Mini 4WD Motor Basic Knowledge 【ミニ四駆】Tamiya Mini 4WD #61

[@xavierniuia-tofa7435]

Hey bro, loving your basic knowledge videos and explenations. Just picked up the hobby couple weeks ago here in New Zealand and been watching all your videos cause theyre nice and simple and easy to understand. You answered alot of my questions with motors in the vid! Please keep making more!!!

[@roscoechannel]

Thank you bro. I was on the Hawkes Bay Facebook group and Tamiya Mini 4WD New Zealand, but the group forbid me to post the link to my channel 😅. But, I respect their decision because I understand that not everyone wants to see my channel. Hehe. Share it to your friends bro and have fun with Mini 4WD! Good luck!

[@xavierniuia-tofa7435]

Roscoe Channel aw true bro? Dang oh well ill listen. Bro is there a way i can grt a hold of you personally?

[@roscoechannel]

I think it's better to ask anything in the comment section. Because everyone will be able to see your question and my answer. So they don't have to ask the same question again and again. I hope you can understand. 😊 Don't be embarassed to ask basic stuff bro. Everyone also starts from zero. 👍

[@infinixx5535]

My favorite is torque tuned and light dash motor,because they are running wus..wus..with minimun worry of klontang..also both are tamiya friendly like my moto "run fast dont crash" 😄😄😄

[@vashashasha9197]

This is some really decent information for someone that is starting out with rc cars. I will probably opt for the power one, cause I wanna drift.

[@roscoechannel]

Thanks for watching

[@kreiyt28]

Same for me! I'm thinking of buying the Power-Dash, since I'm going to use it for an RC 4wd drift car. I'm opting for Ultra and Plasma, though I don't know if they're reliable for long-term use.

[@tamiong]

I had the Hyper Dash 1 way back in 2000, which I left on a table or chair at the venue after a race event. Still have my 22yo Rev, Torque and Atomic 1 motors. Still kicking 😊

[@roscoechannel]

nice!

[@is-johan1518]

Bisa di pakai di RC car rock crawler gtu ngga ya

[@roscoechannel]

nggak yakin gan. ga pernah megang RC

[@rufnek3124]

Nostalgia, hyper dash the only motor that I can afford .

[@melvinsantiago6227]

What's the best single shaft motor you been used? And what gear ratio is very good to use?

[@roscoechannel]

For me, Super 2. Easy to be used. I used 4:1 gear ratio. Not using S2 anymore tho. I'm more into double shaft machine. 😁

[@melvinsantiago6227]

@@roscoechannel ma chassis and machdash or hyperdash 3?

[@roscoechannel]

@@melvinsantiago6227 melvin santiago pro series don't have hyper dash 3. They only got Hyper Dash Pro and Mach Dash Pro for high level motor. I found some people using HD3 (Hyper Dash 3 for single shaft) to mention HDP (HD Pro). It's confusing 😁 Anyway, can use both. Depends on the layout and your machine setup.

[@sinton4298]

bikin video test high speed plasma dash dong, penasaran banget sama kecepatan maksimalnya plasma dash. Thanks

[@cpkrobin]

Nice explanation

[@roscoechannel]

thanks!

[@joshuaedano3263]

Recommendation for beginner sir tnx

[@roscoechannel]

My recommendation is to watch my videos from the beginning up to the last video. There are many stuff to learn from those videos.

[@f50koenigg]

So which is better torque wise between power dash and ultra dash?

[@roscoechannel]

I guess both got similar torque (based on Tamiya magazine motor chart) but Ultra got more speed.

[@OG_Aries]

Which is better hyper dash or rev tune 2

[@hidrophonichercules1340]

This used Xolused tool or equipment those coil? Why car tionused tray ons~ ?

[@hildaqoimah6208]

Om roscoe mau tanya dong kalo motor ataau dinamo disimpan bertahun tahun ga di pake kira kira akan mengurangi performa gak ya, thanks

[@roscoechannel]

Biasa akan turun sih kalo udah lama bgt.

[@is-johan1518]

Can we use this motor in RC car

[@roscoechannel]

I'm not sure

[@greikcell1845]

Sir im using mach dash motor and i use small diameter wheel set, if i may ask what gear ratio is the for me

[@kerryrealin]

Torque tune 2 motor is good for circuit race

[@Azrel00]

Awesome video man!

[@roscoechannel]

Thanks!

