I learned of Missouri tactical through your vids and finally installed grip and butt stock pad this weekend after them sitting for about a year. Wish I would've rewatched this vid. I managed to get grip on with brute strength and my 10-8 1911 armorer's tool as the "shim" to help get it on. Both feel great, can't wait to shoot with them on.
@Moondog2AАй бұрын
I'm glad you got it on
@joecrowsantibanez17333 жыл бұрын
For the grip use a blow dryer to make them softer it makes it so easy to get them on.
@goatzega30063 жыл бұрын
And soap will work as well.
@MrJmartinez763 жыл бұрын
Not a good idea to cover all the M lock holes. If you do it doesn’t give the firearm ability to breathe and it’ll get too hot in there. Just cover the part that you’re going to grip.
@Kilo_Twenty2 жыл бұрын
"laughs in quad rail"
@raiderswish Жыл бұрын
Didn't know
@garygallant53903 жыл бұрын
These same accessories can also be used on your iPhone.
@elendal3 жыл бұрын
picatinny rail for iPhone? Shut-up and take my money!
@garygallant53903 жыл бұрын
Cover on top rail will put stress on hinge.
@j0relle2 жыл бұрын
Boiling water + Windex are your best friends for grip install
@Moondog2A2 жыл бұрын
The grip is plenty elastic without heating it up. Almost too stretchy.
@robertharing70313 жыл бұрын
Interesting but I think I will have to pass I installed a Hogue hand grip on my G-17 model and it works well for my needs I do think that I would like to have the butt pad cover because even though it’s only a 9 mm it does kick a little after shooting it for a while. Thanks for sharing and bringing these accessories to our attention.
@stellayoung1210 Жыл бұрын
I use a hairdryer to heat it before installation makes it easier to stretch to put on
@Moondog2A Жыл бұрын
Good suggestion. Hope you subscribe.
@davidnorr25303 жыл бұрын
Amen Brother! Thanks Moondog!
@Matt-yi2ir3 жыл бұрын
Thanks for this video I have a keltec gen 2 sub 2000 and I clicked on your links below and bought these accessories for my sub 2000 and I love them. Keep up these helpful videos.
@Moondog2A3 жыл бұрын
Thanks for Subscribing. I just tested and posted a review of the new MoTac Recoil Buffer, I hope you picked one of those up too? kzbin.info/www/bejne/enK6fWSfoa6gna8
@CitizenKane113 жыл бұрын
Not sure if you’ve heard of MCARBO but they have a bolt tube cover, which works well btw. If you have the bolt tube cover along with the picatinny cover, will definitely prevent it from latching. I also suggest mcarbo’s recoilless charging handle.
@shino97973 жыл бұрын
Would you say the recoil less charging handle takes a lot of kick off?
@richardsmith41873 жыл бұрын
The only problem I see with the picatinny rail and M lock covers is they don't allow the barrel to cool down after extended firing and it does get warm. The Missouri Tactical butt stock is great. I changed the MCarbo butt stock pad out as it hindered pulling everything out the rear when cleaning as it is screwed into the Kel-Tec butt stock. I have a question regarding the kel-tec you are using for the demo, What is the L shaped metal piece running by the trigged and then slanting upward past the trigger guard ???
@Moondog2A3 жыл бұрын
True, I would not cover all the side vents. But it's not like you're firing a full-auto rifle ether. Unless you're iraqveteran8888 doing a torture test. ;-) Oh, that L-shaped thing is the Patriot Mag Release. It's a mag release-blocking device to comply with a dumb CA "Assault Rifle" law.
@richardsmith41873 жыл бұрын
@@Moondog2A OK, I didn't know what it was, but California now I know
@Moondog2A3 жыл бұрын
@@richardsmith4187 Yeah, CA sux for gun owners
@bangsnap26512 жыл бұрын
@@richardsmith4187 Yup. Reason #1047 why California sucks!
@jsr-uz3oj2 жыл бұрын
I used a hair dryer to get the Houge grip on my p365 it was very easy.
@Moondog2A2 жыл бұрын
Please subscribe. Just heat, no dish soap or plastic shims?
@Matt-yi2ir3 жыл бұрын
The grip covers work great on my beretta px4 storm as well.
@user-of4ew6zh9o5 ай бұрын
Spend your money on a trigger upgrade, feed ramp upgrade, optic and magazines. Just my opinion
@Moondog2A5 ай бұрын
I never understood the need to upgrade the trigger and feedramp from a stock KelTec until something breaks.
@kingwrld71615 ай бұрын
The link doesn’t work anymore could you provide us with another one
@Moondog2A5 ай бұрын
Thanks for the heads up 5% Discount Code: 05moondog Picatinny Rail Cover (black): motacpro.com/shop/ols/products/super-low-profile-rail-guard-set-of-3-for-picatinny M-Lok Cover (black): motacpro.com/shop/ols/products/m-lok-slot-cover Grip Cover (black): motacpro.com/shop/ols/products/a2-pistol-grip-sleeve Grip Cover (FDE): motacpro.com/shop/ols/products/a2-pistol-grip-sleeve-fde-color Recoil Pad (black): amzn.to/3xjprWB Recoil Pad (FDE tan): amzn.to/4aFAFTG
@newcreator30663 жыл бұрын
New sub here. Just purchased mine. I have some great ideas for mods, will post a video when done. Thanks for the video.
