Milwaukee Tools M18 Router add ons , I bought them all just to put it in a PACKOUT with Kaizen foam.

[@jamies8973]

You had me at "Turn a piece of scrap into a piece of scrap that I've spend a bunch of time on."

[@AndreSisneros-vv4uv]

What is that cool router table conversion you flashed at the beginning? How do I do that?

[@hardtymz2517]

Seeisoily?! I thought this video was going to be about that for at least half the run time?! wtf is that thing!?

[@johnhiggins3943]

That's exactly what I used my offset router for on a hardwood floor recently. I need to pickup the plung base soon

[@hardtymz2517]

The plunge is king! Yea I looked up what to do with an offset adapter and it’s very limited. As badly limited as a full size Dewalt Dremel cutter drill thing. I still haven’t found one use for that nonsense! (It was free) it’s mostly used to cut out electrical outlets?! Literally the harbor freight drywall saw is faster and easier and less messy. What a terrible eclectic tool that was.

[@thegoodfight365]

Thanks for sharing your experience with this plunge base.

[@JakeOfALL]

Glad it was helpful!

[@bloodfrost77]

Thanks for the video. Get some bench cookies to keep material from sliding around when routing, works great!

[@JaySellers]

Dust collection works well with the plunge base...unless you're using a template guide bushing. Learned that the hard way.

[@MrSteamDragon]

Thank you. Do you know if there is a Milwaukee Template Guide kit for this router ? The user manual refers to it but i have not been able to find it anywhere. Cheers.

[@peterquinn350]

Where can we find that packout crate insert with which you built that router table from??? That is so cool to be able to mount the little router under that for site work.

[@JakeOfALL]

shop.jakeofall.com/products/cratecap

[@edwardmoreno964]

What router bits do you recommend?

[@benbible1]

Thank you this is exactly the review I was looking for

[@Chads6Strings]

Whats your thoughts on comparison between the bigger router and the compact? I want the ½ but not sure I'd need it since this one has a plunge and offset acc.

[@Realism91]

I was thinking of making a lipping base out of the offset base for flushing solid edging. Lipping planer's are useful but too expensive for a dedicated tool... How shallow can the offset collet hold the bit, can it go flush to the base plate?

[@mattstmartin9232]

Did you end up building a lipping base on the offset base?

[@Realism91]

I don't do enough volume to need one yet, maybe in the future. It looks like a good idea but none of my 5 routers came with one and with all my gadget buying I've never ended up with the accessory.

[@Realism91]

​@@mattstmartin9232To make the lipping base just template route the offset base to another piece of acrylic, now take the copied one and stick it to plywood so the corner of the plywood is in the center of the bit opening now template route the excess off. Now you just have to keep the router flat on the material so not to gouge anything.

[@mattstmartin9232]

@@Realism91 THANKS!

[@eliasgomez2277]

It is looking Awesome!!

[@JakeOfALL]

Thanks

[@perrys5954]

Thanks for the demo. Doing research before buying my first router and I think Milwaukee is the way I wanna go. Question for you though. At around the 10:00 min mark, it looks like as you are routing the table a black dial just below the on/off switch is turning from the vibration of the router just being on/used. That can't be normal right?? I admit I am a newbie but isn't that the micro adjustment dial? if so your depth was changing as you worked. Thanks so much for showcasing that plunger I think it's gonna be a must have when I get the Router. Would love a response about the moving dial if you could, as that's my only concern :)

[@patricksquires77]

Turn a packout into a router table with storage and sitting on top of the packout vac.

[@FixitFred]

I saw reviews on Milwaukee’s website a few people broke the tightening latch on the plunge base with normal use. I hope Milwaukee either fixed this or there were just a couple of fluke cases of it breaking

[@blaiooo]

Is this dock milwaukee 48-10-5601 compatible with the dewalt dcw600 brushless?

[@robertbossa623]

You mentioned putting the router in foam - is there a set up you’ve done with the compact router in a packout with foam & any of the bases? I don’t use mine often but would like it all stored in 1 box so when I need it - I’m sure to have all of the pieces with me. Appreciate the videos!