[@DTsinaf]

Roscoe nice video, thank you. I need this type of 3v motors for Thomas and friends "Trackmaster" trains. They need torque but not too many speed to stay on tracks. Which motor of these do you propose? Thanks again

[@roscoechannel]

I guess torque tuned will do the job

[@DTsinaf]

@@roscoechannel thanks!! I bought the Torque Tuned 2 and indeed their reported torque is very good on uphills. But are not good for trains, because they increase the speed too much, causing most trains to derail at the bends.

[@ichibansama5867]

sir good day, what is the best motor for tuned class? and also for pro stock racing and speedtech racing? speedtech racing I usually use Power dash motor while on Prostock racing I usually use Hyper dash 3.

[@roscoechannel]

I usually use Torque & Atomic Tuned

[@johnedelariola5763]

I need your advice on what can be done to avoid pinion gears loose/slipping on the motor especially on the double shaft motors. Other than replacing the pinion gear is there any other solution besides glue?

[@roscoechannel]

The answer is in this video: kzbin.info/www/bejne/jHa4hIqZht6SoLc

[@eronjiofernandez9257]

What is better atomic tuned 2 double shaft or hyper dash 3 single shaft what is better?pls

[@roscoechannel]

Watch this video: kzbin.info/www/bejne/hX7RgWeEqKiCprc

[@NaniJapaneseForWhat]

can i use any of the motors in an rc car?

[@hendrafransiskus7799]

Om mau tanya. Klo dinamonya uda terlanjur kepakai berkali2 trus baru mau break in, boleh ga? Ada pengaruh ga?

[@choupaksml5604]

What is best motor for razorback?

[@roscoechannel]

it depends on the track layout and your car setup

[@gabealvaran6601]

Do you have to break in every brand new motor you buy ? I’m new

[@roscoechannel]

Yes.

[@rooneykt9]

Great video! Concepts are Simple and clear. Maybe next time you can make a video about how to break in those motors.

[@roscoechannel]

Thank u! Yes bro, stay tuned! I'm preparing the new break in video 👍

[@roscoechannel]

Here you go bro: kzbin.info/www/bejne/hn7MeHSgiN54fdU

[@securetoastcheese3959]

Did you ever try your plasma dash motor on the track? And what's your opinion about plasma? Is that worth?

[@roscoechannel]

I've never used that one, but I've used Plasma Dash a long time ago. I was a beginner back then so I didn't know much about the characteristic. But I think you don't need to buy it. The other motor such as Sprint, Hyper and Power is already enough to give your car a blistering speed.

[@securetoastcheese3959]

Ouhhh.... I see.... So, every motors will be used from the condition right... Thx before :D

[@roscoechannel]

Yes. Most of the layout around my place are kind of technical. So using Ultra Dash or Plasma Dash will increase the chance of the car getting coursed out due to overspeed. 😫

[@securetoastcheese3959]

Oh, hey... I suddenly remember... Can you make more basics video? I think, mini4wd will be my new hobby now.. 😅

[@roscoechannel]

Of course bro. I'll make them periodically. Most of my builds are quite simple and can be followed easily. Welcome to Mini 4WD world bro! Good luck!

[@kettengg5552]

Amazing video! I've suscribed :D

[@garylcj]

Does anyone know how does the motor reach its lifespan or becomes "broken"? Is there away to revive dead motors?

[@roscoechannel]

Either it's totally dead or the performance become really bad. The motot brush got broken.

[@garylcj]

Roscoe Channel thanks for the reply. I stopped this hobby many years back but recently picked it back up as I found my old box of tamiyas. Tried running my motor but seems to run slower than I remembered. Any advice on what to check before I go purchase a new one? Thanks!

[@roscoechannel]

If it's too old then u just need to buy a new one. It's a lot more easier. I don't have any idea how to repair a broken motor.

[@garylcj]

Roscoe Channel okay thanks for your advice :)

[@emti29]

what classification is plasma dash?

[@roscoechannel]

can't be used in official Mini 4WD races

[@rrachata]

Good content as always bro.

[@roscoechannel]

Thanks bro!

[@abdullakc]

A question: is the old is motors faster than newer version ? Am talking sprint dash, power dash and ultra?

[@roscoechannel]

Haven't compared them. But Ultra is definitely on a different category than sprint and power. Ultra is not allowed in official Tamiya Mini 4WD races in Japan.

[@f50koenigg]

Man I used to have a plasma dash motor back in 2000 and someone had managed to steal it while I was in a local event.