@Moondog2A3 жыл бұрын
Comment with a link when it's done. I just hope KZbin's algorithm lets you post a link to your vid. Sometimes it will just delete posts with video links in them.
@99Racker2 жыл бұрын
Wouldn't the side covers stop the air flow?
@Moondog2A2 жыл бұрын
Slow, not stop. And there's no reason to cover all of the side slots. Just cover the areas you normally hold.
@PepeDeezNutz2 жыл бұрын
Yes
@Arabeon2 жыл бұрын
I really enjoy watching your videos dude, so thank you. Wanted to ask a couple of questions regarding the Kel-Tec sub-2000 as I'm considering to buy one but heard not so good for long range. 1. How far did you shoot it? 2. Is it accurate?
@Moondog2A2 жыл бұрын
I shoot it mostly at 100yrds because that's the distance the public can shoot at, at my home range. For a 9mm non-match I can get about 3-5" groups shooting from a bench. I think in a video by Iraqveteran8888 he was shooting his Sub2K more than 300yrds.
@alvinweaver9692 жыл бұрын
Will still install on newest sub2000 Gen 3?
@Moondog2A2 жыл бұрын
Not in the new Cali edition. The grip fin makes most grip covers impossible to put on. Please subscribe.
@martinmurata3945 Жыл бұрын
What is that bracket covering your mag release at 6:30??
@Moondog2A Жыл бұрын
It's a Komifornia compliant accessory called the Patriot Mag release (Gen 1) kzbin.info/www/bejne/jaXEeIecg8SLjNk
@Matt-yi2ir3 жыл бұрын
Is it ok to cover all the openings with the m lock covers?
@Moondog2A3 жыл бұрын
It does reduce air colling of your barrel. But unless you're shooting 4 or 8 mags full auto in some firefight, that build of heat shouldn't hurt your rifle. I only covered up half (where I hold the rifle).
@Matt-yi2ir3 жыл бұрын
Ok thank you for the info.
@jolebole-yt3 жыл бұрын
Yes, if you want your polymer handguard to melt
@kellypark0073 жыл бұрын
Hot water my dude
@03sherrillm Жыл бұрын
What’s that extended mag release ???
@Moondog2A Жыл бұрын
It's a CA compliance accessory that I was trying on the Sub2K but I have since removed to try out a new grip. studio.kzbin.infoWtaGTfN_XVw/edit
@jonthornton49723 жыл бұрын
What are you using to cover the unused adjustable stock holes?
@Moondog2A3 жыл бұрын
Wilde Built Tactical who I bought it from did the setup. It's some sort of metal studs?
@jonthornton49723 жыл бұрын
@@Moondog2A can you send a close up picture of it?
@Moondog2A3 жыл бұрын
@@jonthornton4972 I think it's going to look the same as the close-up if you pause the video at 9:43 and at 9.48 or at 9:58 Also take a look at my other video: kzbin.info/www/bejne/faOun4urnpWtlcU
@kennethskrable272211 ай бұрын
Warm up the grip in hot water
@Moondog2A11 ай бұрын
That helps. Though this grip wasn't as difficult as my Glock 17.
@antdjones052 жыл бұрын
Subbed‼️🔥🔥🔥
@Moondog2A2 жыл бұрын
Awesome man, thanks!
@ThaGodfather360 Жыл бұрын
50 shades of FDE
@Moondog2A Жыл бұрын
Every company has their own version of what FDE looks like. I hope you subscribe.
@Moondog2A3 жыл бұрын
PROMO DISCOUNT CODE (expires December 20, 2020) 5% Off on Amazon and motacpro.com use Code: 05moondog
@wilcoxtactical3716 Жыл бұрын
Missouri Tactical just took shit made for other guns and tried to market it to Sub2000 owners without ever trying it. Kind of laughable. The MLok covers should be 5 spaces long instead of 3. The picatinny covers don't work at all for this role. Glad I didn't waste my money on their products. That grip is ridiculous. Not even the right shape.
@Moondog2A Жыл бұрын
It's an A4 grip cover. I was curious to see if it would fit on my S2K and it did?
@rogerkukuczka54663 жыл бұрын
Cheap Cheek guard
@rogerkukuczka54663 жыл бұрын
I used a 10$ Blackburn eco bike grip!
@PepeDeezNutz2 жыл бұрын
Your justification for pic rail covers are comical.
@Moondog2A2 жыл бұрын
Humor is mankind's greatest blessing. - Mark Twain
@anthonymoscon188 ай бұрын
So this is a absolute hot mess, the pad is cool but thats about it.
@doughboy76862 жыл бұрын
These are really useless upgrades a waste of money.