Mini-Verse Cafe Series 1, part 1

[@erikshappywife]

You can turn the capsules into cool ornaments that can hild stuff inside like small gifts or tensil and other decorative goodies. You can give them as gift ornaments with the small gift and eome pretty stuff inside. 🎊

[@alexdarling2052]

That is a great idea!

[@erikshappywife]

To clean the tips I use an alcohol prep wrapped around a toothpick, it works really well for me❤

[@lonnibaird8018]

I bought an extra All You Can Eat set so I'll have extra drawers and shelves!

[@erikshappywife]

I was hoping to do that too...maybe for Valentine's Day or Easter

[@erikshappywife]

The lemonade 🍋 is my favorite 😊❤

[@Mmaattyy]

I just clean the tips by shining my uv light in til it hardens then I fish it out with a pin

[@alexdarling2052]

I tried that recently and was surprised how well it works!

[@Shari_A._]

I soak the tips in rubbing alcohol then twist an alcohol soaked paper towel into the tip to get that clean. I'm thinking of buying some of those pointy q tips to see if that will work. Also, when I get a collection of them, I'm going to try curing the resin inside and see if I can just take it out with tweezers. It shouldn't stick to the plastic when cured, but I haven't tested that yet, so I won't swear to it.. heh

[@alexdarling2052]

Let me know how curing it inside works!

[@Shari_A._]

@@alexdarling2052 Can confirm curing it in the lid worked for me. I took the lid off and held it upside down so it would all go down by the tiny hole. Cured it inside. Then flipped it over and poked an awl through the end (you can probably use a toothpick, that was what I had close by) and all the resin just popped right out. I also got some pointy q-tips off amazon, so I can just dip those in alcohol and use them when it's just a tiny bit of resin.

[@StemlessRose]

I really enjoyed your video! The lemonade was my favorite!Where did you get the counter?

[@Sarah-zz4nt]

It comes with the all you can eat set I have it and I love it but it is 70 dollars

[@StemlessRose]

@@Sarah-zz4nt thank you

[@StoneWolf99801]

If you want the resin to flow better, just get a cup of hot water and let the bottle float in it for a few minutes. Warm resin flows better. I would not microwave it. But just a coffee cup of warm water works just as well. If your sink water gets hot enough, just use water right from the tap.

[@robinshapiro8965]

Use baby whip and toothpick to clean nossle

[@robinshapiro8965]

Use hot water and let the bottle sit in hot water for five minutes

[@StoneWolf99801]

Series 1, the plastic bags, you were meant to cut the tops to make them look like grocerie shopping bags. So dont cut the tops straight across. You cut a square, leaving bag straps at the top. And then you have pretty plastic shopping bags.