчонка! Не понимаю язык, но тут и так всё понятно)

[@user-qi6ez4se4r]

I'll stick to my milwaukee 3/8 impact for non critical torquing of bolts. For when I need an exact torque, I can't go past my warren & browne deflecting beam wrench to finish it off. For the last 5 years I've watched the stahlwille torque wrenches my company provides consistently fail calibration, all it takes is one guy putting it away whilst its set and then a big temperature change occurring and its fucked.. My warren&browne is cheaper and it just works. No fucking around and not much to go wrong with it

[@kurtzbradley]

I’m back.

[@ahmadakimullah1473]

👍😎😊😂 like 👏

[@marceliopaiva7923]

No Brasil chamamos de

[@JasonsLabVideos]

Are you saying you use Milwaukee tools ? Per chance ?

[@whiteknightcat]

😂

[@x3r9g6]

great video. You keep saying twerking instead of torqueing

[@lanceboudreau3630]

Wish I could find a woman like her around here !

[@JLRamosAbreu]

Hello, you do an excellent job every day and you are worthy of admiration and I love your content. I would like you to make a video explaining how you use the Jobber application to manage your jobs. Greetings and Blessings

[@Adones09]

I paused at 5:58, had to comment, I've had to rewind and replay several times to verify, but so far at at multiple parts, you are saying "twerking" instead of "torquing"? Not trying to be that guy, just trying to verify that i'm not going crazy. 1:08, i heard Twerking... At 9:06, clear as day you say Torque, but at other times I'm hearing Twerk. Might be the NY accent.

[@user-xw7rs3xw6u]

🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹

[@andyneipert2527]

Can I check you out

[@snoopiedadawg5920]

Women and tools damnn thats hot, sorry i went there guy’s. amazingly in depth review tho💯

[@julioalcala4084]

I like donuts

[@whiteknightcat]

I actually prefer doughnuts myself.

[@daz4787]

noice

[@Volk777volk1]

Выходи за меня!!!

[@unclebillscamping]

I use this and the wrench everyday at work and they are crap. The torque wrench is to big to use in most spaces. It will not torque to spec without hand tightening. I would also add that the push switch has a flaw where the button falls out over time rendering it useless.

[@johnparkerzabala]

Done 🫡🙏❤️

[@Beansswtf]

😺

[@richiejames928]

Nano metres tho 😂😂😂

[@ranjitsian5481]

Nice and looking lovely girl 🌹

[@buIIiez]

Came for the girl.. stayed for the tool. I need one of them Milwaukees 😭

[@terryburke2587]

Good review but I'm not a fan. These are big, heavy, and expensive. $500 for a torque wrench is ridiculous.

[@terrance4721]

You're beautiful & successful 😮‍💨😍

[@gregeconomeier1476]

I'm sure it is a good tool. I do not understand the size, it's huge. It's 3/8! Not very functional for my purposes.

[@asianpennywise3809]

i didnt even see the torque wrench

[@sjfk1306]

Nano meters? Uh? Newton meters…

[@ArcFlash89]

Damn that thing fat 👀

[@PD-we8vf]

You put it in crooked.

[@whiteknightcat]

If I only had a nickel for every time I've been told that ...

[@Claritin24]

Hilarious

[@nathanr.8556]

?

[@whiteknightcat]

??

[@fluke196c]

nice toe

[@louripp1533]

Do you drive barefoot?

[@halhudson4009]

Has anyone seen My avacado lime ranch dressing ?!?! I can’t eat tacos without some ranch

[@DanielRapson]

I swear to god she keeps saying twerking instead of torqueing. Anyone else notice?

[@MrHandsomeferny]

Only fans?

[@TODD-KOBELL]

I'm not sure if I'm supposed to treat you like one of the guys on the job or like I want to get you on a date! Ill just keep it PG. Awesome review.

[@arniesantacruz4513]

Wowwwww ms Victoria secret model im so glad the you know about all this tools 5her alot of beautiful girls there the they don't have no idea what are talking about most of this beautiful girls they dont even know how to boil water this days😅😅😅 thank you so munch for all you videos god bless you and keep up the good work 👍🏻👍🏻👍🏻👍🏻👍🏻❤

[@FM-Patriot]

OMG I just saw how much this thing costs!!! Anyone paying this much for a tool that has totally unreliable accuracy is getting Milwukee'd right up the ass! lol

[@FM-Patriot]

I know your a shill for Milwaukee but you need to get rid of that torque wrench. I saw one testing and then two more testings on that wrench and the accuracy is TERRIBLE! Total junk!