[@StryXi]

Can i use this motor in a cheap rc car that has this type of motor? i need help Edit:Like the back motor is the rev motor and the front motor is the torque motor

[@roscoechannel]

I don't think RC car use the same type of motor

[@StryXi]

@@roscoechannel owh ok

[@julianpermana1882]

Kebetulan liat feed ini jadi mau nanya, kalau turbo dash, touch dash, dan zen tuned masing2 masuk kategori apa ya? Btw saya sudah nyoba beda akselerasi antara torque tuned dan rev tuned. Rev tuned akselerasinya kecil banget jadi pas start lambat. Kalau torque tuned torsinya besar, kadang bannya spin atau slip di tempat pas start.

[@roscoechannel]

Nggak punya info soal motor2 itu semua bro

[@snap_fit8686]

Since mach dash is not in this video and i just watch your recent video.. are the mach dash iquivalent to hyper dash?

[@roscoechannel]

I've mentioned about Mach Dash Pro ini the video 😁

[@snap_fit8686]

@@roscoechannel oh right.. in the double shaft category near the end.

[@jaydedelyuenduroairsoft4x448]

Can this motor run on 4.2v to 5v??

[@roscoechannel]

I guess so

[@mycomputer8707]

hyper dash 3 dibanding hyper dash pro mana yang lebih bagus kecepatannya? karena kalo aku lihat rpm dan torsinya sama

[@roscoechannel]

Tonton ini dulu aja bro: kzbin.info/www/bejne/hX7RgWeEqKiCprc

[@nitatatha3458]

Kalo untuk crush gear recommended yang mana om?

[@roscoechannel]

Wah saya nggak main crush gear nih. Nggak bisa jawab gan.

[@minovskyparticles1834]

i have an ultradaah motor, it relatively new but it pulsates after i soak it in silicone oil and sewing machine oil.. does cleaning it solves the problem?

[@roscoechannel]

I'm not sure about that. U shouldn't soak it with sewing machine oil to begin with, it'll mess up ur motor. U gotta use a contact cleaner + lubricant. Imo.

[@khairul_kasmadi]

Tq for the info. 👍

[@keithbelano6042]

Bro can i break in my torque tuned 2 motor? All motor can be break in?

[@roscoechannel]

Yes

[@shinji5217]

Your picture is hilarious lmao

[@perjalanansolo]

bikin perbandingan rpmnya gan dari masing masing dinamonya, single shaft & doble shaft

[@mli7822]

I just recently bought a pro-series kit, do you know what are the competition categories I can join in and perhaps explain each of the categories?

[@roscoechannel]

It depends on the local rules around your place

[@zaLkran]

What does the term break-in actually meant for a motor?

[@roscoechannel]

kzbin.info/www/bejne/jHa4hIqZht6SoLc watch this one bro 👍🏼

[@leonardpascual8211]

which is better, single shaft or double shaft

[@roscoechannel]

I prefer double shaft

[@leonardpascual8211]

@@roscoechannel thank you very much for the quick response. so my choice is right also. so MS chassis is fine, just ordered one MS chassis kit

[@Blaklyon0]

This info was useful. Thank you!

[@kreiyt28]

Hello! I am wondering what motor should I swap for an RC drift car that is 4wd. I would like to know what is better, Power-Dash or Ultra-Dash? I'm thinking of buying the Power-Dash for good acceleration. Also, I've read somewhere that the Ultra-Dash motor isn't good for long term use? It would be really helpful to know. Thank you!

[@roscoechannel]

Hello. I've never played RC before, so I don't know which one is better. I guess you should try power dash. Ultra dash is on a whole different level due to its high rpm specs (this motor also can't be used on official mini 4wd races). About ultra dash lifespan, I guess it depends on the frequency and the duration of the motor usage. I hope this info can answer your question. Thanks for coming to my channel.

[@kreiyt28]

@@roscoechannel Thank you so much! This helps A LOT! I also want to know if the Power-Dash motor is power hungry? What kind of batteries do you use for it? What is the Voltage and Milliamp of the battery?

[@roscoechannel]

@@kreiyt28 I didn't notice a significant difference about battery consumption while using Power Dash or other motors. Probably because most of the layout were not that long. I've never done any research for it so I can't answer your question. I usually use neo champ batteries for my Mini 4WD machines. It's listed as 1.2V 900mah AA type battery, but the actual voltage can go up to 1.4-1.5V based on the reading on the charger.

