Milwaukee makes the 3-tool broom holder for the Packout wall mount system for that stuff by the door
@Stonyboot Жыл бұрын
I saw that, I’ll be getting a wall plate back there soon
@terencelarkin5959 Жыл бұрын
Scott we've been in Florida since 1994. We have always had white vehicles including our F350 and Cirrus Camper. And the heat is the reason.
@Stonyboot Жыл бұрын
When we purchased the truck back in 2019, there was only a handful left in all of new England, color wasn't even an option. It was buy this one, wait another 6-12 months, or fly across the country. The next vehicle will be white or light!
@RobertMememe Жыл бұрын
You can always install a mini split with a cassette the no hole in ceiling plus it is AC and heat
@Stonyboot Жыл бұрын
Agreed, but it also has its mounting issues. Still waiting for some parts to arrive.
@kgrafton4582 Жыл бұрын
Scott, I’d go to a welding shop and get them to weld in the aluminum up top where you cut out for the a/c. Probably be just as strong. I’m north of Ft Worth and yes it is hot. Good luck, really enjoy the videos
@Stonyboot Жыл бұрын
That was my first thought, but all of the local places are 6-8 weeks out, by then, It will start cooling down.
@n6cid Жыл бұрын
@@Stonyboot We can only hope it cools down, here in Alamogordo NM it's been on average 115 degrees for the passed few weeks...
@timothylinn Жыл бұрын
Interesting video, Scott. That Packout System is nice. It seems very versatile. I've been contemplating what to do with the space inside the Rack Pack Tower on the back of my Camino 88. I can imagine using it for hanging coats, etc., in the winter months but I think the space would be more efficiently used with drawers and shelves most of the time. The Packout System would let me customize the space on the fly for any given trip. I think you've just provided my solution. You and your channel come through again! Also, fascinating results from the temp gun. I always knew black was warmer but I never realized how much. Growing up in the 70s in Dallas with vinyl seats in our cars, I remember so clearly trying (and failing) not to burn the back of my legs whenever I got in the car during the summer months. My mother would hang a towel over the steering wheel so she could touch it. Our first cars didn't even have AC. Hard to imagine now. Of course, summers weren't quite as hot then either.
@Stonyboot Жыл бұрын
Thanks a bunch! The Packout System is interesting and versatile. It sounds like a perfect solution for the space inside your Camino 88's Rack Pack Tower. Customizing it with drawers and shelves for different trips is a brilliant idea! I have similar plans for use in our 5th wheel "basement" But that will have to wait for the future. And oh yeah, those temp gun results were eye-opening, I'd never compared them before. Black does get much hotter, and I can totally relate to your memories of hot vinyl seats in cars from the '70s (except it was in the 80s. Our truck has black leather seats and they get dangerously hot when you leave the sun on them. Times have changed, and air conditioning has become a necessity.
@toddramsay977 Жыл бұрын
Wow, your whole rig is a little vwarrmm eh? I would be heading for Canada dude! Stay safe, glad to see Sasha is doing well!
@Stonyboot Жыл бұрын
Yeah, it's hot. This week has been 105-111f every day and its a real challenge. All is well, I'm trying to get back on top of youtube, but life has been hectic.
@tg9388 Жыл бұрын
trailer is looking awesome, Recpro is great, I was going to upgrade to that but it must in on the flat roof to work. Oh well 5th wheel front won't work
@Stonyboot Жыл бұрын
I do like their products, I have a "Roof Curb" on order, but it wont be here until the beginning of September. So, that project will have to wait.
@doug2078 Жыл бұрын
Nice job so far Scott !! Organization helps make all future jobs so much easier .👍
@Stonyboot Жыл бұрын
Thanks, it's really nice when I clean up from a project and everything has a home. I still have some issues to solve, but that will come with time.
@Keithfear1 Жыл бұрын
Scott, what about making a box for a window AC with heatpump and mount it where the water heater is? It requires making a bigger hole in the side, but eliminates the concern over the water heater opening. Make the box so it sits almost all the way inside the camper with airspace so the outside vents stay outside and the inside vents are near the edge of the workbench depth. It would let the water drain outside, keep the hot air outside and the cool air inside. Just a thought....
@Stonyboot Жыл бұрын
That's a great idea! I have considered this, was thinking about a Mini-Split. That could work, however, I would also need an additional fan running to help circulate the air. I guess I'll have to google window A/Cs with heatpumps. I do have a "Roof Curb" on order to try installing on the roof. When I finish typing this, i'll go research some window units. Thank you!
@jcoul1sc Жыл бұрын
Would be better and cheaper investment to install insulation. Also a fold out panel to relect the sun on the south side and the roof would help
@Stonyboot Жыл бұрын
It's already insulated, and since I move around a lot, a fold out solar shield would be kind of a PITA. I have some parts on order that should solve my issues. I'll do another video when I get it all sorted out.
@jcoul1sc Жыл бұрын
@Stonyboot yes. Maybe just park in the shade or have a large canopy or inflatable garage over it
@toddramsay977 Жыл бұрын
For your a/c, the way you explained it, is what I would do, but add a cross piece in front of the a/c to tie the 2 sides together. But other than that I think you have a solid plan for it. I don’t know if that boosts your confidence or not, I would execute like you said!
@Stonyboot Жыл бұрын
I have several options on the table now. A "Roof Curb", possibly a window A/C where the water heater goes, and I still haven't ruled out the mini-split. I'll figure it out someday soon.
@user-sk2qh5bt2j Жыл бұрын
Good video bro. Wish I was closer so I could come play with all your new tools.
@Stonyboot Жыл бұрын
Thanks, maybe someday you can visit me!
