Awesome New DIY Tool Idea || Tool Hack

Hello Friends,
Today I Show You Awesome Idea Of DIY Tool. In This DIY Tool I Have Used 6" clamp and metal L- Channel. I Hope You Enjoy This Video. If You Like This Video Then Click On Like And Also Subscribe My Channel For More New Videos.
Visit My Official Website :- mistrymaketool.com/
* Follow Me On Facebook - / mistrymaketool
MUSIC :-
We Are One by Vexento / vexento
/ vexento
Music promoted by Audio Library • We Are One - Vexento (...
THANKS FOR WATCHING..

[@martinkesler5999]

My mom used to tell me "if you can't say anything nice, don't say anything at all". Thanks for your idea and sharing it with others who maybe can't afford to just go out and buy something. Keep sharing, there will always be some who will be grateful.

[@danburch9989]

Good idea for someone who doesn't know that bar clamps exist! Just use wing nuts so that you don't need a wrench to adjust it for longer work.

[@chrisk3195]

You are the kind of person that Saw Stop was made for.....

[@30eesh]

feel free to buy n ship him one .....

[@cfuentesjr85]

I always wondered "Who needs this damn thing"....... Now I know.

[@tonyholt90]

That's a clever idea ! Thanks for sharing !

[@katiesman7519]

I just love how he still needs the clamp to drill the holes in the angle 😆

[@alissonwdacruz5163]

Parabéns pela ideia video muito bom. Simples e muito útil.

[@euripidesparragarzon7551]

Es mas economico y rapido comprarlo nuevo , mucho trabajo para tan poco beneficio.!

[@genconex]

Pipe clamps are cheap enough, have more adjustment capability, and are safer. So...this is definitely a hack job and pointless.

[@Chris-pb3se]

Yup. Not too mention adjusting in 90% less time

[@solivier7983]

Pipe clamps not obtainable in South Africa. Broken g clamps are, however, especially in a large set construction crew. Great hack, thank you.

[@oldedrum]

genconex Ya beat me to the same comment! 🤩

[@rocketman475]

My son,..... Genconex, what troubles your delicate hands, and / or mind ? You could just as well omit the trip & $ for a pipe clamp as well. Call a tradesman and pay him to take care of it all. That way you won't get any callouses , nor strain your neuron.

[@lanceroark6386]

Don’t you think that Krishna is proud of him though?

[@MrUnderdog-vn3zf]

Pretty good idea! I'd use wing nuts instead of hex. No need for a wrench when readjusting!

[@antoniobatistalopesjunior3880]

Valeu por divugar a sabedoria....

[@kishowood1596]

حلوة ويا حبزا لو الزاوية اتعمل فيها قاعدة حديد لتصبح منجلة والله ينور بالتوفيق 💗

[@alexlu3806]

Спасибо за идею!

[@zacksrandomprojects9698]

Cool idea! I need to make a couple of these.

[@arquimedes3370]

Show, muito boa ideia irmão.

[@user-mp8og9uu8h]

Отлично!

[@jondeauxman]

Good job, you used several hundred dollars in tools to make a 5.00 pipe clamp

[@3melendr592]

He most likely did not buy the tools for this particular job.

[@andyboybennett]

@@3melendr592 He most likely made them, since he is all about home-made tools.

[@robtankbuster5215]

He must be in a third world country, no wait bar clamps are now made in third world countrys.

[@philipmaclarenjr.2004]

So you cant use your tools on a cheap project? What a stupid comment

[@c4b1eguy]

r đ

[@Brian-vc1oy]

Great idea! If you don't have a tool why not make it! That's what I like! A little more planning would help but it working for you!

[@josemauricioricoparra1410]

Genial idea. Felicitaciones. Gracias por compartirlo. 👏👏👏👏👏👍

[@romanoinmortal5581]

Buena idea muy práctico!!!!

[@renekrajewski8780]

Excelente trabalho 👏👏👏👏👏👏

[@bengalalonga7510]

parabens ideia de mestre.

[@maurosabino8888]

Sou do Brasil , gostei , ótima ideia

[@samuelolivar7683]

Que fascinante idea. Saludos desde Venezuela. Dios les bendiga siempre

[@mauricio0341able]

great, i broke one and this is a good method to fix it, thanks

[@dataluskazan4006]

lock watchers and wing nuts on the adjustable part would make it a bit easier to use but Very good idea good job

[@jayn9559]

You know when you think something is a genius improvisation, you laugh to yourself do it then say wow. This is what exactly what IAM talking about.

[@servantofyahawah1469]

Dont hate it has strength and adjustment. Good idea dont cost much. Nice job

[@hg4712]

What a genius 👍

[@yosiken32]

素晴らしい❗

[@daddydawg1902]

Interesting way to re-purpose a C-Clamp. I know it's cheaper probably to buy a Bar clamp... but adding the Base to support a project not too bad. In a Pinch..with some extra materials.. it's nice to know. Thanks

[@TerrapinCreations666]

Use more c clamps to hold it to the bench. Then you have something pretty cool.

