Mini Truck Lowrider build part 4ish

Getting back on the ranger mini truck lowrider build ! This weekend, we are jumping around a good bit. Finishing up the exshaust from last time. Finishing up the intake. Starting to replace all of the brake components. I'm trimming a few things and getting super close to being able to start installing hydraulics on this truck ! Then, finish up the weekend with test fitting wheel options for the truck. Let me know what you think about the wheels. If you're new here, we upload videos every. Sunday ! Don't forget to subscribe, and thanks for watching !
The channel / account "virginiaisforlowriders" / "Virginia is for lowriders " along with the people /persons on the channel are not responsible for any repairs or modifications performed by any person after viewing this channel. Do not attempt to do any of the things performed on the channel. Please have repairs done by a professional repair / modification facility. Thanks for watching !!
#lowrider #minitruck #hydraulics
A.d.d.
O.c.d

[@WhiskeyDents]

Those O2 sensor extensions are awesome

[@Virginiaisforlowriders]

@@WhiskeyDents I've been using them for a really long time they work well.

[@Bwaynecustomz]

Personally love the cross laced wheels 🤘🤙

[@Virginiaisforlowriders]

Me too !

[@LUISREYES-cf1op]

Awesome video, love the small details always!!!!!!

[@Virginiaisforlowriders]

@@LUISREYES-cf1op Thanks for the support!

[@Brooklyn_Powers]

I like the ones that are cross laced the best. Good video, man!

[@Virginiaisforlowriders]

Me too! Thank you!

[@jefferybentley1534]

Great video u are the goat when it comes to mini trucks I drive a 2 wd blazer that is slammed always loved mini trucks can't wait for next week viedo hope all is well my friend

[@Virginiaisforlowriders]

@jefferybentley1534 I appreciate man. Blazers are cool i looked for one before I bought this . Hope everything is good with you too bud

[@blazebrady3659]

I know you're trying to use wheels you already have, but that thing screams Supremes!! 👍 Look forward to more of this project!! 🍻

[@Virginiaisforlowriders]

It really does. I'll throw the ones off the caprice on there one day and see how it looks. Thanks man !

[@woodnwaveracer]

Like the second set of wires the best. Thanks for the motivation this week.

[@Virginiaisforlowriders]

Me tooooo. Yessir

[@draggindakota93]

Zenith's FTW. That's gonna look sick sitting on 3 😁

[@Virginiaisforlowriders]

I agree! I'm excited for this one!

[@Ghost-um2jw]

I like the 14's better too. Looks good!

[@Virginiaisforlowriders]

@Ghost-um2jw thanks man ! The 72 spokes are my favorite on it so far

[@fastcivic72]

I like the China ones look pretty sweet.

[@Virginiaisforlowriders]

They are a Good looking wheel !

[@tommybomber]

definitely look forward to your ranger videos! the china ones look just as good as the others btw

[@Virginiaisforlowriders]

@@tommybomber I agree. Thanks for watching !

[@gravesgarage]

Very cool build! That Lowrider is clean!! I subbed !

[@Virginiaisforlowriders]

Awesome! Thank you !

[@jesseray2535]

Definitely following this build!! I have a 91 on dream beams and I’m wanting to do the same thing.

[@Virginiaisforlowriders]

@@jesseray2535 awesome ! Thank you for watching !

[@Hardy_boy1]

Hello from Culpeper, i just got a 1989 ranger xlt two-tone blue and white, I can't wait to slam it.

[@Virginiaisforlowriders]

@Hardy_boy1 That's great ! I'm in Fredericksburg we are pretty close .

[@Hardy_boy1]

@Virginiaisforlowriders yes we are, im in Fredericksburg all the time. I'll keep my eyes out for a slammed truck cruising down rt.3 🤙

[@WhiskeyDents]

Sweet build man. Needs a 302 lol

[@Virginiaisforlowriders]

Thanks man lol. I'm ok with whatever this one has as long as it drives down the road. I subbed to your channel i could have sworn I was already subbed

[@WhiskeyDents]

@ I subbed you again and I know I was subbed before. I’ve watched a bunch of the Mazda videos

[@Virginiaisforlowriders]

I've had 4 friends tell me the same thing that happend to both of us now. They've told me on multiple occasions when they watch my videos they notice it says they aren't subscribed. Not sure why it would do that. I know for sure I was subbed to your because I watched giveaway truck videos.

