Mini AtmoMotor V2 - For the Free Collection of Atmospheric Electricity

[@milkrecu]

Your ingenuity and thoughtful engineering is inspiring. Thank you

[@Miley_00]

Wow I was just thinking about you yesterday! Glad to see you are still working on your projects! I love my backpack solar panel I bought from you.

[@lasersaber]

That is awesome!

[@hippie-io7225]

@@lasersaber That thought stream must be in the ether. Wondering where and how you are,.... and thinking of Atmo!

[@peterlang777]

make a graphene hematene water powered battery!!!!

[@Thru_Mind_I]

How can you charge battery with this? Is it hooked up to inverter like solar panels?

[@kbcovingtonsr]

Backpack solar panel? Lemme see.

[@Infinion]

KZbin has not been sending me any of your new videos on my feed for the past year....damn. Welcome back, good to see you experimenting again!

[@il51diablo]

wow! You started with this in 2013! It is abused ! I remember it like it was yesterday...

[@electronicsNmore]

You did a really great job making that motor. Very cool.

[@lasersaber]

Thank you!

[@matthewh4684]

Bloody incredible. I've been doing experiments with grounded magnets in repulsion but this.. is something

[@hurdlerdude1337]

Been out building, feeling and thinking. Welcome back Lasbersaber!

[@danielsimpkins9662]

We need you back posting regularly! It's April 1'st and there's no Dr. Lirpa Sloof video! We NEED Dr. Lirpa Sloof videos!

[@dans-designs]

I love it!!! I think the best way to retain the RPM but also generate power is to attach the magnets directly to the existing external rotor (near the needle) and position coreless coils around them.. you could even combine axial and radial magnets and coils to almost quadruple the output!

[@chehystpewpur4754]

what you need is a flywheel not a draw. flywheel weight is proven tech and yes it takes more to start it but once its going it doesnt wanna stop.

[@Purana7]

Ive watched you since less than 10k subscribers. All i can say is people like you are the reason why there is still hope of people realising how sick and primitive our energy system is. Could you please do some work on quartz? And how a quartz granite box can create voltage by internal pressure (like the sarcophagus found under great pyramids). The pyramids where a combination of many forces like running water, piezoelectricity and atmospheric electricity and mm. Its only a matter of time before people realize that spinning a generator is not the only way to harness electricity!

[@joshuameldru4004]

So glad to see more of your fantastic work. Your channel is one of the reasons I love to look at KZbin! Thank you sir

[@drbahb1]

Happy to see you back. Love the new logo.

[@johnhosky2931]

Good to see ya posting again!

[@lasersaber]

More to come!

[@danmurphy5660]

So good to see you back man

[@joshua2812]

Wow. This is so cool. As said by many of us follower's, glad to see you back at it. Love your videos. Keep them coming.

[@NandR]

Man I love these motors. I’m amazed at how much energy they are able to harness. Would love to it on the sky wire.

[@trueherbsman]

keep that spirit flowing man! you're an atmospheric master (Y)

[@maherph5489]

Long time glad you are back

[@lasersaber]

Glad to be back.

[@SSingh-nr8qz]

This is one of the coolest things ever! I would love to see how well this scales and have you ever thought of seeing the effects of an improved collector array to pump into the AtmoMotor? This project seems to be a 2 part system rather than just the motor itself but finding a way collect energy from the atmosphere as well.

[@power-max]

Can you measure the efficiency of the motor? Or the power output? And power input? Might involve some high voltage probes, the highest impedance ones you can get, a regulated HVDC power supply, and microcurrent meter. Not sure of a good way to measure output power with any sort of accuracy though. The idea of a motor that uses electric fields instead of magnetic fields is fascinating as well. Can you turn the shaft of it and have the motor generate high voltage? It looks similar in construction to a Wilmshurst machine.

[@chelsona2574]

im so happy to see you back on here!!!!

[@codemontana]

This man’s a treasure, great content much appreciated

[@chance1986]

What an incredible demo! And thanks so much for posting the details. I love your channel. Wish you posted more content. Looking forward to the aerial tests.

[@neoterra7072]

Very Cool! Looking forward to seeing your larger motors.

[@KangJangkrik]

Will this thing extract power from atmosphere with kite? How many watts? I'm curious

[@aseriousinquiry8425]

At the end, I was reminded of Emperor Palpatine.