@seanmorton9114 Жыл бұрын
Other than the vent fan on the AC Discharge of the cabinet the AC is mounted in have you looked at adding ventilation to that cabinet? There isn’t a lot of discharge pressure on wheelie AC units unless you create ducting. In the meantime of finding your permanent solution I would try take the panel off the box it sits in. Cool set up though for the trailer.
@Stonyboot Жыл бұрын
I know what you are talking about. With or without the panel, it stays the same temp. Also, even though the intake and exhaust are ducted outside, for some reason, the unit still create a slight vacuum in the trailer, so I always have fresh air coming in. Everything is sealed up, so I'm going to guess its due to internal leakage. Not worth fixing, I just need to replace it. Still struggling with sourcing parts and finding a "perfect" solution.
@jetah Жыл бұрын
@@Stonyboot dumb question but did you clean the filters on the portable AC? I've seen some floor units that have 2 filters on the back side, a top and bottom separate section.
@toddramsay977 Жыл бұрын
So you have all that because you are a roving handyman or RV tech? Is that for your job? I like that modular system, very flexible. I would maybe duct your air cond output to the ceiling and then put a 60 degree fanned vent.
@Stonyboot Жыл бұрын
Exactly, it's still in the works, but that's my direction. Packout is great, I'm still fine tuning it, but have been busy with other projects for the last couple of weeks. I'll explain more in future videos.
@infinite779 Жыл бұрын
Hey Scott, good to see you after so long😊 How is Sasha?👈 Great and complete video💯💯
@Stonyboot Жыл бұрын
Hi, yes, I've been slow with videos. Life has been a little chaotic, I'll probably do an update video about what we have been up to. Sasha is doing well, Thanks for asking :)
@joanmcerlean7158 Жыл бұрын
“👈”. Yeah, like where’s Sasha? Hope all is well.
@susanclay3692 Жыл бұрын
Have you considered using a curb for your AC unit to sit on. It would raise it above your roof rack system.
@Stonyboot Жыл бұрын
Thank you for the comment! That is the first I've heard of a curb. After I read your comment last night, I started digging. This is a GREAT IDEA! I found something that might work, and i'll double check the measurements soon. This very well might be the direction I go :D
@markmarchie6058 Жыл бұрын
Why not leave the platform and cross bars where they are? Make a platform to mount the AC on top of the cross bars. Then extend a tube up from the roof hole to the elevated AC unit to channel the air.
@Stonyboot Жыл бұрын
That is my current plan. I learned from another commenter that its called a roof or A/C curb. I found on that will fit nicely and it's coming in a couple of weeks. It should work, based on my mental math. I'll have a video about it when the time comes.
@warrenscorner Жыл бұрын
I guess I missed a bunch of videos. What is the purpose of this trailer? Handyman? RV repair? Is that where this channel is going now?
@Stonyboot Жыл бұрын
We sold our Cirrus and are living in a 5th wheel now. I took a break from KZbin for a while to handle some transitional stuff. I'm just making videos about what I do. I don't really have a vision or direction for the channel, I'm just doing whatever I feel like doing :)
@ourtimetorv3151 Жыл бұрын
108 degrees. That’s stupid hot. U have to be melting. Love the trailer setup. How’s the business going? Hope all is well.
@Stonyboot Жыл бұрын
Stupid hot is an accurate description! Things are going along smoothly, all is well :) How are things for you these days?
@ourtimetorv3151 Жыл бұрын
@@Stonyboot Glad things r going well. Loved seeing all that Milwaukee stuff all color coordinated. As for me, I hit a speed bump in the road of life and will be sidelined from traveling for a while. I’ll drop u an email with more.
@corydriver7634 Жыл бұрын
Is this trailer insulated? That might be your issue on the cooling. Also, where does you portable AC vent to? We have a portable AC unit and it cools our 14x14 bedroom down to 70 degrees in the heat of the summer…we live in OK. You might consider shading the trailer somehow like 8n a carport if that’s an option.
@Stonyboot Жыл бұрын
The trailer is insulated, about 1 inch of foamboard. The A/C is vented for intake and exhaust under the trailer. It's not perfect, but it's pretty good. A car port isn't an option and its been in the 105-111f temp ranges, so I'll need to oversize my cooling to keep up with the heat. It's just a work shop, so I'll have to live with some heat, but the current setup isn't really workable during the summer months. I have a few ideas, but havne't had time to focus on them. I'll have an update when I get something solved.
@corydriver7634 Жыл бұрын
@@Stonybootit’s vented for “intake” under the trailer? You’re conditioning outside air? That doesn’t make sense, intake should be inside air. You’re basically removing the moisture from the air.
@drcsep Жыл бұрын
Since you like portability… you shall consider EcoFlow Wave AC
@Stonyboot Жыл бұрын
I already looked at them, they don't put out enough BTUs, but it would be great to keep the truck cool during stops!
@jcoul1sc Жыл бұрын
Paint the wood cabinet to match the Milwaukee or... dont. Up to you
@Stonyboot Жыл бұрын
That's a good idea. I'm holding off on painting until I'm done making changes. But, that would be a cool look!
@jcoul1sc Жыл бұрын
@@Stonyboot Might be too much and look awful, maybe just spray them black matt or satin.
@NikhilKumarReddypnkr Жыл бұрын
Cruise and comfort ac 24v
@Stonyboot Жыл бұрын
I looked at 12v-24v units. My problem is the cost and power supply. I have no desire to build a typical RV power system in the trailer and while trying to find a 120v to 12/24v comverter, the prices started to shoot up. So, I'm trying to stick with a traditional roof top AC or minisplit. Another commenter suggested a "A/C Curb" and I was able to find something that might work. I'll keep yall updated.
@nevysadventuresllc9074 Жыл бұрын
I sent you some a/c information in dm on fb like normal