MILWAUKEE TOOLS MAGNETIC DRILL PRESS 4202 REPAIR PART 1

  Рет қаралды 18,036

Wes Tullos

Wes Tullos

Күн бұрын

Пікірлер: 33
@nathanielschmierer1674
@nathanielschmierer1674 3 жыл бұрын
Did you ever get it working? Looking forward to part two!
@WesMakesStuff
@WesMakesStuff 3 жыл бұрын
I’ve still got the parts sitting in a box. The issue with it was that the main board had been destroyed and several components had been torn off the board with their traces. I’ve got a new board, but haven’t put it together. I actually shot part 2 a couple years ago, but lost the footage. If I can find it, I’ll upload it. Hopefully at some put I’ll do pet 3 and put it all back together and get it running! Thanks for watching!
@kevinthomas895
@kevinthomas895 3 жыл бұрын
Do you still have that old panel sitting around? I just bought one and somebody lost the yellow reverse push button. I can't use it at work until I get that sorted out.
@WesMakesStuff
@WesMakesStuff 3 жыл бұрын
Let me check. This project is still sitting in a box, but life called and I haven’t had the time to fix it after all these years. If I’ve still got the panel, I’ll let you know!
@WesMakesStuff
@WesMakesStuff 3 жыл бұрын
I do still have it. Do you still need one?
@kevinthomas895
@kevinthomas895 3 жыл бұрын
@@WesMakesStuff Actually I'm good to go. After some intense googling I found a replacement push button. Thank you for the follow up!
@brujoezln
@brujoezln 4 жыл бұрын
How you deduct from the resistance value that it is a full wave electromagnet? I have a similar model and I am not sure how to tell if the electromagnet is broke (open circuit). Another thing...could also be that the current being supplied to the electromagnetic base is missing. Thank you @Wes Makes Stuff
@WesMakesStuff
@WesMakesStuff 3 жыл бұрын
I'm really not sure. The PCB had been destroyed. Looked like a screwdriver ripped a bunch of resistors and caps off.
@SteelWorksNationalCity
@SteelWorksNationalCity 4 жыл бұрын
Did you get it repaired, I have same issue of blinking red light. Have model 4202, serial 598c
@WesMakesStuff
@WesMakesStuff 4 жыл бұрын
Hey steelwork, it’s sitting in a box incomplete. Haven’t had a chance to get it back together. Mine had massive damage to the board and I had to order a new one. Looked like someone took a screwdriver to the electronics.
@jameskendrick6909
@jameskendrick6909 4 ай бұрын
Part2?
@ccpowertool
@ccpowertool 11 ай бұрын
I need this drill for my repair
@electronicartis
@electronicartis 4 жыл бұрын
Hi did you get the drill fix?
@electronicartis
@electronicartis 4 жыл бұрын
Did you get it fix.
@andresdelj
@andresdelj 6 жыл бұрын
Nice vid Where did you find the parts? I am looking for the electrical cords.
@WesMakesStuff
@WesMakesStuff 6 жыл бұрын
I did, but im still waiting on them to come in. Which electrical cords are you looking for? The main power?
@andresdelj
@andresdelj 6 жыл бұрын
Wes Makes Stuff Main power and the drill motor cord.
@WesMakesStuff
@WesMakesStuff 6 жыл бұрын
I found the part numbers here: www.ereplacementparts.com/milwaukee-4202-ser-5981001-electromagnetic-drill-stand-parts-c-131_5409_4950.html Then I went and bought what I needed on Ebay.
@BigHayes7771
@BigHayes7771 5 жыл бұрын
Great find what a steal
@WesMakesStuff
@WesMakesStuff 5 жыл бұрын
Just have to put it together now!
@MauricioFloresRubalcava
@MauricioFloresRubalcava 4 ай бұрын
i can help with this repair
@cropsey7
@cropsey7 3 жыл бұрын
I like the "check for ground " idea. No music in the future. nice try though. keep it up
@WesMakesStuff
@WesMakesStuff 3 жыл бұрын
Seems like forever ago since i made this video. I've learned a lot since. Thanks for the comment!
@deanharris7149
@deanharris7149 5 жыл бұрын
What’s the deal?
@joshualewis8002
@joshualewis8002 3 жыл бұрын
Just laying in the scrap pile huh
@WesMakesStuff
@WesMakesStuff 3 жыл бұрын
Well not on the scrap pile. The fella that worked back there had pulled it out. The previous owner had destroyed the electronics and then scrapped it. Pretty common for big companies. When I was at apple, we would literally take hammers to stuff and then throw it in the dumpster. That came from Corporate in California!
@HTX_Metal_Head
@HTX_Metal_Head 5 жыл бұрын
So what ever happen. No follow up?
@WesMakesStuff
@WesMakesStuff 5 жыл бұрын
It's in my garage at the moment. I got part 2 shot and lost the footage. I'm planning on getting it finished soon so keep an eye open
@aliafreet
@aliafreet 6 жыл бұрын
👍👍👍👍
@wakefieldyorkshire
@wakefieldyorkshire 4 жыл бұрын
No background music next time please.
@5822huron
@5822huron 5 жыл бұрын
You put those spades on terrible ..lol
The One Tool I Regretted Most Buying
14:13
Wranglerstar
Рет қаралды 591 М.
She wanted to set me up #shorts by Tsuriki Show
0:56
Tsuriki Show
Рет қаралды 8 МЛН
요즘유행 찍는법
0:34
오마이비키 OMV
Рет қаралды 12 МЛН
번쩍번쩍 거리는 입
0:32
승비니 Seungbini
Рет қаралды 182 МЛН
How to use a Magnetic Drill Press
5:14
ASC Process Systems
Рет қаралды 68 М.
Milwaukee mag drill review
18:30
Classic Work
Рет қаралды 26 М.
Magnetdrill Stand + Tube Notcher (Drill Press)
7:05
The Metalist
Рет қаралды 183 М.
Milwaukee Electromagnetic (Mag Drill) Drill Press 4203 Review
11:29
RFID Locks are way too easy to "Hack"! Let me show you!
11:41
GreatScott!
Рет қаралды 1,3 МЛН
Making Magnetic Drill
18:34
Workshop From Scratch
Рет қаралды 4,6 МЛН
She wanted to set me up #shorts by Tsuriki Show
0:56
Tsuriki Show
Рет қаралды 8 МЛН