Milwaukee M18 ONEID2 vs Parkside PDSSAP 20-Li B3

I'm a bit of confused after this video. On one side when screwing chipwood screws the new Parkside Performance PDSSAP B3 is performing more than better. A real match for the Milwaukee M18 ONEID2. As far as it goes for lug nuts removal - buy yourself a proper tools - those two are not such.
Not sure why the Milwaukee is stopping so strangely - some protection or some defect...
And not sure why the overtemperature protection of the Parkside kick in just after the smoke...

[@3.14cemaker]

Had some experience previously with Parkside warranty. Sent them the tool and 4 days later got new one as a replacement. So service is good, no questions asked. 5 years warranty and price tag of 60€ makes it no brainer for my personal use.

[@ledzoltan]

Big like for the parkside because of the pricetag and the 5 years warranty.!

[@SokolActor]

Parkside 👎 is not good i have 2

[@andreisima7408]

Parkside îs good îs low price îs verry good!!

[@NoisyBadAss]

Compared to its price, the Parkside seems to be a pretty good choice for a DIYer.

[@icku]

Definitely!

[@zsolttoth8914]

It is work only one time! after couple of minute of use, its burn!

[@TheRedSign]

@@zsolttoth8914 5 years warranty

[@ljximo]

​@@zsolttoth8914eso piensas porque no la Probaste para lo que está diseñada funciona a la perfección y sobre todo teniendo en cuenta que la melwaukee cuesta 5 veces más que la parkside

[@charlieward7606]

even for a professional they can work if its a side tool or something you use less frequently, an old crew i was on had a couple Parkside tools, they werent the main tools, more backups but they lasted for years and werent treated kindly! me and my friend do loads of work with his parkside impact, we are both mechanics and cars nuts, work multiple days a week on our cars, do drift events and such fairly often so it gets a lot more than the common DIYer and its been a couple years and its never missed a beat. its insane what you can get for your money nowadays, cheap tools used to be absolute trash but nowadays they can do some serious work

[@ondrejluptak5698]

Honestly, I can't imagine how I could use the parkside on max torque for that long period in one use as in your power test. So in my opinion is smoke after extremely long power test a bit irrelevant for daily using... Anyway, it was great to see what can happen in case of rough use👌 thank you for your great comparison

[@fusshful]

Exactly, whats the point to stress a machine after 5s of torture...

[@ondrejluptak5698]

@@fusshful 14:30 to 14:58 it seems to be more like 28s and not 5s. What do you think? 28s is absolutely extreme situation which can not appear during normal work activities. I can not imagine 28s of full throttle in the one use.

[@fusshful]

@@ondrejluptak5698 - yes I agree, I mean whats the point stressing more than 5s

[@ondrejluptak5698]

@@fusshful everything is clear now 👌😁 and I also fully agree...

[@ondrejluptak5698]

@@fusshful I did not read your comment correctly so just misunderstanding from my side 🙂 sorry

[@geniusosa]

Świetne porównanie. Najlepsze jake znalazłem na YT 👍👍👍

[@josemanuelprieto3142]

Muy buena comparativa, creo que ambas herramientas tienen protección por sobrecalentamiento y sobrecorriente. Sin duda la herramienta parkside está muy bien calidad/precio, merece la pena. Cómo bien has dicho estás herramientas están pensadas para tornillos en madera o máximo métrica 16, no para camiones.

[@catalinconstantin4343]

Foarte bine spus! Mai mult de atât Parkside l-a ținut mai mult în sarcina fără oprire, nu e corect

[@matthewdawson7996]

As with anything in life consider what you will be using power tools for before buying, it's that simple!! If you're doing light/mid duty DIY tasks the Parkside will be more than capable. If you're a tradesmen & your tools are your life blood & take lots of hammer then Milwaukee is a far better choice, I'm a plumber & used to buy budget range cordless tools (because I couldn't really afford better) & I usually would end up replacing them yearly, got full Milwaukee now & had some going on 10 years & still going strong

[@christophedelestay9848]

Est il possible chez Parkside de trouver des pièces détachées comme avec Milwaukee? Je change souvent les gâchettes de commandes sur mes outils après quelques années d'utilisation sur les chantiers.