[@cryptoalchemist369]

Hey brother! You are about as awesome as they come! Your work is a major inspiration in my own. I am currently doing a video series with the Hutchinsons and the Crystal battery build. We'd love to have you on a video call together with them sometime if possible. They love your work, and it be an honor and asset to have your experience with the Crystal battery builds over the years. also I absolutely am fascinated with atmospheric electricity, and you are literally leading the way! I'm going to get the design to my friends with 3d printers! much love and respect

[@overunityinventor]

if instead of running load directly from static electricity, you step up using a transformer, it will make bigger load run and current draw from atmosphere will increase, means for us this step up will be free

[@colleenforrest7936]

Hey, you're back! Great looking at atmo motor!

[@spark3167]

You're getting there. keep it up!

[@lasersaber]

Thanks, will do!

[@user-wy3xe2tt3y]

02:37 👍🧐That reminds me of Spock aligning the dilithium crystals on the Starship Enterprise... “ I am and shall always be your friend LaserSaber”

[@ShafaqIftikhar-pw9ld]

Absolutely beautiful compilation!!!!!!

[@Isimplydoes]

Your arm hair standing up is hilarious

[@radwizard]

Far out! Hamilton Morris pointed this channel from his patreon. I've you subbed for years. :)

[@SINANOZYOLDAS]

I am ready to carry out the electricity generation project with angular resonance together with investors who agree to make an official protocol. I have worked for 15 years for this project. After the official signatures are signed, everything will be done openly.

[@joelsoncdma]

Energy is amazing...and beautifull efect

[@bringer-of-change]

Definitely awesome man. Wireless power is the bees knees

[@BillHallProductions]

Question. If you turn a corna motor by does it work as a static genartor in the same way a magnet motor works?

[@QuantumLightTV]

As always, a great video. I love your commitment to experimentation.

[@jachmantis]

Love it, wouldnt it be something to run some small lights permanently off one of these? Keep being awesome!

[@jcwdenton]

Your channel is the best

[@ConorFenlon]

Great to see a video from you again. While I'm delighted to see you making videos, I do have to ask about some previous content of yours. Atmospheric motors and Crystal cells and very cool and interesting, but their practicability is a little lacking when compared with say, battery Banks in parallel with super capacitor banks, which would be EXTREMELY useful when used in conjunction with renewable energy like solar PV. Will you be exploring systems like these again at any point in the future? Thanks for reading my comment. I hope you and yours are all keeping well these days.

[@ricohhobrasil9591]

Very, veery cool, hug from Brazil !!

[@producernemo7035]

holy shit dude, youre like one of the coolest dudes alive. like for real. you are making magic, you have super powers, almost a sith lord at the end ahaha

[@sebastianharrison6118]

This is amazing keep up the good work

[@prioritytree]

Wow very inspiring. Right on !

[@TheScottsawesomeart]

iv bn watching you for very long time , are your crystal battery's still going strong?

[@masterxofficiel]

Wonderful innovation 🤩❤️

[@TheSonichedgehog8]

Holy shit, a laser saber video owo

[@buck19]

And this is how flying saucers work

[@BenjaminSteber]

Years and years ago I saw a discovery channel special that claimed to have built an atmospheric electricity harvester engine into a mail truck, along with storage. They tried to race it and first the engine broke the drive key to the wheel. The second try they shredded the drive belt. Not sure if the truck was real or a sham but I’d be glad to find out it was true.

[@aseriousinquiry8425]

Should you watch out for ozone production from the corona?

[@TheJSB007]

Amazing job, KZbin keeping the updates away as usual, just found you after a very long time. I dreamt last night of seeing something similar to your device, it was a small hydrogen generator that fits underneath the bonnet of your car, maybe link the two together? signs coming in now, love it.

[@fookingsog]

Super Cool!!! How much Ozone production are you experiencing with that amount of coronal discharge???🤔

[@lasersaber]

I have no idea, but I can smell it.