[@eronjiofernandez9257]

What is better rev tuned 2 double shaft or hyper dash 3 single shaft, please answer personaly please

[@mli7822]

If im not mistaken double shafts are much powerful than single shafts plus if you're joining a competition you cannot fight single shafts with double shafts and vice-versa. You have to understand what category you will be joining in and build your tamiya around it :)

[@roscoechannel]

Wrong. Single shaft can also beat double shaft. That's why in Japan Cup or any race in Japan doesn't divide the class between single shaft and double shaft. But, it's correct that double shaft motor got more torque.

[@roscoechannel]

Tuned motors and dash motors are on different class

[@denabdullah2678]

Im a newbie sir. Can yoi give any idea what to biy firstm preferably for suoerstock category? Thanks. And what setup?

[@roscoechannel]

I never play superstock category, so I can't say anything about it.

[@amoloccoloma9763]

whats the difference between hyperdash pro and a japan cup 2018 hyperdash pro..?

[@roscoechannel]

No data regarding the exact difference. Based on some racers testimonials, the 2018 carbon is a bit hard compared to the regular one. It can produce great performance but the durability is kinda bad. I personally don't like using the 2018 or the other yearly HDP. I prefer the regular HDP. But u can check my HDP break in video to see how it runs.

[@roscoechannel]

I mean the carbon brush

[@amoloccoloma9763]

oh ok sir thanks for the info..anyway great vids bout ms chassis..ms user here :)

[@roscoechannel]

Thank u!

[@catthecommentbothunter6890]

I have one of that and they are very fast than a brushless dc motor and my Tamiya electric motor has a glass cover

[@TOKICHI.MIKUNI]

I've a problems with my motor mas, i had plasma dash well in the beginning its so smooth until my car was hit a wall. Afte that my motor were going backwards. Did you know the problems ? And how to solved it ?. Thank you for your video its so inspiring !!

[@roscoechannel]

Sorry, I don't have much experience with Plasma. I only used it once. So I can't say anything about the problem.

[@TOKICHI.MIKUNI]

@@roscoechannel thank you for replying, but did you know about that stuff ?? I mean the problem that i get. I want to trial some method but i dont know how to

[@roscoechannel]

Never experience that stuff and know nothing about it. I'm more into double shaft machine coz when I returned to this hobby, I used MA and then started from there. I'm really bad with single shaft stuff. Sorry.

[@coicoitanayan6246]

Very informative vid sir. Can i ask what's the best gear ratio and wheel size (mach dash pro) for speed tech race track? Thanks Sir and more power. 😁

[@roscoechannel]

There's no best combination. U need to match it with the layout. But, these days I'm using 24mm tires.

[@coicoitanayan6246]

@@roscoechannel which do you prefer?yellow gear or the smaller one? Sorry. Newbie here.😁

[@roscoechannel]

I prefer 3.5:1. If u have a great transmission, the acceleration can be similar to 3.7:1

[@coicoitanayan6246]

@@roscoechannel thank you sir. More power. :)

[@satsugailanima]

Really love this video, bcs I personally want to (re) start this hobby 🙌 Tp masukan aja mas, tolong lain kali di kasih sub bhs Indonesia, atau di balik make sub English ngomongnya make bhs Indo. Btw I'm your new subs! 💪

[@roscoechannel]

Sudah ada sub bhs Indonesia nya gan. Klik tombol CC (closed caption) lalu pilih Indonesia. 👍 Thank u gan.

[@leironrescordado4271]

What kind of batteries do you use? Thank You.

[@roscoechannel]

Either Neo Champ or Fujitsu 1000mah

[@caalcb7]

Ultra dash kenapa ga bisa dipake official race bang?

[@roscoechannel]

Memang peraturannya

[@datukmalky9233]

My rc boat also using kind of Motors (130 motor).but i think its standard motor.any reference what kind of 130motor for increase more speed?is plasma/ultra dash are good enough?thanks

[@roscoechannel]

I think that'll be too fast. Try using Power Dash or Sprint Dash first

[@datukmalky9233]

@@roscoechannel ahh okey,thanks for advice sir 🙏

[@mini4wdhobby765]

bro kenapa plasma dash jarang ada yg mau pakai ..bikin video original speed pakai plasma dash seperti nya menarik.

[@roscoechannel]

Ga punya mobil speed gan. Gak banyak pengalaman juga dengan plasma. Pernah pake 1-2x aja nih.

[@damefallentenshi]

Beda hyper dash cup edition (ac, j - cup) sama yang biasa apa bang

[@roscoechannel]

Ada perbedaan sepertinya

[@jacob_n_r_z8755]

I have a touch dash. Where does that put in the category?