[@topoftheleaguemostlygamer3021]

I got the b2 model and I'm waiting for a replacement because after 4 days of light work it now only turns the light on but the motor won't activate

[@Andrius1115]

Was that Milwaukee brand 1/2" adapter which you have used? I had a Makita, but it broke on 3rd bolt using this Parkside impact drill.

[@alinalinu1709]

On the Milwaukee not the tool was the problem. But the battery got hot and shut the tool down and went into protection mode. If you had changed the battery with another one the Milwaukee would have worked perfectly.

[@faquir885]

Thank you for show us that, milwakee its all time stopped when you test the tork and the parkside not stopping anylore that why maybe the parkside was smell not good but finally it s work !!

[@leendert2029]

yay!! Youve managed to get a temperature overload!! Congrats!

[@amy40c]

Parkside B2 actually had overload protection and now they removed it in B3?

[@calumward1192]

Strange the rpm dips after a second of the trigger being fully pressed, do you think it's like that so it can get quick impacts in a short space of time for fastly undoing things like screws in wood? I can see it being a useful feature if it was able to be turned on and off and if you could control the rpm but I'm not sure if it's a feature or a flaw 😆

[@martinskamla6789]

It only drops in rpms if it doesn’t sense a load It does not drop in rpm when actually in use….. it’s programmed this way just to protect the gearbox bearings from excessive rpm’s

[@ArmouredSP]

Is the parkside strong enough for bolts on a car?

[@davidfps18]

60 nm? Is there any conversion needed? Iv seen torque over 200 on some other tests. Anyway , if is so close tork (dispite conversion)between the tools i think Parkside wins. Even with the fumes/overheating i think for 90% of use cases its enough because we dont need to be torking for so many seconds without a pause. Great job!

[@icku]

That's the dynamic torque, not working torque. Some info on the subject: kzbin.info/www/bejne/l2nNgotpoJJomMU

[@davidfps18]

@@icku thanks. Had no ideia, so this dynamic torque is the force of each impact. What they have on box and advertise is the working torque over the 15 seconds then.

[@icku]

Yep, basically. But there is no standard on this. Each brand is measuring it in its own way :( kzbin.info/www/bejne/p5jIh5Wbfa54fqc

[@davidfps18]

@@icku As longe they are compared with same methods like you did perfectly , doesn't matter the type of torque the companies use to advertise they're tools ✌️

[@merktime7711]

Does your milwaukee impact driver wobble on the inside if you move it back and forth rapidly? Mine wobble a bit, it feels like the Motor is lose in the Inside

[@icku]

Yes it does. Just like i said in the video - all impacts "wobble". That's due to the hammering mechanism and its perfectly normal :)

[@merktime7711]

@@icku ahh sorry, yeah you showed it. I was looking for a newer Video of someone who Reviewed the m18 for the question. Thank you very much

[@icku]

U welcome!

[@DoomZoone]

My trusty sleeping b2 gave up two days ago. Today I received a b3 by courier. Amazing

[@fair09]

parkside replaced your old b2?

[@OMARENGG22]

Great review 👍 That what everyone wants to see

[@icku]

Glad you enjoyed it

[@selimguclu625]

The parkside is for sure worth the money. I bought it for 50€ and got it yesterday. I changed my brake discs today and this took with 8Ah battery worked very very well. So, i dont need to buy 150€ mikwaukee for a tool which i wont use every day.

[@nth7485]

Thank you for this

[@sddiymakeitworthit7512]

Nice presentation 👍

[@zanko7007]

That charger u use for parkside i read somewhere that charge battery to 80 or 90% only

[@icku]

93% to be honest. I couldn't get it to charge more.

[@zanko7007]

@@icku yea i think smart charger is needed to full charge idk i dont have smarg bateries yet

[@loochan325]

Charging to 80% get the pack last 3X longer, as in retaining 60% of the original Wh for 900 cycles instead of only normal 300. Even more then that, having lower max voltage after charging also protect the cells from developing dendrites that shoot through the electrolyte which further destroy the cells.

[@lezbriddon]

the 4.5a version charges to a round 80% on dumb batteries, the old 2.4a charger puts more charge in.

[@MrHellMoe]

@@zanko7007 Even with smart charger you cant charge some of them fully. I contacted support for that, they send me a new, but I cant charge the new one even fully.

[@s.g.d.l.8111]

Ciao ottima dimostrazione, comunque sono ottimi per uso hobbyes e ho molti articoli parkside e ne sono soddisfatto e non solo io ho conoscenti che li usano per lavoro rapporto qualità prezzo e più che soddisfacenti grazie comunque 👍👏👏💯

[@comesefosseantani231]

Giusto : solo per hobby, e non continuativo. Ho comprato alcuni attrezzi parkside, durati da Natale a S. Stefano ! Se devo spendere soldi - anche solo per hobby o lavori in casa - mi oriento su attrezzi più costosi, come Makita, che ho trovato in ogni cantiere estero che ho fatto : sono dei muli, non si rompono mai e sono affidabilissimi.

[@rich8037]

Almost certainly the Milwaukee protection is cutting in because it's recognised there is no movement. It's a *driver*, not a *wrench*, and isn't expecting to be driven effectively in stall for seconds straight.

[@bucbuc472]

Thank you but it would have been nice to test different diameters and lengths of bolts as well as torques.

[@icku]

Great suggestion! But a video long 35-40 min will be unwatchable :(

[@lechtigarsdunord]

Bonjour, Je trouve que votre test de comparaison entre les deux visseuse à choc des marques Milwaukee et Parkside pendant le test de puissance ne me paraît pas très équitable selon moi, puisque dès le départ du test, *vous restez pendant presque 29 secondes !! en continu et à pleine charge !! avec la Parkside alors qu'avec la Milwaukee vous faites des coupures régulière !! pendant le test de puissance... *Dommage car sinon cela reste très intéressant sur tout le reste du test. Surtout la présentation des deux visseuse à choc que vous avez entièrement démonté !! Bravo et merci pour votre travail ! bonne continuation. 👍😉

[@vatrica1]

Something else happened, strange.... How the hell will it not smoke after you use it for almost a minute working in place without turning the motor for ventilation

[@icku]

You definitely need to read how impact tools work :) Making such claim as above is at least not smart.

[@haroldjones12]

for a fair comparison you should be comparing it to the 2953 since the Parkside is newer and the 2853 is 4 almost 5 years old

[@icku]

You are right to one point. 2953 has no bluetooth connectivity. I was looking for the Milwaukee model as close to this Parkside model as possible.

[@hasanaydin22]

Can ı undo my cars wheel bolts or not with the parkside or milmwuake

[@icku]

You probably can, but those are impact drivers not wrenches.

[@marekneubauer5565]

Where can I buy the B3 version?

[@martbouv3332]

Lidl shop online i think

[@thomasschafer7268]

@@martbouv3332 no only b2. 😁🇩🇪

[@nicksrandomviews1296]

I've never heard of Parkside and they both have the same warranty but the milwaukee is tried and true.

[@user-ps5df5qy6u]

Nice video, thank you. The Milwaukee costs 6x more, interesting comparison.

[@jakubhradnansky992]

Parkside has load controller...when it doesnt need full rpms or doesnt need full power of machine , so machine decrease rpms

[@davidperry4013]

We cannot get Parkside tools in the USA yet but, we have Lidl. Parkside would definitely beat Hart Tools.

