CNC Web Vase

[@CSWilsonDraws]

That has to be the coolest bowl I've seen in a very long time. I like the shape, the choice of wood and the delicate lines created by the light wood. Very well done. Seeing creations like this really inspire me to get back into the shop.

[@mirockswoodshop]

Thank you). It seems I also need to get back there and make something more

[@sevnollogic]

Thank you for going to the trouble of uploading all your work. I really appreciate the entertainment of watching and listening too you!

[@mirockswoodshop]

I glad you watch my videos! Thanx!

[@crazyrussianwoodshop3957]

This video was a treat to watch on Sat morning before my first cup of coffee!

[@user-oy1mh2zn9y]

Have a nice day Michael)

[@tonybp965]

Love the fact that you're are experimenting with your CNC, and results were good. Thank you sir.

[@mirockswoodshop]

Yes, mastering of this machine takes sufficient time, but I cant say it is boring). Thank you Tony!

[@tonybp965]

+mirock's woodshop It's my pleasure. I'm the one that's learning from you. I imagine it's very expensive.

[@Mongrel85]

That came out well, it is nice that your experiment was functional, mine usually end up in the fire until I get it right!

[@ralfb8869]

You turned some sort pieces of wood into a beautiful vase, thanks for sharing. :)

[@scruoge]

Чувак, не скотч! Tape! Scotch - это вискарь! ))) А вообще - уважуха. И уровень инглиша очень очень неплох. Я бы наверное не смог так говорить. С удовольствием смотрю твои видео, спасибо за интересные проекты.

[@mirockswoodshop]

Вискарь это тоже неплохо). Согласен учту. Хотя Scotch-tape 3M все должны знать

[@iannesbitt2986]

That was very good to watch. I think it turned out very well.

[@DADT12]

Beautiful!! I’m going to give this a try!!

[@nickbeukers4336]

Hello from Australia, you make it look so easy, you do beautiful work, keep up the great work.

[@mirockswoodshop]

Hi Nick! Thank you!

[@joppepeelen]

Nice idea with the layering of the veneer cool stuff !

[@ellmannvictor]

Amazing. I hope that I can have a CNC machine one day. I am sure you are an expert by now.

[@RichardMartin]

That's really cool, looks beautiful.

[@EngineerMikeF]

Thanks for the benefit of the feed speed lessons you have learned. Beautiful work btw

[@GetSquarewTomJolley]

nice job, never would have thought to do a bowl on the cnc router

[@robgraham5016]

Nice job! That just shows with a little bit of imagination and some time well spent, what is possible! Thank-you from another hobby wood worker! Rob - Toronto

[@mirockswoodshop]

Hi Rob! I glad you watch my trials in Canada. Now we can observe our colleagues in whole world. That's so cool!

[@robgraham5016]

Where abouts are you Mirock?

[@mirockswoodshop]

+Rob Graham Ukraine. Dnipro

[@brasileirodobrasil5045]

Thanks for the layer trick! beautifull item.

[@jonathanpogson4702]

Inspirational. Fantastic work, thank you for sharing.

[@mariocardamone1846]

i love your work and narrative very helpfull keep up the good work

[@simoms2100]

Very very very good !!! Super beautiful!

[@Lawmtho]

Beautiful piece! Love the web like effect!

[@mirockswoodshop]

Thank You!

[@johnprice2802]

Beautifully done.

[@nachtdiertje1972]

Nice vid, at last a woodworkerpart and a cnc-part combined. nice result

[@mirockswoodshop]

When I did it I figured one more resmble way for workpice. I'll try next

[@FormerlyKnownAsAndrew]

This is excellent! Well done.

[@tagiti]

Looks like a holder for a rugby ball, interesting to watch, as are all your vids, well done.

[@mirockswoodshop]

Never see this holder. Rugby isnt so popular here. I think this ball should be bigger

[@tagiti]

Ha ha , it is still a nice bowl.

[@MaximKozlovBlog]

Cool job!

[@mirockswoodshop]

Hi Max!

[@leandrojason1387]

sorry to be off topic but does any of you know of a method to get back into an Instagram account? I stupidly lost my login password. I would appreciate any tips you can give me.