[@SaltGrains_Fready]

@@lasersaber every molecule of O3 at this atmospheric pressure level turns into 3 o2's in about 20 seconds. That's safe in your small environment with fresh oxygen and disinfectant power. On the other hand, if you were discharging huge capacitors with large arcs continuously, that would be totally different since the o3 would then saturate the space around you faster than it can break down to 3 o2's for each molecule. Also high moisture levels can interact with it and create a chlorine odor in that situation. People get this little HV electrical ozone confused with the toxic Chemical ozone created by noxious gas pollution & smog at higher altitudes which is completely different and poisonous.

[@eleos5]

The future is bright

[@paulmurphy3838]

Oh, man, this is amazing, being a follower of all things over-unity (although your device probably doesn't fall into that catergory) I am going to download your 3D printer files and get building. Just three things 1) Do I have to sponsor you through patreon 2) Being in suburbia how high does the antenna need to be to get good results 3) It appears to be high voltage with low current, but once the natural resistance of the body is overcome I think this thing could kill you--is that correct ? )

[@sataysenoi]

Aeroplane using free energy without fuel on air.. Thanks for the information

[@imaginarypoint]

at about 1:50 into the vid. On the table. If you add a second motor#2... will the speed on motor#1 decrease? Or will it stay the same.. motor#1 and motor#2.

[@lukehanlon9965]

Absolutely Awesome! Thanks👍

[@damedesmontagnes]

So how do you power devices or charge batteries with this? Do you have a video explaining that? Thanks.

[@piconano]

How have you been? So nice to see you back at it again. This new design blows me away! It looks amazing. Well done. Have you ever verified Tesla's patent US685957A? When I remodeled my last house, I wanted to cover the outside new wall with overlapping aluminum foil over the house wrap, and run a wire to the basement for experimentation, before the vinyl guys showed up to install the vertical 1x3 nailers, before installing the vinyl siding. Sadly I didn't do it and regret it to this day. I was exhausted as I did all the framing and remodeling. I wanted to test Tesla's fig-1 circuit. I think your motor+generator would run pretty nice on such a system. I can't wait to see your next video.

[@lasersaber]

Doing well. I am familiar with Tesla's US685957A patent. I have not really tried to replicate it yet. Hopefully I will get the opportunity at some point in the future.

[@piconano]

@@lasersaber ♥

[@DavidHey-vd5wn]

Was this idea not being persued by Nikola Tesla with his tower??

[@th3luciousfil3s98]

IMO yes

[@jimmywhitlow2012]

Of course. He also made a car that could run on atmospheric energy.

[@iimppy]

Can you try to wrap copper wire around the motor to collect electricity to a point for collection?

[@buteomont]

This is excellent work. You seem to have optimized it to a very high degree. Have you experimented with different aerial collection designs? I also noticed that your little stinkbug buddy was enjoying the ride at 1:27 lol. You must live in the South; those guys are everywhere!

[@redesign3dp]

That's an awesome build brother! I understand the needle collector, have you tried Tesla's RE collector from his patent? An insulated shiny metal plate connected to a high quality mica capacitor with an earth ground. It might be worth a try. That ending was epic..

[@chrispotts72]

Are you hoping to scale up? If you get enough altitude on your aerial it should be able to power some good small electronics!

[@FreeKanal]

U can put blades to the freezer so u will put the plastic caps easier

[@2bertoldo]

is the bug on the rotor stuck? how many gravities did it have to endure?

[@ExSparticus]

Have you used a capacitor like a Leyden Jar to build up the charge?

[@the_natrix9959]

Could you add more rotational weight? If the aluminium/plastic cylinder were heavier would it still function?

[@ollehogberg4368]

Can it drive the hand crank generator in your previous video?

[@Ewr42]

It'd be interesting to make use of atmospheric positrons on clouds on storms, or lighting

[@hi-tech-guy-1823]

You should Get a few Laser/photocopier toner Cartridges / Drum for the Amber on the Drum Rollers (photoconductor drums) You can then Deep store Static Current within the Amber Surface as it rotates and take power From the surface as it rotates (A Rotary Capacitor / Battery) I be Tempted to use joule thief & joule Ringer Network (more than one) with a Isolated Transformer / ferrite rod antenna & Transformer and Grounded Core To Try and convert Static Electricity ( IC Component & Microchip killing Electricity ) into more Normal Electricity ( IC & Micro chip Component Safe Electricity) For Super caps & lithium-titanium-oxide Battery Cells Charging and drive IC And Microchip semiconductors We ues Cheap ESP 32 ESP 8266 MCU + Raspberry Pi 4 There cheap to Replace if HV Static kills them and Try and Get them Safely working on Converted Electricity Along with a Few Cob Pannal LEDs (Also Static sensitive)

[@buteomont]

This is amazing! Great job on tweaking the efficiency of this motor! How does it affect local radio reception though?