[@icku]

Well, sooner or later Lidl will start selling them in USA too :D

[@davidperry4013]

@@icku when it comes to USA. The parkside tool may be put on the apprentice category instead of DIY/Single use category according to VCG construction

[@bogdanmongol9518]

It is not worth buying Parkside in US, as long as you can buy at Home Depot branded tools at almost the same price with Parkside. In Europe, Dewalt, Milwakee it very expensive due to taxes.

[@KhanhNguyen-nm8wx]

Mua hàng tại đâu hả bạn

[@michaeltb1358]

Prices?

[@monsterjamchris]

I sold my Milwaukee m12 only for buy the parkside pdssap 20-li b3. And the parkside feels much better in Many ways, the grip u get from the handle, the control, power and even the design. The Milwaukee was brand new since I bought it, had it maybe around 1 1/2 year and start to loose power, had it at service but wasn’t get better. I feel that the parkside it’s a lot better for the money, then u also got 5 years warranty.

[@radekb2531]

Best Parkside -the test was not the same time video 13:20 -15:04 Parkside was loaded for a longer time in the test.

[@sundayomeje6866]

True

[@trainermike6019]

i think i will even use this in professional after my two dewalts got defect in 1 year.

[@MrHolzwood]

Što se tiče sporijeg ubrzanja mašine parkside,verovatno jeftinije mašine imaju stariji tip elektronike i on je sporiji,u odnosu na milwakee...to je normalno u tom cenovnom rangu.

[@sipsip2196]

Uh kako gresis, ubrzanje parksidea je brze i radi brze od milwakea, ali ima sigurnosni mehanizam kad elektronika ne ocita opterecenje uspori okretaje,, reko bi naprednija elektronika nego na puno skupljim alatima.

[@bachmed00]

The non constant rpm is to instantly drive in a screw head and then its starts to gently drive it in further

[@lorisdenobili3602]

Buonasera io stavo cercando un avvitatore a batteria impulsi per molare le ruote della macchina

[@ostravan]

Milwaukee vs. Parkside, 360EUR vs. 60EUR. Za ty peníze ten Parkside odvede dost dobrou práci. A to už ani neřeším rozdíl v ceně baterií 😅

[@surfreadjumpsleep]

Milwaukee is more like 260 euro, no? And is parkside really 60? Milwaukee is definitely drahi jako prasa!

[@robiruzic]

@@surfreadjumpsleep milwauke for 260 € hmm more like 260 x2

[@michaswieca2826]

Milwaukee is 70$ tool only 120 with 3ah high output battery

[@michaswieca2826]

@@marekdurina2422 home Depot

[@MR_G92]

I have a parkside combi drill, it's just as good as my brothers milwaukee equivalent. My of my other tools are milwaukee m12 tho

[@icku]

Thanks for sharing

[@samirazarzar6279]

I had the parkside model, b2 model. Unfortunately, it burnt at the second use in the torque selector area....😐

[@icku]

Sorry to hear that

[@samirazarzar6279]

No problem, i have a lot of parkside tools, but the last tools i bought i had no luck. I bought the dewalt DCF850 to replace it. It has électronic protection against over-heat.

[@nikolaydodev]

Наистина има подобрение в PARKSIDE-а. Прекъсването на Milwaukee-то ме озадачи и мен. Започвам да си мисля, че подобна "защита", ако мога да го нарека така, е била вградена в електрониката на верися B2 на PARKSIDE, но знае ли човек. Последните ти думи от видеото обаче са си точно на място! Наистина в крайна сметка, това са ударни ВИНТОВЕРТИ, а не ГАЙКОВЕРТИ, и следва да се използват по предназначение. Някои хора очакват от подобни машини чудеса...

