How To: Mini Cooper Rear Subframe Upgrade No 2

  Рет қаралды 68,313

Mini Mania, Inc.

Mini Mania, Inc.

Күн бұрын

Пікірлер: 12
@r.five.3
@r.five.3 6 жыл бұрын
Don't know if its a thing but can you do a video on the rear subframe removal, would really be nice. Thanks :)
@stevetaylor2460
@stevetaylor2460 4 жыл бұрын
Hi, I have just followed these instructions of assembly and then found that it’s difficult to fit the trunnions at the front of the rear subframe. Is this still possible with the radius arms in place? Thanks
@pierrejauvin850
@pierrejauvin850 5 жыл бұрын
Tel me you have a video off installation of the allwell drive rear subframe because i am stock i don't no we're to cut in the trunk areas please help witt a video thanks
@chrisshort4198
@chrisshort4198 2 жыл бұрын
can someone explain wet and dry please.
@minimania
@minimania 2 жыл бұрын
"Wet" refers to the Hydrolastic suspension of some early Minis where bags of fluid were used to dampen the ride from to back. "Dry" suspension refers to the rubber cones and other types of suspension.
@atesmatbaa6531
@atesmatbaa6531 4 жыл бұрын
where can i find this subframe
@fivedotsdave9723
@fivedotsdave9723 8 жыл бұрын
When using this coil spring set up if the car is too low can the spring fall out or does a shorter shock need to be used to limit the travel?
@minimania
@minimania 8 жыл бұрын
It could happen, in theory. But this would be only if the car's rear suspension were to be completely unloaded, like it would be by jacking up the rear end and not supporting the rear swing arms and letting them dangle freely (or, while on the road by jumping over something or hitting something that would force the rear end high enough in the air - and for long enough - to unload it and have the springs fall out). So, highly unlikely. The biggest risk is when working on the rear and not supporting the swing arms and jacking the car too high thereby unloading the trumpet/spring connection.
@PapotsGarage
@PapotsGarage 7 жыл бұрын
So for you it is completly normal ? Have this situation, where if I want a proper ride height, (not even that low) the spring will fall out if the wheel come unloaded. And still have a sport shock absorber...
@63mesiken
@63mesiken 2 жыл бұрын
I’m needing to replace mine on my 84.
@johnevans6474
@johnevans6474 5 жыл бұрын
Reminds me of the time I did this, 50 years ago 😢
@mad-maxx2211
@mad-maxx2211 3 жыл бұрын
How old are you now?
Operation Bad Wolf - How to Drop a Mini Rear Subframe  [Ep. 10]
19:50
Classic Mini DIY
Рет қаралды 28 М.
How-To: Classic Mini Front Subframe Assembly Part 2
11:20
Mini Mania, Inc.
Рет қаралды 43 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 108 МЛН
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
How to IMPROVE your classic mini's suspension
13:07
Stevestonmotorco
Рет қаралды 151 М.
How to Install Classic Mini Shocks/Dampers
9:56
Classic Mini DIY
Рет қаралды 48 М.
Classic Mini DIY - Cone to Spring Upgrade - Part 2
18:35
Classic Mini DIY
Рет қаралды 60 М.
How to Install Ball Joints on a Classic Mini
30:09
Stevestonmotorco
Рет қаралды 108 М.
Classic Mini, Part 2   replacing the Ball Joints
19:24
D3Sshooter
Рет қаралды 25 М.
My Janspeed Mini Cooper-S
14:21
AxemanTurk
Рет қаралды 367 М.
How to Remove the Front Subframe on a Classic Mini
7:04
Stevestonmotorco
Рет қаралды 45 М.
More welding on my classic Mini
11:42
Bee's speedshop
Рет қаралды 208
Classic Mini Engine Performance Upgrades
17:44
Mini Mania, Inc.
Рет қаралды 283 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН