Mint Honda TRX 250, Seized Drivetrain, Making It Roll, Motor Locked Solid!

[@martinburgess4814]

Mystery, you can sort it out Harvey, looking forward to seeing you get it done. All the best to you

[@dannydepino3874]

Id say the piston and rings are stuck solid in the bore or camshaft maybe stuck from sitting for many, many, many, many, yrs, it looks like a low machine to me. Id load everything up with mystery oil let it sit in the hoard for a week or so let the Honda gods work their magic then bust out the 1/2 drive and try turning the crank again i always enjoy watching Harvey lookin forward to the next video..

[@josephhammer4103]

I just got a 84 Honda TRX 200 for free!! I’m hoping to put some Marvel in it and see if I can free up the engine!! Wish me luck! 😊

[@garywhitmer5942]

they are good four wheeler ive got a 86 and a 86 sx atc same thing less one wheel

[@mikeatv]

that way that gasket material on the cyl. head looks maybe someones been in there…… you could have a broken valve or something hitting on the top of the piston…maybe…. either way that motor can be saved it just looks like it has really low miles…

[@markeithpeacock222]

Mr Harvey yall get it going soon

[@hjcj2685]

Absolutely the best quads brother

[@EmanDeluxeVLOGS]

We rolling 😎 🤪 wow easy rollin!

[@davekimbler2308]

I’m still thinking it’s on the other side , it might be the driveshaft output shaft with the 90 degree to the drive shaft ( what it’s called escapes me ) the motor side of the boot ! The gear on the clutch side looked out to far ( it could be my imagination but I thought the gear needs to be up against the casing . Output gear drive to drive shaft !!!! Sometimes they loose the snap ring on the gears and the shaft moves towards the clutch side .

[@jefferybrimer5586]

Rear end problem most likely brake shoes have delaminated and are free floating inside drum and getting layered up causing it to bind sometime

[@RoyBoyMX]

Wish I had the hoard lol … just found a weathered Trx 200 haven’t looked at it yet but I’m sure I’m gonna need the wizards help.. ( I nicknamed you, the wizard…)

[@jaykay1771]

What if they just put the oil in after it ceased

[@rilyb15]

How do the valve caps look, was anybody in there? Could the timing be THAT far off??🤷🏻‍♂️

[@CalvinsCorner72]

I got a video coming out tomorrow you should see. 👍 I hope mine doesn’t do this one day. 🤞

[@tommycowger9585]

I would put some marvel mystery oil in the cylinder and let it sit a day or so then try to get it to turn

[@Bri-tg6xr]

Got one of these for $375, ran but was a real basket case and was in very very bad shape. Got it running with a donor CDI, ever hear of a CDI that kills spark within 5 min of driving it but it drives in reverse perfectly?? Swapped in another one and it ran fine, would a bad CDI cut out like that?

[@2035jim]

Harvey we’re did you buy it from?

[@jamespaulson5211]

Did you pull the spark plug?

[@gragspep]

Do you ever sell anything .I'm in orange county ,hudson valley . I'd like to meet you

[@futureforcaster8576]

i,m thinking stuck piston.

[@hondamanatc4life983]

Not getting far into the video yet but I think with the rear end part it might be brake pads fell apart and they're hanging up

[@atvseatexchange2176]

Wow, the mystery continues. Will the donor be revealed, will the real identity of the superhero be made public, or will there be a series of twists and turns before the truth is known? Stay tuned for more mechanical drama with Harvey Spooner.

[@mikeshobbiesandrandomstuff]

Give her some oil down in the cylinder and on the valve stems and get it rolling in gear and dump the clutch.