[@icku]

Най-вероятно е защита. Но толкова бърза да се включва. Ето видео на друг потребител и при него почна така да прекъсва и коментира, че е прегрял: kzbin.info/www/bejne/rYemeZipgd9mrqc

[@aleksandars.4690]

Ненормални ли сте да сравнявате евтин пластмасов боклук с нещо като Милуоки........просто няма да издържи времето, за което ще ти издържи Милуокито. Да окей, ако само една година ще го използваш - купи си. Но.......не е чак толкова по-евтино, че да си заслужава. Смешно е да се сравняват несравними неща.....

[@user-ps5df5qy6u]

@@aleksandars.4690 Ти сериозен ли си? Сравняваш продукт за 1000лв. срещу такъв за 250лв. (ориентировъчна цена заедно с батерията) и казваш, че "не е чак толкова по-евтино" ?! Поправка: Цената само на машинката, без батерията е 750лв. с/у 119лв.

[@gamingradeon]

@@aleksandars.46905 year warranty

[@user-ht3pr3ss9e]

Even though overall the milwaukee performance is better, let's keep in mind that the milwaukee is around 5 times more expensive...

[@csimone1986]

When you supposed it's overload\overtemp protection...seems problem from battery or contacts because when motor stops also the light on force number blinks irregular...like leak contact

[@wayevs]

Hmm interesting comparison. 60 vs about 120 pounds. The parkside seems to outperform the Milwaukee, but ypu can see the quality difference in manufacturing and wiring in the milwakee is far superior. The temperature is a big concern for the parkside it jas no fail safe like the Milwaukee. Im guessing parkside have done some sort of consumer research because the product is cheap to begin with how many people actually go and claim on the warrenty a lot probably throw it in the bin when it fails so the 5 year warrenty thing is a smokescreen and they can obviously afford to supply the few who do claim as its a cheaply made tool. Im not saying its a bad tool it perfectly good for light diy projects imo, bit for bigger projects id take the Milwaukee anyday twice on sunday

[@MrAsikisgrg]

You show clear that you wanted to take out parkside and burn it just to show the other as the best. You also use the parkside more time with no break. You didn't respect it like the miwalke and prove that you want to kill parkside for your reasons. Great results. BRAVO!!! You have the way to do what you want. Give me the miwalke and I can also make it burn for you as you did!

[@icku]

Take a good look at my channel's videos. Can you count how many of them are about Parkside machines? Cuz I can't. And you blame me for wanting to kill Parkside for "my reasons". You win the prize for most preposterous comment this year :D

[@mBaggins]

Interesting video mate. The Parkside one looks like a pretty good tool especially for the money. I'd consider buying one but the thing thats kept me away from buying Parkside tools is they seem to constantly force you into buying their newer tools by changing the battery housings. Also may i suggest when you do tests such at the impact one at 14/15 mins into the video can you turn down the volume when you do the edit. It's very loud as a headphone user and annoying to manually mute the video

[@andreipopescu1]

the battery housing is the same as at least 4 years ago

[@icku]

Good call!

[@mategazdag6103]

Bro, whate are you talking about ? Do you use it daily , for excessive time, earning money wiht it ? Buy a 300+ EUR professional tool. Hilit, Milw, DeWalt, Bosch. Are you using it aournd the house a few times in a year ? Well, buy a Prakside perf. for 60 EUR. Tbh, you are the mad, with a lot of useless money, abolsutely needlessly to buy a professinal expensive tool to sit in the corner. Like lol, just becasue you can say on the internet you have a Milw. Bro.... Like seriously what is wrong with people. Bro dont spend 300 cuz i am sure it is too expnesive just for a few times and its hurt to pay this much, guess what .... go live in fear do not buy a parkside, and guess what, Work will be never done, pay for someone to do it. MAD WORLD! Bad, bad Pakrside, no one likes parkside, bleah.... yuck... yet how cool and good if you have it around the house, and do the work in minutes. I will never understand this mindset. You can buy a full line parkside from 1 price of a Milw. :DDD plus batteries. If you are a so professional company, so professional man, i will never understand not just you, rest of you..... what are you doing at a parkside video ? you are so professional than waht are you doing here ? yeah beacuse no matter how preofessional your company, for a few uses you will not buy a 8x higher pricetag machine no matter how muhc you cry here. Because this parkside will do the work. Just do not tell anyone. Bro, guess what these machines work, do the job. Just handle it in its own place of the machine tools world . Not preofessional, yet does the work. In these mindset you should never buy nothing just expensive tools, never save for your company. And cry if its stops working beacsue you never use them. Cmon....

