Minot USPSA Aug 11, 2024 - Laugo Alien Creator Evolution Limited Optics

[@jaceprovo]

I use the double alpha trigger guard holster on my creator, limited optics, which works extremely well. The big dog holster works, and is Kydex. I prefer trigger guard holsters for my 2011 as well. They don’t mark up the finish and are very fast. The downside is that you have to make sure that the trigger guard is locked in properly. Otherwise the gun hits the ground.😊

[@MichaelKennedy-k2q]

What holster are you using? I just purchased the Alien Creator LO. Thanks

[@Cwjones103]

Looks like you are using XiP mag pouches. What size inserts are you using? I pick mine up tomorrow and can't wait!

[@ZEE0H6]

I’m using the Racer pouches. Thin side insert with i think the thick back spacer. It’s the same size as my shadow 2. I can fit a glock mag in it if I had to, but it’s a little tight. Hope that helps. Make sure you’re using true FMJ bullets like S&B. Plated bullets that are labeled as FMJ such as Blazer or Federal Champions will seize your piston. Enjoy it!

[@Cwjones103]

@@ZEE0H6 Thank you for all the good info! I have a lot of Blazer 124 right now unfortunately. I didn't realize they were not true FMJs and have had good luck with them.

[@ZEE0H6]

@@Cwjones103 same here, blazer was my go to as I can easily find it locally. I’m sure the plated ammo labeled as FMJ causing malfunctions is what gives the Alien a bad rap for reliability. My Alien has been perfect with S&B and i dont even clean it very often.

[@Cwjones103]

@@ZEE0H6 Yeah I’m having a tough time figuring out who actually has a true FMJ. Looks like it’s S&B for me too.

[@ZEE0H6]

@@Cwjones103 Fiocchi 115gr is FMJ, but i dont think it’s loaded hot enough. Mine will not cycle reliably even with the light weight recoil spring. WWB is FMJ, i’ve only shot a box of it, so i dont have enough round count with that ammo to trust it for a match.

[@Gabierama]

How is your Alien? Is reliable? What ammo are you using?

[@ZEE0H6]

@@Gabierama i absolutely love it. Zero malfunctions with Sellier & Bellot 115/124 gr. Blazer Brass used to work back in March but I bought a case in june and it didnt work. Blazer and Federal Champion is plated ammo and the manual says use jacketed ammo, as it will foul the gas piston. Fiocchi is jacketed but underpowered and will not cycle.

[@Gabierama]

@@ZEE0H6 so you can only use one brand of ammo so far? 😅

[@ZEE0H6]

@@Gabierama magtech, pmc, fed american eagle, etc. work as well, i just use s&b because its cheaper and i have zero issues with it. I dont feel the need to pay more to achieve the same thing.

[@Gabierama]

@@ZEE0H6 I see, thanks for the clarification. Btw , great video and great shooting!

[@MichaelKennedy-k2q]

What holster are you using?

[@ZEE0H6]

I’m running the Big Dog Steel Carnivore

[@MichaelKennedy-k2q]

@@ZEE0H6

[@MichaelKennedy-k2q]

Does it fit in the holster with the thumb rest attached. What hanger did you use? Are you happy with the setup? Do you know if the Double Alpha X holster would work?

[@ZEE0H6]

@@MichaelKennedy-k2qyes it fits with the thumbrest if it is in the farthest aft (shortest reach) position if the rest is in the horizontal position. It will fit further forward with the rest in the vertical position. You could dremel it for more clearance if required. The Alpha X fits. I have both and prefer the Carnivore. It is possible to bind the Alpha X, and the Alien’s rail rubs on the aluminum body of the holster enough to removing the anodizing.

[@jaceprovo]

I use the double alpha trigger guard holster on my creator, limited optics, which works extremely well. The big dog holster works, and is Kydex. I prefer trigger guard holsters for my 2011 as well. They don’t mark up the finish and are very fast. The downside is that you have to make sure that the trigger guard is locked in properly. Otherwise the gun hits the ground.😊

[@ZEE0H6]

@@jaceprovo the Big Dog Steel Carnivore is not kydex.

[@jaceprovo]

@@ZEE0H6 I stand corrected.👍

[@jaceprovo]

I have combed the website and I can’t seem to find out what it’s made out of question. Perhaps you can elucidate this question?

[@ZEE0H6]

@@jaceprovo it’s made by selective laser sintering. Nylon is what is commonly used. I dont know the exact nylon formula they use though.