Mini Koi Pond Drama 💥💥💥💥💥 Welcoming the winter in with a bang

[@koifishjohnny]

Johnny's Hawaiian Shirts 🤩🏝👉 www.koiaura.com Johnny's Wishlist 🧞 www.amazon.co.uk/hz/wishlist/ls/2XCFVHWZFRQZ6?ref_=wl_share Johnny's Johnny's Amazon Product Review Page ⭐⭐⭐⭐⭐ 🇬🇧 www.amazon.co.uk/shop/koifishjohnny?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfkoifishjohnny_P09BE5KA9HQGVA5DXJNX 🇺🇸 www.amazon.com/shop/koifishjohnny?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfkoifishjohnny_CHDK1X6GAA1RCFH6TT08

[@koifishjohnny]

LINKS TO ANYTHING I HAVE USED ON MY POND THAT I WOULD RECOMMEND ⭐⭐⭐⭐⭐ *I get a small % when you buy anything, helps justify time recording to the wife, so thank you in advance 🙏 MY POND SET UP 🐠💧 Nexus 220 🔗 amzn.to/3wxdv0h Evo Aqua Pond Pump 🔗 amzn.to/3clZyv8 Pond Water Blade 🔗 https//amzn.to/3KqEDVq Tempest Pond Water Polisher 🔗 amzn.to/3QRrTsd UV Pond UV Light 55w 🔗 amzn.to/3e0LB6r Air Pump 🔗 amzn.to/3CDn8yr Pond Declinator 🔗 amzn.to/3wyWgLV Replacement EA UV55w Bulb 🔗 amzn.to/3AZdAN3 GOOD STUFF I HAVE USED ⭐😁 EA Pure Pond Balls 🔗 amzn.to/3PSpuwh EA Pure Pond Bomb 🔗 amzn.to/3ApoQka Koi Pond Salt 🔗 amzn.to/3QSc98v Air Pump Stones 🔗 amzn.to/3APCFKb NT Labs Magiclear 🔗 amzn.to/3Klv8pA NT Labs Pond Test Kit 🔗 amzn.to/3ThN9sW ⚠ Potassium Permanganate Kusuri 250g 🔗 amzn.to/3KqpYJI Hydrogen Peroxide 6% Solution Kusuri 🔗 amzn.to/4c1GVGc Kusuri Topical Treatment Kit 🔗 amzn.to/4aIbGib EQUIPMENTN USED 💪🙏 Silirub Aquarium Safe Sealant Link 🔗 amzn.to/3vOa34d Pipe Cutters 🔗 amzn.to/3pTcDPD Grifton WDF-05 PVC Pipe Glue 🔗 amzn.to/3wxgc1R PVC Pipe Saw 🔗 amzn.to/3QRyenK Pond Net covers 🔗 amzn.to/3PQz2rx Stanley Knife 🔗 amzn.to/3TY4mJ5 Johnny Builder Gloves 🔗 amzn.to/3UeBOMQ My Koi Dealer UK Nishikigoi 🐠 Sells everything you need so if your local go there see Dave for everything 👉 facebook.com/UkNishikigoiBellLane

[@TerryOConnell-u8j]

Rule number one with anything that has threads,use ptf / plumbers tape. Creates a water tight seal. Have done the exact same on my own vari control wiring and have never had an issue,outside year round without issue. Also can put like a shelf over to keep the heavy rain off too and protect it from the worst of the weather and last keep them under the units. hope that helps some👍

[@koifishjohnny]

Belting message mate and will be doing

[@shrewsburykoi9127]

There’s always something isn’t there😂

[@koifishjohnny]

100% mate never drama free 😂

[@anthonyjones1801]

Maybe the brolly or your polycarb is dripping water straight onto the control box connections. I believe taping them up helps

[@koifishjohnny]

Cheer mate and will be taping them up tomorrow pal nice one

[@judyVeraivyHole]

Happened to me twice I put a cover over them

[@koifishjohnny]

Belting mate problem solved

[@Sharpeyskoi]

defo wrap in some tape mate

[@koifishjohnny]

100%

[@Tonydraycott-nc5tv]

Electrical tape is my go to mate.

[@koifishjohnny]

Yeah think I will be getting some as cant find it, wifes hiding sizzle again lol

[@richardbrunton2068]

Put some Vaseline above above and below the screw in bit 👀

[@koifishjohnny]

We still talking about the pond lol

[@adamsoumati9493]

Had the same thing happen, dried it out and wrapped the joint in cling film and not happened since

[@koifishjohnny]

Cling film interesting mate

[@jacamotos]

Mines in filter shed mate

[@koifishjohnny]

Nice mate

[@AndysKoiPuddle]

Either PTFE tape in the thread mate, or wrap some Gorilla Tape tightly around the outside…. 👍🏼

[@koifishjohnny]

Cheer mate and will be taping them up tomorrow pal nice one

[@busyb1504]

Expansion ? If your not running water through your skimmer/tempest line I personally would drain them to avoid freezing 🥶

[@koifishjohnny]

Not a bad idea TBH mate but not sure if I can get all water out and keep it out

[@Stallion-Koi]

Put electric tape round them

[@koifishjohnny]

100% mate mission complete

[@The360Richard]

Mine are wrapped in self amalgamating tape as one when I got in first rain I had your problem

[@koifishjohnny]

Just ordered some tape mate nice one

[@nigelsiviter5400]

Chap watch the air pump too, they aren’t rated for outdoor use.

[@koifishjohnny]

Ohhhh really no way man will keep an eye on it mate nice one

[@stephenlaming3288]

Hi Johnny, What you need to do is once you get them working you need to wrap up where they join them together on up and down so you sealed them with electric tape I had the same problem with àuto feeder and after I did what I just talking about and it stopped it and it as been fine since mate. Steve

[@koifishjohnny]

Cheers Steve mate and thats exctly what im doing, cheers pal

[@bazsprakes4175]

Heat shrink tube it’s very effective for electrics. Yes if you had to unplug its not reusable. When u shrink it if forms a resin seal type around the cable at both ends. Slide a length down wire reconnect make sure all ok slide over the connector and shrink with heat 👌

[@koifishjohnny]

wow mate thats an awesome message, never even heard of a heat shrink tube though so now im googling haha

[@skeggy]

It's a known fault with those connectors when outside esp with heavy rain in fact water can penetrate the actual control box . 1st step self amalgamating tape on the cable joint 2nd step shelter the control boxes just a piece of polythene over the top will suffice

[@koifishjohnny]

Beltin Skegstar nice one mate I put a sheet over it and taping up tomorrow

[@paulmagee823]

Get some electrical amalgamation tape wrapped around connectors mate it’s really good tape and waterproof hope this helps by the way nice pond and lovely fish you’ve got there

[@koifishjohnny]

Thanks for the tip and will do, thanks for the compliments too mate

[@jpwatergardens2290]

M8 tell some from a koi deal ea pond pump are not from ea they are boyo and all ea do is by them in put a ea sticker on them re boxing them best pump I ever had was aquaforte

[@koifishjohnny]

Interesting mate that is super interesting