Mirka DEROS 650 CV- Cleaning and repair of the damaged part (free)

Become a member of the community and donate to the channel.
Thanks everyone!!!
/ @amddetailing
#mirka #mirkaderos650cv #sandingmachine #repairs
It's time to open the sander, clean and repair (for free) one part that is a problem on the sander.
Watch the video and find out what it's all about.
ORDER LINK:
asdetailing.ba/

[@Mr.johansson]

Thanks my friend for this opportunity to learn more about mirka sander 🤩👏

[@l0r3nz0rm]

The tools are much expensive so taking a care of them are essential

[@Amddetailing]

Yes friend,tnx

[@anmihovil]

Detailing the detailing tool. I've never seen that, 'till now ;-) Now I'm sure that buying Mirka sander is the right choice for me. I would bump into this sort of trouble after at least 30yrs of usage. Great video Alen. Greetings to Sarajevo!

[@Amddetailing]

The machine is one of the biggest on the market for sure and it works without a fuss and I've really been using it for a year and nothing has broken except for the fact that it has become a bit noisier, but here's how to solve it

[@DavidCarreau]

Be careful I have 4 of them. 3 were sent out 4 months ago $720 to repair. No estimate just a bill.

[@kushtrimismaili786]

Wow, it became like new😍 helped to fix my mirka too

[@Amddetailing]

Tnx my friend 😘😘🙂🙂

[@DansAutoBody]

Great info. Thank u

[@barrymccann5600]

The vacuum helps to keep the sander cool when I use

[@QWERTY7773]

Don't know if this will help but i bought the Deros and used it for 4-5 years so out of warranty. Then it started playing up then one day (using the 125mm pad) it would stop working one Minuit it worked then when i pushed the paddle the red light would flash and nothing. So i unplugged left it then it would work then do the same. So went on here watched the videos stripped it down cleaned it but to be honest it wasn't that dusty as i always use my mirka dust extractor. Ran it with no pad worked fine then put the 125mm pad back on used it same thing happened. So more videos and research stripped it down again only this time i removed the plastic cover that surrounds the spindle (can't think its name) cleaned the fins which again wasn't that dusty put it back together only this time instead of the 125mm pad i put the 150mm pad on (less used) and it works now (i will keep u updated) Conclusion the only thing i can add is in one of the posts i saw said when somebody had a similar problem was they noticed the pad was worn but initially i wrote this off as when has a sander stopped working due to a pad. However i don't know whether my slightly worn 125mm pad has some how interfered with the brake that slows the machine down when you release the paddle or was it the cleaning that sorted it which i doubt as it was quite clean anyway hope this helps.

[@emillungu3974]

Man you need to buy a hoover! Gret video

[@TheChercoB]

Hi.. Big fan! Ive wanted to add a mirka orbital sander to my arsenal because I've been hand sanding untill now. Which one would you recommend me?

[@Amddetailing]

Take this 5.0, it's much more durable than the 2.5, you don't feel it while grinding with it

[@panganaranga]

When a part has play, itˋs also called it has luft?

[@willnotcomply4144]

Do you know how I can get a new switch mine stopped working after like 6 months. It doesn't work when pushing paddle down does nothing

[@Amddetailing]

you have some water on the channel, compared to, for example, water sanding, where the advantage of dry sanding was explained and shown

[@barrymccann5600]

The aluminium part is glued in once you hit it with the hammer it breaks the glue holding the motor to the body and can sometimes lead to the motor coming loose when in use I made the same mistake.

[@colourtubes_au]

mine was already loose

[@panganaranga]

Yep, i thought…now he pulls out super glue when the Alloy part was in place…but didnˋt happen…

[@raffaeledeangelis3536]

hi, I bought the new control unit for a car, I replaced it but it doesn't increase or decrease the speed. can you help me?

[@Amddetailing]

You didn't understand something, if it's a new product it has to work, or I think you have to contact the Mirka site so that they can start it up for you.

[@blank1374]

Mirka sanders control units need to be programmed by mirka or their dealers. otherwise you cant increase or decrease the speed

[@Steinstra-vj7wl]

Mirka has a big problem with so may Deros sanders go bust. KZbin is full of such reviews.

[@raffaeledeangelis3536]

They told me that they are coded and they don't unlock them, only they can intervene. Bastards. Sorry for my english

[@dawidczerniak5177]

Mirka service isn’t that expensive… usually it’s a fraction of the price of new unit. I had mine for about 6 years before it started playing up. In my opinion it’s worth the money