[@braydencason8359]

@Leandro Jason Instablaster =)

[@leandrojason1387]

@Brayden Cason I really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff atm. Seems to take quite some time so I will reply here later when my account password hopefully is recovered.

[@leandrojason1387]

@Brayden Cason it did the trick and I now got access to my account again. I'm so happy! Thanks so much, you saved my account!

[@hossamagamy5558]

Nice work sir, how much does it take to make this potter on CNC?.. how many minutes in average?!

[@TheWoodWerker]

Nice Video! Nice Bowl! Thanks for Sharing! I learned a lot. Thumbs up! Have A Super Week!..... Gus

[@DavidNevala]

Very nice! Have you explored the option of a 4th axis for your cnc?

[@mirockswoodshop]

It is possible. Might buy additional set and install. I dont need it yet

[@poetwarriorrare9489]

very nice....next one try for larger salad serving bowl

[@טוניכהן-ג3פ]

Hello ... very nice job, I also have a small machine at home But do not know how to create a 3D file Can you please send me a plan of this beautiful bowl?

[@javibendir]

wonderful work! congratulations.

[@comak7573]

I have been meaning to using a try a similar technique (at some point) to make a violin front and back. Its nice to see that your project went well. Perhaps it wont be as hard as i thought. Good work!

[@mirockswoodshop]

Thank you! Is it possible to see somewhere, I mean your violin parts?

[@mirockswoodshop]

Thank you! Is it possible to see somewhere, I mean your violin parts?

[@davidboswell9024]

Really impressed

[@CyrusTabery]

Nice work! I wish I could sand that fast.

[@mirockswoodshop]

you can switch 8x and do faser)

[@CyrusTabery]

I have used 400 sandpaper and it still takes longer :)

[@mirockswoodshop]

Haha)

[@xnadave]

Looks great!

[@hecope]

Love it, very inspirational

[@zohranbloedjes9770]

Cool video whit a nice outcome

[@mirockswoodshop]

Finally). I glued this block quite long time

[@1kapav1]

Daan.Z.bloedjes n

[@hugobose2254]

Seen some of your Vids before And another Top Job Mirock

[@mirockswoodshop]

Nice to heard it. Lets watch further! Thank you!

[@matzoman3401]

Nice Design.

[@yplandrew]

Good job !

[@mirockswoodshop]

Nice to see your comment, Andrey!

[@jeanaimarre8068]

Beautiful Barbie wood bath ^-^

[@mirockswoodshop]

Haha)

[@AlbertoMartinez-rk2lf]

cool vase!

[@mirockswoodshop]

Thanx Alberto!~

[@dwork79]

Nice result! What brand of endmills are u using and software.

[@mirockswoodshop]

Some of our local brands and djtol. Any international famous. Just CMT but not for CNC

[@willemkossen]

Very nice bowl!

[@mirockswoodshop]

Thank you, Willem!

[@johandavid9774]

Nice vase! I wonder how much that kind of 3D machine costs?

[@mirockswoodshop]

www.instankoservis.ua/ ATS0609 3900$

[@modeliumeistras]

Vov! Nice job ☺

[@forestlampcraft472]

cool

[@Jonesey1111]

beautiful work! what is the z height of your machine?

[@mirockswoodshop]

150mm

[@samersaleh3207]

very nice man, which brand of cnc do you have? thanks

[@mirockswoodshop]

www.instankoservis.ua/ ATS 0609 but my machine absent on site. It is made for custom size

[@AlfFisher]

Very interesting job. I like :)

[@mirockswoodshop]

Mark:)

[@ruralaccentwoodcraft604]

Great project!

[@mirockswoodshop]

Nice you like it!

[@oneworldnoborders]

Hi,Wat oil do you use?

[@Lazywatchsmith]

Awesome!

[@mirockswoodshop]

Thank you!

[@janhbrenna4264]

Congrats, thats looking very good ;)

[@mathboy1212]

What program did you use to create the tool path?

[@xenusceptic]

Good job

[@MegaDtbh]

i like youre videos very much!

[@nyilaymg5691]

How to draw plate wooden for artcam? Please, Share Video. Thank You!

[@martijnfransen9933]

nice work!

[@paulsmessyworkshop]

Very nice.

