Just bought a boat came with the trolling motor didn't know what kind a fish finder works with sonar big help thanks
@jeremiahalmos26433 жыл бұрын
Helix 5
@ourfamilyties65764 жыл бұрын
I just recently found out the garmin striker 4 plus traditional chirp, supports frequencies 50/77/83/200, hope this helps. So it's a perfect fit
@markraven70629 ай бұрын
Did you have to run separate power to your monitor or does the powerdrive supply the 12v DC power also?
@maxmoore88762 жыл бұрын
Why in the hell doesn’t Mincoda put a better transducer on these motors? That are capable of down imaging and side sonar?
@dustinjenniferwynn63726 жыл бұрын
Helpful video. Did the striker work for you with the us2? Attempting to connect a striker to a fortrex and used the 4 pin adapter however the unit keeps reading that the transducer isnt connected. Wondering if your unit worked you on the water?
@OutdoorswithDonandBob6 жыл бұрын
If you're going to use the built in transducer on the trolling motor you need to change the settings on the striker. Off hand I don't remember all the steps, but go to settings on the striker, and look for transducers. There you should find an option for Minn Kota and you highlight that. It will give you some sort of warning about using a different transducer but don't worry about that. I've replaced that Minn Kota with a Terrova, and replaced the striker with a Garmin Echomap, I had to make the same changes again for those.
@dustinjenniferwynn63726 жыл бұрын
@@OutdoorswithDonandBob this is exactly the info i needed . I truly appreciate the response!! Thanks so much!!
@OutdoorswithDonandBob6 жыл бұрын
@@dustinjenniferwynn6372 Glad I could help.
@GmGarlo2 жыл бұрын
is the transducer on your lower unit the size of a puck? because some take up most of the lower unit , which makes it hard to add a transducer for another fish finder.
@OutdoorswithDonandBob2 жыл бұрын
you can add a transducer for another finder
@garrettlabreche72772 жыл бұрын
Did the wiring for us2 come out of the head of the motor? Mine is currently in the head of the motor and not sure how to run it or set up to get it out of the units head
@OutdoorswithDonandBob2 жыл бұрын
I haven't had that motor for three or four years now, and I can't remember exactly about the wiring.
@Jfldhr3 жыл бұрын
Is the side imagine and downs imaging is going working in Garmin as well ?
@OutdoorswithDonandBob3 жыл бұрын
Today I use a Minn Kota Terrova with a Garmin, and the only thing that works is the standard sonar. Side and down imaging does not work.
@CraftyLemons4 жыл бұрын
Couldn't you theoretically get any $30 adapter and make a fishfinder work?
@OutdoorswithDonandBob4 жыл бұрын
I'm not really sure about that, sorry I can't be more help.
@DanielSon694 жыл бұрын
You need one that is brand specific.
@wesleykoons90323 жыл бұрын
Just seeing if I could run my lowrance hds7 insight with my minnkota powerdrive ipilot and spot lock with built in transducer
@OutdoorswithDonandBob3 жыл бұрын
Not sure on the Lowrance with the Minn Kota. The Garmin needed an adapter to work with the Minn Kota.
@wesleykoons90323 жыл бұрын
@@OutdoorswithDonandBob thanks buddy I'll give it a whril