[@mBaggins]

@@mategazdag6103 I didnt say anything bad about Parkside?

[@mategazdag6103]

​@@mBaggins You right. Just tirggers me every time when people do not want to handle things on its own place. Sorry if it written a bit raw. But i keep my op. I still think this is not a good sate of mind. Pakrside tool is still more than nothing. It was made for people who needs more than nothing. Yet. As soon as you start using professionals tools in different indsutries, you will realize that one of them and each of them are still overpriced..... These are tools at the end of the day.... Not rocket science. :D ANd as the car industries or any other industires the income will be the most important, Becasue you can charged 8x more., Cuz B O S C H. Parkside is also a germany tool designer, produced work tool. They even start to learn how to make tools. I do not know why is it hurts to people. Not you... but a lot of people. Nothing new behind the sun!

[@broderperdurabo]

Oh! Wow.. A consumer product from a supermarket that cost a third of a "brandname" starts smoking... The Milwaukee is a pro tool. and a supermarket tool outpreforms it.

[@sencoo9670]

you don't do the same on both machines, you're funny

[@broderperdurabo]

Parkside is the best, but as a professional, i go with Hitachi or Dewalt. As a "user" buy Parkside. a third of the price, and spareparts are to find.

[@izoyt]

you men hikoki? it's under this brand now

[@user-kk5vh1zb5u]

Parkside 60€ vs 350€ Milwaukee + akumulator 8Ah Parkside 70€ vs 265€ Milwaukee 8Ah

[@Pavel05d]

I do enjoy your reviews, but the tests you are doing are excesive and I don't really see them being done daily, by a proffesionist on the job. When you see it doesn't do anything, you don't insist unless you want them to brake just to try and get the job done. For having a tool around the house and DIY on occasion I find Parkside to be the best choice. A proffesional would surely have tools from makita, milwaukee etc to get the job done. I would appreciate if you would do these reviews from DIY-er point of view. Thank you!

[@eraldoshafi7677]

Try Bosch parkside is the imitation of Bosch

[@Proiectediversediy]

There is only one impact driver there.The ather one is junk.

[@NerdyThrowbackTech]

Thanks for the video

[@SBLedeni]

The test is not realistic. Milwaukee was 18s und Parkside 28s under full load.

[@marjanh.6666]

it s not fair,it didn t work like a park site

[@FENIXDJBEATS]

Ха да видиш ти,милуоки-то малко разочарова тоя път макар,че не подпуши като парксайда и тъкмо когато беше напът да ми разбие "мечтите" тръгна отново.Направи ми впечатление на парксайд ,когато на празен ход натиснеш копчето звука е един ,секунда след това звука е друг ,предполагам че се отразява и на оборотите. При милуоки това го няма,обаче защо като го качи на нютон-метъра започна да прекъсва топъл/студен си остана загатка.

[@icku]

Мдам, това Milwaukee ме вкара във филм снощи цяла нощ да диря дали само моето е дефектно или това е някакъв техен feature... За оборотите си прав, но прекалено за кратко се менят и не мога да ги хвана с оборотомера.

[@naikotechnic7315]

Това е защита предполагам на милуоки , щом Се върна в българия ще пробвам моето дали така прави . Моля качи от дино метъра кое колко сила има .

[@FENIXDJBEATS]

@@naikotechnic7315 втория път когато качи милуокито на динамометъра ,тогава беше студен

[@icku]

Най вероятно е защита, но защо се включва така бързо... kzbin.info/www/bejne/rYemeZipgd9mrqc

[@naikotechnic7315]

Имах предвид какво показва като сила единият и другият като сила нм на динометъра .

[@user-ck3lo8xl4c]

Кой от двамата ударни винтоверти е по - хубав

[@icku]

Малко съм пред дилема кой наистина. Не очаквах Milwaukee-то така да прекъсва. Иначе Parkside цена качество за този модел няма равен.

[@janee7995]

For an electrician , plumber, Carpenter the performance line is already something to consider especially for tools you dont use 24/7 Only thing that really had to improve is QC as 2 similar machines can have completely different torque.

[@contrueces1]

Milwaukee es muy caro no merece la pena 350€ , Parkside tiene buenas herramientas a precios competentes 100€

[@user-ck3lo8xl4c]

Защо винтоверта Parkside запуши

[@icku]

Късно му сработва температурната защита.

[@robiruzic]

For the price there is no better tool then parkside performance it is not professional tool as milwauke but also is not the price

[@icku]

Agree!

[@digidandan]

Very often in your reviews I hear that parkside is an amazing tool. No, it is not. It is a junk, it last a day of 2 of a real work. Or even not. Even if it's in a 30-50 euro, it's money and time lost on a junk tool. They call it park-sheisse. Park-shit. Look at the delay after releasing the trigger. It would drive me nuts every time I should use it.

[@icku]

There is no other brand on the market with better price/quality/warranty ratio. That's why its an amazing. They might call it whatever they want, but not for long. Lidl is making serious efforts to make the brand reputable. Just like the Chinese smartphones from 5 years ago. Yeah they were shitty, but look them today ;)

[@Dingo_Bingo]

Ok, but the Milwaukee ist very very expensive.

[@mparmpadreas]

Το τελευταίο τεστ δεν ήταν ιδιαιτερα δικαιο. Πολύ πιο ηπια μεταχείριση στο milwaukee.

[@Dingo_Bingo]

Price for ONE Milwaukee you buy 10 Parkside.

[@icku]

Great point!

[@hliask]

To ekaces esy to parside

[@papakarlotools]

Рязанский акцент не спрячешь

[@icku]

Далеко от Рязани ;)

[@papakarlotools]

@@icku мужчина!

[@RD-ft7js]

Porównanie Trabanta do Rolls Royca .

[@sizif717]

Брей, тея Парксайд са направили по-мощен импакторен винтоверт от Милуокито...А и на дизайн са го издокарали. Колко ще държи във времето...един бог знае. Имам две такива 8-амперови батерии на Милуоки, но никога не би ми дошло на ум да ги сложа на винтоверт..:) И да се вра из мебелите с тях, ужасна работа.

[@andrzejwolder9819]

100times i teake few parkside rather than 1 milwakee

[@rodakpolak560]

to nie jest problem z obrotami u parkside.Elektronika reaguje na obciążenie i jeżeli wykryje że go nie ma to obroty spadają. Nim zrobisz film zdobądz wiedzę.

[@icku]

Haha, a wszyscy inni producenci nie pomyśleli o tej nowości. Tylko Parkside odkrywa gorącą wodę. Proszę o brak głupich komentarzy na moim kanale.

[@rodakpolak560]

@@icku nie masz racji, parkside wprowadza wiele rozwiązań np: bluetooth.Inne firmy jakoś tego nie mają .Poczytaj .

[@icku]

Wyjaśnienie mi dokładnie, co wprowadza Parkside, jest więcej niż zabawne. Najwyraźniej nie zdajesz sobie sprawy, że na moim kanale zamieszczane są filmiki z maszynami Parkside na długo zanim trafią one do sprzedaży ;) Parkside niczego nie tworzy, Parkside kopiuje Milwaukee, Boscha i tak dalej. Technologia Bluetooth jest stosowana w firmach Milwaukee i Bosch od lat.