[@matthewmartin6745]

Please, What Program's do you use to create the design and what program do you use to actually cut the design ?

[@mirockswoodshop]

SketchUp for 3d modelling. Vectric Aspire for making cutting programm

[@MarcesIsCool]

Amazing man greets from switzerland✌🏻️

[@mirockswoodshop]

Great country! Thanks!

[@Bawdsey64]

Hi Mirock,What CNC do you own? Interesting video.

[@mirockswoodshop]

From there - www.instankoservis.ua/ ATS0609 3900$

[@stroydvor5023]

т.е ленточка пилит хорошо раз можно клеить? Или полотно суперское какое?

[@user-oy1mh2zn9y]

Обычное полотно. Мелкозубое и стараться не вилять и пропилить за одно движение чтобы ступенек не наделать.

[@UraKrugliu]

sail to the boat is izgotavlival?

[@mirockswoodshop]

not yet

[@usernew1764]

Great job. Can you chare thr gcode fir this job

[@mirockswoodshop]

Old work. Not saved sorry

[@aleandrsworkshop381]

Unusual project

[@mirockswoodshop]

!

[@dennisbuckner6957]

well done i like it

[@mirockswoodshop]

Welcome!

[@lawrencediggs7957]

Brilliant!

[@nikolai_s]

★★★★★ шедеврально!

[@mohammadshamirkhandurrani8011]

Impressive

[@markhbiohazardchef3243]

Awesome!!!

[@davidperkins5232]

Love the project but the audio is very low.

[@philipyoungblood1]

very nice

[@malcolmtemporal6571]

Can you give the cost of cnc pleas

[@mirockswoodshop]

No problem - 3900$ - www.instankoservis.ua/frezernye-stanki/ats-0609-m.html

[@HereForChess]

Possible for you to do a Custom Project for me? Do you have an email? I can send you the design file.

[@ChetKloss]

Nicely done. I think I'll adapt your technique for the lathe.

[@mirockswoodshop]

I think there will be no problem.

[@MarchCat143]

Очень симпОтно

[@mirockswoodshop]

Упражняемся

[@Александра-н6н9б]

я так правда и не понял для какой цели эти понты в виде перехода на английский?

[@GloOmUnderN1ght]

Просмотры, как ты мог заметить (если б было желание думать), в основном иностранные, а значит во-1 больше прибыли с просмотра, во-2 совсем другое комьюнити, там не такие адовые хейтеры и скупердяи, больше позитива, больше возможностей реализовать свои поделки. Одни плюсы, про самостоятельное изучение инглиша забыл.

[@Александра-н6н9б]

+zOmb1e Да я понимаю все это. Большая часть текста ясна и понятна. Но это мне а знающих инглишь ( от и до) не так много как хотелось бы. Хейторы это болезнь нашей страны и я с этим не спорю, но нормальных людей больше и им интересно не только пялить тупо видосы но и понимать суть происходящего!

[@mirockswoodshop]

Тут все просто. Либо "русский миръ(тм)" становится привлекательным для блоггеров либо идет учить английский язык. Но так как он не стремится ни к тому ни к другому и все больше погружается в трэш то он идет в лес...

[@ihorstech]

:)

[@mirockswoodshop]

!!!

[@אלִיהאלִיהו]

это не вредно голыми руками масло наносить кто знает состав, сиккативы там всякие, отвердители, может перчатки надеть, я применяю дешевые одноразовые как не медицинские а как в парикмахерских или шавермах, копейки стоят, покрасил выбросил.

[@mirockswoodshop]

Люблю иногда испачкаться

[@אלִיהאלִיהו]

в журнале вудмастер как то встречал статью что столяра не редко болеют раком и связано вроде как с вдыханием опилок, я сомневаюсь, почему то в статье не опоминалось что столяра пользуются всякой химией, краски, лаки, морилки масла и тд, вдыхание и попадание этих веществ разве не может вызвать рак?

[@mirockswoodshop]

жизнь вообще штука вредная. от нее говорят умирают

[@adrianvalentin4281]

Good Job!

[@janhbrenna4264]

Congrats, thats looking very good ;)

[@mirockswoodshop]

Jan, thank you