[@roscoechannel]

I guess it's for playing at home for kids. Because it has an automatic off mechanism to avoid potential dangerous condition for kids such as heat build up on the motor when it the car got stuck

[@jacob_n_r_z8755]

@@roscoechannel so it's not for compitition?

[@roscoechannel]

@@jacob_n_r_z8755 I guess so. But I dunno about old generation motor. So please CMIIW. Thanks for watching.

[@Kiko-oj2jj]

Which is faster in the double shaft motor

[@mli7822]

Mach-dash pro is the fastest in double shaft

[@felmarebrole8972]

Is the torque tuned 2 pro any good ??

[@roscoechannel]

Yes bro. Take a look at this video: kzbin.info/www/bejne/nITchZiip6iKpa8

[@felmarebrole8972]

Roscoe Channel thanks sir.. it helped a lot.. i thought torque 2 is a waste .... Its pretty cool...

[@roscoechannel]

Yes, for a technical layout in Tuned class, Torque Tuned is definitely my favorite motor. You just need to break in the motor in the right way.

[@VitoChad]

Om lu umur berapa dan sejak kapan lu hobby tamiya

[@aryokmalmsteeand7185]

great review.. 👍👍

[@roscoechannel]

Thank u

[@TurboYonki]

Nice video! How do you do the running-in? Thank you in advance.

[@roscoechannel]

You can find my motor break in video in the playlist. 👍

[@TurboYonki]

@@roscoechannel I haven't seen it. Thank you :)

[@markusvianugrah3492]

Mas, klo torque tuned 1 sm yg versi dangun apa bedanya?

[@roscoechannel]

Ga pernah bandingin om 😁

[@markusvianugrah3492]

@@roscoechannel Baiklah wkwk.

[@13_iwayangennawastrawancer62]

bang saya ga bisa bahasa Inggris sir, can you speak Indonesian, I can't speak English

[@roscoechannel]

ada subtitlenya gan

[@13_iwayangennawastrawancer62]

Ya dah tau biar di notih aja bang wkwkwkwkwk

[@norwinsareno4137]

Are you selling some pre build or Ready to Race tamiya's?

[@roscoechannel]

Back then - Yes, but I'm not taking any order no more.

[@norwinsareno4137]

Owww sad LOL. Or atleast make a give away if you reach 10K sub haha.

[@roscoechannel]

Hopefully bro. But, shipping fee to outside Indonesia is really expensive. That's one of the reason why overseas customers cancelled their orders and I totally understand it. I agree that the shipping fee is quite expensive. 😅

[@Soul.29]

Hey bro i need ur personal answer pls, double shaft is better than single shaft? So i know what i buy. Thank you so much bro

[@roscoechannel]

I prefer double shaft. If you're beginner, try using MA since it's really simple. Watch my MA videos in this channel. There are lots of them. 👌

[@juangabrielsantos9154]

What is the fastest 2 shaft motor ?

[@roscoechannel]

kzbin.info/www/bejne/hX7RgWeEqKiCprc

[@khoskhuualtankhuyag8315]

Mach dash pro

[@remullajanzander5361]

Thanks

[@munchgaming4589]

I use power dash at pro stock races

[@roscoechannel]

For real?! 😲

[@alvinsibunga9145]

Good bye chassis

[@munchgaming4589]

Roscoe Channel yup

[@munchgaming4589]

Roscoe Channel but in the philipines

[@bryan-x5u]

Ty so much

[@anandaahmadantoni3976]

Dipasang di Chassis LV auldey 4wd bisa nggk

[@roscoechannel]

Nggak pernah coba ke auldey gan

[@channelkulo9226]

jos tenan iki,,,

[@buboypalaboy3043]

what about the Jet Dash motor???

[@roscoechannel]

I never touch Jet Dash. Not even once. Got no info about it.

[@julianpermana1882]

@roscoe channel @john ong in my car, jet dash can achieve 48 km/h and ultra dash is about 50 km/h. Jet dash has higher torque than ultra dash, but they perform similarly. Jet dash is also banned in official races because it is a discontinued item. I think jet dash is categorized as a higher version of power dash.

