Mini Cooper 2004 r50 rear glass jet not working fixed

Please consider a donation if you find my videos helpful.
paypal support link
www.paypal.com...
Mini Cooper 2004 r50 In this video we look at unblocking the dirt in the jet pipe which is not allowing for water to come out.
#mini #minicooper #bmw #minir50

[@tahlasworld7443]

So it’s 2023 and I just tried this after watching your video xx the originally Owner was a mechanic and told Me it was always broken I tried your way and noticed it wasn’t just blocked mine was rusted through the middle so I drilled into the main pipe (after removing) and now it works fine :) if anyone else had a rusty one just unscrew the wipe and the pull the whole metal peice out and dril through with a small drill peice :)

[@DaringBeefcake]

Fantastic well done 👍 and thanks for leaving a tip for others too.

[@HanzelFonferek]

Mine is just dribbling! I'm going to try this fix! Thanks

[@DaringBeefcake]

I hope it worked for you.

[@grumpytrucker2015]

Thank you, your video is very useful, off to try to unblock ours now.

[@DaringBeefcake]

Brilliant good luck 🤞

[@erlelarge4700]

Great video have the same problem, now know to keep going, thanks 👍.

[@DaringBeefcake]

Glad it helped

[@djjamminjimlawton6365]

Thank you. I have found this quite useful.

[@DaringBeefcake]

M glad to hear that 🙂

[@n.g.1577]

Thank you for the video. I'm trying to do the same exact thing, with even a bit longer allen key that fits in hole perfectly, but there's something extremely hard blocking the hole. I've hit it with a hammer, put it on a vise and hit it a bunch of times with different things, but the damn thing won't unclog/cease. Is there supposed to be something in there at all? I don't foresee anything that solid blocking this hole in this particular application. My freaking hands are aching from forcing this allen key in there, in every way possible, for over an hour.

[@DaringBeefcake]

Hi am sorry to hear you have been struggling so much, I do feel your pain as I also struggled and hit it with a hammer, but to be honest there is nothing there and that grit/dirt gets extremely hard. I would spray wd40 inside and if you can get a drill bit small enough size 2 or the size that fits and as long as possible, it will get through that grit and start bring the dirt out, I had to unblock other cars and the drill bit was the only way..you can push it down and turn it with some pliers doesn't have to be an electric drill...

[@staceyjizzaine]

This is really helpful. What was the length of the allen key you used?

[@DaringBeefcake]

It was about 20cm long, am glad it’s helpful 😃

[@kimschloms-madlener1491]

Spot on! Thank you!

[@DaringBeefcake]

You are so welcome

[@Cruxity_YT]

Mine squirts out when i remove the cover, but when i put it on it just dribbles, any advice?

[@DaringBeefcake]

Do you mean the little plastic cover that covers the jet ? If so you need to adjust the little jet and point it in the right direction.

[@Cruxity_YT]

@@DaringBeefcake what direction because it still just dribbles 😅

[@DaringBeefcake]

@@Cruxity_YT 😂 😂 ok, I have to ask, did you actually watch the video ? And unblocked as per directions?

[@Cruxity_YT]

@@DaringBeefcake yeah, when I take the plastic cover off it squirts out fine, but once it's on it just dribbles 😅😂

[@DaringBeefcake]

@@Cruxity_YT sounds like a mystery 😂 😂

[@ironmantooltime]

Is that the Trico motor?

[@DaringBeefcake]

yes i think so