[@rodakpolak560]

@@icku zawsze ktoś od kogoś coś kopije

[@mihaimihai6223]

😂😂😂😂😂😂😊😊

[@GabrielKozsar]

BOLTR

[@piterparker9293]

Вроде чувак по английски пытается говорить, а я слышу ру ский... Какого хера?

[@icku]

Не волнуйтесь, в какой-то момент врач пропишет вам слуховой аппарат.

[@user-ps5df5qy6u]

Russians sound a lot more softly when they speak English.

[@romanholecko713]

To ako že naozaj porovnávaš náradie ktoré sa dá kúpiť v obchode s potravinami, s náradím ktoré je "super profesionálne" ?!?! To už nie je ani zvrátenosť, ale úchylka. Prečo rovno neporovnať bicykel s motorkou ?! Veď by sa tiež jednalo o test niečoho na dvoch kolesách.

[@ledzoltan]

It is the "industrial" version from the grocery store. If you think a tool can only be good if you pay a lot for it in a fancy tool store, than it is up to you. I almost bought the whole performance family with 2 pieces each one to have a spare if something happens on jobsite. Still the fraction of the price of the milwaukee.. There is 5 years of warranty for the parkside.. How many years does milwaukee offer?

[@johnyM128]

A prečo by nemohol. Na hobby používanie super voľba... Do garáže si nekúpiš náradie za 200e/ks keď ho použiješ 10x do roka...

[@johnyM128]

@@brumtelesko možno porovnáva to čo má :) pozri minimálne je to zaujímavé porovnanie. 8ah a 4ah smart sú pecka, ja som tiež nakúpil performance náradie. Teraz som úspešne spravil konverziu čínskeho náradia kópia makita na parkside batériu - bez medzi kusu :)

[@masnycz5080]

@@johnyM128 Souhlas, ale kvuli temto testum se z Parksidu stalo spis nabozenstvi, ktery nesnasi jakykoliv jiny (jinou znacku) a uznava jen samo sebe :D Sleduju testy vsemoznych znacek (vetsinou videa z USA) a rozdil je ten, ze tam ty porovnavacky delaji lidi, aby ukazali, ktera znacka je jak vykona, ma jaky vyhody, atd. Tady je vetsinou video "cokoliv" vs. Parkside dela fanousek Parksidu, kterej to srovnani akorat vyuzije, aby vyzdvihl svuj milovanej Parkside a zhanil drazsi znacku. Cest vyjimkam, napr. FOR WORK AND FUN. Na druhou stranu budme radi, protoze v naradi je ta zdrava konkurence asi nejvetsi a prospesna hlavne zakaznikum :)

[@johnyM128]

@@masnycz5080 tak vieš ako to je u nas CZK a Sk :) test s účelom dokázať to ocom som presvedčený pred testom. DEWALT je niekde úplne inde ako parkside, milwaukee tiež atď... Parkside je použiteľné za dobrý peniaz pre domácich kutilov :) ale nemysli s i ze je to super voľba pre profíkov :)

[@R_muantea]

Bias review

[@ivansstoev5593]

Вместо да унищожаваш Parkside, дай го на някой който има истинска нужда от инструмент.

[@serjemiloslavsky7130]

🤣🤣🤣👍🏻 Английский пушка

[@dc.pentrumesteri4893]

no matter the improvement at parkside you can't compare to milwache only a fool would do such a thing

[@zip.gianni4045]

☝️🇮🇹 ci vuole la serie blu ....come per Bosch quelli verdi fanno cacare roba da obby se si va sul professionale io consiglio ( HILTI ) costa di più ma non c'è paragone....roba buona ......per chi lavora con usi gravosi e con batterie li lito che durano senza effetti memoria ripeto sono costosi ma quando li provate da professionisti non li cambiate più... .☝️🇮🇹🤣🤣🤣🤣🤣🤚🇮🇹