[@SisonYoutube]

Hey Good day Roscoe, Can you make a video tutorial of the basic/standard rules of the Tamiya Mini 4wd races? today official races only allows All Tamiya parts right? But i dont know the specification allowed, like tire width, height etc. I wanna have a hobby after the pandemic so if you can help me about the rules so i can participate and play here in the Philippines i'll be very happy. 😁 Thank you

[@roscoechannel]

hello. thanks for your suggestion. Regarding the rules & regulations, you can check it out at Tamiya Mini 4WD official website. There are so many points from the rules so I guess it's kinda hard to make a tutorial video about the R&R.

[@SisonYoutube]

@@roscoechannel thanks sir. Im gonna check it out. Im already a subscriber 😁✌🏻

[@bayusupriyanto89]

6:15 setelah rusak dibuang motornya? sayang padahal cuma bostelnya saja yang habis

[@roscoechannel]

Iya. Peraturan resmi Tamiya Mini 4WD nggak mengijinkan bongkar2 motor lalu digunakan.

[@josemartinalmacha4771]

So its true the motor have diffirent characteristic? I thought it just marketing.

[@roscoechannel]

Yes. But I think u should test them urself, that way u can find the difference. 👌

[@josephmaganan7751]

Pahingi nga po

[@madz6n6]

have u try plasma dash on track, i think is very rare see someone use plasma dash on race?

[@roscoechannel]

I think I only tried that motor once when I just got back to this hobby. I don't think that motor is needed. The speed of the Sprint, Hyper and Power Dash motor are more than enough.

[@cjmpaja]

Plasma dash is the most powerful motor tamiya ever made for mini 4wd. It is banned in tamiya sanctioned races. But you can still use it in private races...

[@lipiumayy]

Nanti pake bahasa Indonesia ya om

[@roscoechannel]

Ok gan, nanti terjemahannya menyusul ya

[@roscoechannel]

Subtitle bahasa Indonesia sudah tersedia ya gan. Selamat menikmati.

[@Colektibols]

where the Jet dash and Ultra Dash motor?

[@roscoechannel]

don't have them 😅

[@Kiko-oj2jj]

I think you're wrong at the ultra dash they use ultra dash at all competitions even championship

[@roscoechannel]

You should read Tamiya Mini 4WD Official rules. 👍

[@Kiko-oj2jj]

@@roscoechannel i readed it already but is says its allowed

[@roscoechannel]

It depends on the race event. But Jcup, GP, Spring, Summer, Autumn, World Challenge, Asia challenge none of them allow Ultra Dash motor to be used. If you're talking about private races, then of course it's allowed. 😄

[@Kiko-oj2jj]

@@roscoechannel yeah I'm talking about that hehe😂😂

[@siffasandisasmita7484]

hah masa si, hyperdash dan power dash torsinya bkannya sama ? yng membedakan powerdash rpmnya lebih tinggi

[@roscoechannel]

Boleh lihat di majalah Tamiya gan. Di situ ada grafik + keterangan lengkapnya seperti yang saya tampilkan di video dalam bahasa jepang. Hanya saja, keterangannya saya jelaskan dalam bentuk verbal di video ini (kira-kira demikian). Monggo dicek gan.

[@siffasandisasmita7484]

+Roscoe Channel berarti rpmnya gede hyper dari pada power dash ?

[@roscoechannel]

Kalau secara teorinya sih sesuai grafiknya -Top speed: Sprint Dash -Balanced speed & power: Hyper Dash -Top power: Power Dash Besar rpm tergantung juga dari cara break in motor. Tapi karakteristik dasarnya demikian.

[@ぱんだぱんだ-g6x]

ロスコNICE！

[@roscoechannel]

ありがとうございました！私はこの情報が初心者のレーサーによって使用されることを願っています。😇

[@paulvincentarriesgado3323]

WHERE IS JET DASH???

[@LenBi999]

Yeah I was wondering that myself...

[@roscoechannel]

I don't have it

[@johnkamantigue9893]

Yey now i know thanks and also im first again XD

[@anggasuryo9591]

i thought you were from japan

[@roscoechannel]

Nope. 100% Indonesia hehe

[@agbecexzwfsh09groupultraco58]

Vertex

[@dhafakafka]

bang,daripada lu pakek bahasa inggris,subtitelnya indo,mending subtitelnya yg inggris,lo pakek bahasa indo,negara kita harus di utamakan,mana rasa nasionalismemu

[@roscoechannel]

Siap kapiten!

[@agbecexzwfsh09groupultraco58]

Te c p e rec en

[@fabioassirelli2825]

i have a question: how many pinions i should use on a power dash and on a hyper dash 3? i think 8 number is fine... thanks!!

[@janzanderremulla8622]

Thanks