[@hardtymz2517]

He didn’t show any of the stuff we came for?? No one needs an offset base except for one very specific job and that’s not worth it for the money they charge for that thing. Where’s the packout router table and foam video?! Jipped again, davey.

[@Jimnachreiner]

Where can I purchase the base? I have the router already

[@mattlong6359]

Do you know if they make a template guide bushing kit for this router ? Thx in advance

[@JakeOfALL]

I don’t sorry

[@kevinhilton8683]

Can you show how to make your homemade router table?

[@JakeOfALL]

I sell them actually

[@JakeOfALL]

There are some videos on her about it

[@hiapo808]

Hey bro, I ordered something off your website a month ago and haven’t received any confirmation or anything yet. I tried emailing you and no response yet. Trying to see what’s going on.

[@hardtymz2517]

He doesn’t sell anything…?!

[@kbguthriehomes2343]

The offset base is a mission to put on that router.

[@universeunknown1880]

Special like for the kid ❤

[@joeindustry]

I have the DeWalt trim router and don’t understand why it didn’t come up with a plunge base for the router.

[@gigshare3947]

$ Some guys own 6 compact routers & 1 plunge base

[@Jake_Warvel]

Will the plunge base fit onto a jasper jig?

[@JakeOfALL]

I don’t know . Sorry

[@skurken65]

I hadn’t heard of Kaizen foam until I stumbled over your channel. What’s the difference between that and the original foam that Milwaukee is selling? Which of the pack out boxes will you use for the router and all it’s accessories. And is there a video on route to show it in all it’s splendour?

[@hardtymz2517]

He jipped us!

[@cuauhtemocespinosa5641]

Is that plunge base compatible with a circle guide kit?

[@JakeOfALL]

Not siren

[@JakeOfALL]

Sure

[@G0rad]

This guy is obsessed w milwaukee!

[@JakeOfALL]

just a little

[@panisimo77]

Nice video!

[@JakeOfALL]

Thanks!

[@devonwainstein9188]

The plunger doesn't fit in any packouts....where you putting the router?

[@JakeOfALL]

It fits in the large, the rolling , ammo can and Crate , but I use the large box for mine

[@josephdg1429]

Have you guys moved yet

[@JakeOfALL]

Yep

[@chazzec]

Where's my parts i ordered 2 months ago?

[@JakeOfALL]

Email us at [e-mail] and we can see

[@ChingonDchingones]

A buddy of mine same waiting month and a half. Not good for business

[@coolceecoolcee3958]

Great tutorial brother! Your videos are awesome!

[@JakeOfALL]

Thanks 🙏

[@kbguthriehomes2343]

I put my router and all the accessories in a crate only thing it fit in

[@JakeOfALL]

yeah, they are awkward

[@devonwainstein9188]

The plunger base doesn't fit anywhere......makitas and dewalts is small enough.to fit in the medium packout box

[@kbguthriehomes2343]

@@devonwainstein9188 i have it all in a packout crate with foam

[@dtigersr1]

I placed an order on November 24 2020. Nothing to show for it. All communication attempts have failed. Paypal has attempted to communicate but failed. I'm afraid he might be a scammer. Buyer beware.

[@JakeOfALL]

What attempts have failed, we send emails out once the order is placed, have you made sure you still check your email that you have setup with PayPal. Now the past week / 1.5 weeks we have been moving so we have not been able to respond to people. But don’t take my word .. msg @milwaukeetoolatiddic or KBgurthe or anyone else with our products

[@michaelrobinson9643]

Wear hearing protection and put it on your kid.

[@mmadchef808]

Nice jammies 🤪

[@JakeOfALL]

Hahaha

[@Jamba_Samba]

I thought it was an internet router 😁😁

[@bennyvenancio4667]

hellos little boy

[@JakeOfALL]

haha

[@ex8280]

how come no one uses a mask? Wood dust can kill you over time.