[@kirkoglesby6175]

Crawford is in the house.

[@Virginiaisforlowriders]

@kirkoglesby6175 better late then never. Took a long time to upload this one being that it's so long.

[@kirkoglesby6175]

@Virginiaisforlowriders it's all good, brother. All part an parcel of doing the things with the things.

[@scottp7744]

Zenith look the best. Just switch them out every now and then

[@Virginiaisforlowriders]

Same thing I'm thinking !

[@MichaelSanchez-c3k]

🔥🔥🔥🔥💯😎👍✔️

[@Virginiaisforlowriders]

🫡

[@kennyleejohnson5253]

Great video as always. What is the link for the overflow tank?

[@Virginiaisforlowriders]

Thank you sir. a.co/d/j9MkUfX

[@turbeau405]

Crawdad on Daytons

[@Virginiaisforlowriders]

So far the votes are pretty heavy towards the zeniths and I gotta agree they are my favorite so far.

[@christophermcbride3284]

Good video but would have a debate in while of the first two and yeah the 13s r small for the truck

[@Virginiaisforlowriders]

Thanks man. The 72 spoke wheels to me fit the truck the best.

[@WhiskeyDents]

You bought one of those jacks from Vevor? Did you watch my review on it? I love it.

[@Virginiaisforlowriders]

@WhiskeyDents It is a vevor. I love that thing it's so much easier then a normal jack. I'll have to check out your review.

[@EarlMohme]

I'd would of put the air filter on the driver side there's more room now you pull the over flow out

[@Virginiaisforlowriders]

@EarlMohme I was more trying to keep it cheap and simple. The intake faces the pass side I would have needed to use 2 more elbows to turn it the opposite way. Thanks !

[@rickcrusenberry7027]

Second

[@Virginiaisforlowriders]

😆

[@johnnyj9556]

When your Uncle Frank used to work at Midas he always told me that when your brake fluid does not disappear what happens is the brake line the rubber line is stopped up okay

[@jayinmi3706]

Because of the beams, could you bottom out the suspension crossmember if you hop it?

[@Virginiaisforlowriders]

@jayinmi3706 Yes. As much as it hurts me this truck will not lay out all the way . It's going to be low but more of a static truck low.

[@blacktahoe6409]

3rd

[@Virginiaisforlowriders]

🫡

[@fastcars1road]

first 😆

[@Virginiaisforlowriders]

🫡

[@magicman_metal_fab]

On a scale of 1/10. Where is your mind at on getting the chassis started? Just asking because you must have patience of a saint to be doing all this small stuff first 😂🤣😂

[@Virginiaisforlowriders]

Hahaha I need to make it semi reliable first. It's been sitting forever and there's a lot of sketchy stuff to address. I'm going to do the wrap in portions not a cab off right away deal.

[@shortsbbq]

Zeniths or nothingggg unless it’s a set of supremes

[@Virginiaisforlowriders]

@shortsbbq bonus option ! I'd be down for those. Only thing is I don't think they can handle 3 wheeling .

[@shortsbbq]

@ maybe once you get all your hoppin out your system put supremes on lol

[@eviltechracing]

I'm curious how well the I beams will hold up to hydraulics

[@Virginiaisforlowriders]

Very very well. It's a common thing for rangers to be lowriders. I'm excited to finally do it my self .

[@eviltechracing]

@Virginiaisforlowriders we beef em up alot when we build prerunners on stock beams, do they need beefed up at all especially for street hopper

[@eviltechracing]

@Virginiaisforlowriders the cross laces are my favorite so far (you just put the china's on in the video)

[@Virginiaisforlowriders]

@eviltechracing From what I've seen, i don't believe so. The other channel i talk about from time to time "magic man metalfab" he used to be sponsored back in the 90s and travel the US hopping a ranger ill have to ask him about it but i don't believe he mention doing anything to the beams then selves.

[@Virginiaisforlowriders]

@eviltechracing by far my favorite also .

[@juniorwhelchel6337]

Where so you buythe skates for the truck and what ar.they called

[@Virginiaisforlowriders]

Go jacks and i purchased them off the internet.