[@cboy-ou2hr]

Welcome back

[@afsdsasasf]

Can u attach this to a weather ballon to harvest electrons from clouds before it becomes thunder clouds?

[@icebluscorpion]

With this insane torque and RPM you could turn a N-Machine AkA Homopol generator and connect the Atmospheric motor electrically in series with the N-Machine such that the N-Machine gets electrostatically charged and every time it discharges a huge current from the N-Machine takes over

[@1015KillAtron]

does is smell like Ozone when you have the motor running?

[@GasGiantMoon]

Look Who's back ;)

[@edwardkamenar1493]

So I'm still trying to figure out how it works? Details please.

[@canuckcanuck3415]

hi my name is Chris edwards I talked with you a couple years ago , I would like to build the soln 2000 , could I get links to the build . or where to sign up to get one 😁

[@sonofman70x7]

That poor bug went for a dizzy ride at 01:31.

[@christianpaulroldan4010]

Thats amazing

[@SaltGrains_Fready]

U have produced A nicely developed and highly refined ionic propulsion motor. Remember to mention it's wireless HVDC Not HVAC like with oscillating Tesla coils and so on, where the voltage collapses and is gone as soon as it's switched off. It's a negative charge you have. What about stray static charge and ion's collecting on all the appliances and lights and starting arc overs into the line voltage in the room..? Isolation is Essential. That is something to consider once you have over 200KV in static charge. It can either blow fuses, blow out appliances and electronics, or start fires in the walls. I worked in a half million volt cage back in the early 70's when electronic controls of HV power supplies were just being developed, doing testing and burn in, inside Grounded Metal Cages. Even the volt meters and measurement apparatus had to be properly grounded to prevent blowout. Some Points to consider. Also use NE-2's as indicators on short wires to show polarity. Only once pole lights up with the negative charge.

[@alexandermcalpine]

Awesome!

[@danigkittystarfly]

Youre inspirational man

[@dhamapaudyal9559]

It look amazing

[@hominidaetheodosia]

What kind of torque is this motor capable of? Is this Moto capable of doing much work? What are your feelings on there being a third type of electricity?

[@dogodogo5891]

hi do you thinj corona motor gave us higher potential at triggering lightning? i would like to doing some experiment regarding lightning bolt i knew safety measure

[@a-a-ronv9659]

can you do a mendicino motor in a vaccum chamber and your joule ringer circuit hooked with 555 output with high lumen led output on the solar panels would appreciate it.... love the channel as well!!!

[@jamesgray4037]

Is there a way of making a powerstation sized vandergraff and an Ariel big as a radio mast

[@elnatura2130]

have you measured the output power torque?

[@andrewharbit7449]

I wonder if you were to seal the motor and fill it with an inert gas, neon, xeon, argon. This should eliminate ozone generation while also being a dry atmosphere the static charges would induct better as I understand.

[@Allan_aka_RocKITEman]

​@lasersaber >>> 👍👍

[@AnDyity]

SciTubeHD showed that the drum can turn without having a metal contact sheet on it kind of like when you were making the fan move with your finger.

[@Maxim.Teleguz]

What about running it with a focused fresnel lense would that slow it down or speed it up? Would heat make it run better or worse.

[@lasersaber]

I have not tried that. I did testing with flame in the past. Check this out: kzbin.info/www/bejne/jIG4Xp6lYpaUnck

[@MusicSoundPlayer]

Very inspiring. Thanks!

[@jasonburguess]

I wonder if you could scale this up with steel pipe and fittings and a large rotor out of an old electric motor, big bearings etc.

[@mixpixmixable]

How can I get electrode?? What is name of electrode?.? I want to make corona motor :)

[@R2NOTU]

Hi what about battery charging or supercap charging.there using graphene strips on the top of the wire in the air really busts the input..why not a balloon ? They used to put radiom chloride on the aluminum balloons . If you could charge a battery. That would be so cool ..how do you avoid lightning strikes.?