[@joeldelacruz5017]

I got idea from that, cause my clamp was broken. Very good

[@neekuendukuswamy]

Bench press kaun sa company ka hai

[@alvimarrochadarosaalvim8018]

Sensacional!!!!

[@starlightengramA]

Thank you. A few more holes through the bottom would permit securing the clamp assembly to the benchtop or even the wall.

[@joseivaldalben839]

BOA TARDE ótima ideia parabéns

[@hasandilek92]

Is that a solsons pop spanner at 1:33. Had one for years, they are very handy.

[@josebayas8879]

Chevere bacansisimo y muy útil, voy a fabricarme 2

[@marlonsantos401]

Uma ideia muito boa, mas se colocar esse grampo em uma parte fixa e uma parte móvel correndo dentro de uma canaleta, seria mais prático; estou falando isso porque eu fiz uma!

[@eduardolaurido8281]

Da hora top !!!!

[@miltonpinheiro2971]

FANTASTIC

[@-slemantech6136]

Well done👍🏻

[@saviocavalcanti1617]

Nice idea! Hugs from Brazil!

[@eduardalbertov7640]

Very good idea, thank!

[@clyde8759]

That's stupid.....buy a bar clamp....cost about the same

[@tomcanham9218]

Clever!

[@theeabster1983]

I love the wrench

[@antoniotroche2176]

Excelente idea .

[@darioromano5324]

Simpatico... metodo semplice ed efficace

[@johanrynjah8241]

That's a great alternate use of a broken C-Clamp, the L-Bar you use there will twist when clamping large objects, using a T-Bar instead will give you more clamping force and stability. Great constructive innovation, Enjoyed the whole video. . Greetings from Meghalaya.

[@johndias6614]

Darn, I was hoping to see him try to weld cast iron to mild steel...😂😂😂 I would suggest using a precision tool like a SQUARE to line the movable jaw up square with the angle stock. I personally use Pony clamps I found at the flea market for $5.00 each, but some people live in places where one has to make do with the materials at hand. Lining the holes up and spacing them exactly 2 inches apart will give this project more adjustment points. Would I make and use this...no. I live where good tools are plentiful both new and used, and I can afford to buy good quality tools.

[@jimmychambers1501]

That's not hard to weld

[@gundamfan2020]

You can weld it

[@warewolf2304]

@@jimmychambers1501 if you know what you’re doing and have the right settings absolutely, if not you can absolutely royally fudge it up.. I’ve seen’t tit I said I’ve seen’t tit

[@artpfox1251]

muy buena idea gracias

[@brucecampbellforpresident1393]

I think I bought one of these about ten years ago in a set of three sizes .

[@larrysullivan6536]

Brilliant so easy made

[@frankxia1978]

awesome!

[@fuuastpk]

Use T shape angle iron to become more stable with surface.or use 3 inch angle iron piece weld behind the facing.

[@jagadishchandrakanaiya8781]

Thank you so much for your one of good idea

[@martahej]

Super idea👍

[@randomwrestlingthemes524]

awesome adjustable C clamp

[@carlwood2578]

Excellent! Now I don't have to buy bar clamps. Keep it simple maximize on what you got.

[@Explorador65]

😀👍 in T iron for more stability ?

[@javierdiaz17]

Excellent tool 👍👍👍👍👍👍

[@luzmagana3530]

Gran idea 👍

[@saulsandoval2313]

I dig this idea. 👍👍

[@roberto.h.g.3591]

Super video Master****👍

[@satiminsatimin673]

Bagus mas cepat murah namun sangat bermanfaat terus berkreasi.

[@user-uu9qd1nq6g]

Очень мудро ( спасибо)

[@rigsby-i-am1050]

Complete junk! Just go out and buy a sash clamp.

[@nickpallotta4834]

You made a clamp or a vice that already exists with improved features and technology. This is definitely a hack video.

[@elsopeixotodeoliveira7357]

Bem engenhoso, parabéns

[@cyrilrogan4069]

I haven't got the tools to make that tool!!! 😂😂😊

[@elijahf111]

Sooooooo a less convenient less versitile pipe clamp

[@jamesha175]

wow! you should make an instructional video.

[@sonnynguyen8012]

Great idea. Thank you.

[@neil5219]

nice - you made a sash clamp

[@drracer1719]

U can use F clambs instead of cutting ur G clambs

[@antonioaugustolopesdasilva6494]

Great idea ! Congratulations from Brazil.

[@corneilcorneil]

Need a fiew improvements, but nice idea!

[@RecoverTool]

very creative

[@harryfonseca1869]

Awesome! it would be useful to drill some holes in the bottom of the base to atach it to a dril press or to a work bench, don't you think?

[@ltmcovers8069]

Just buy a harbor freight c clamp and it will break it half for you with little effort

[@gundamfan2020]

Lol I've had this happen to me ha ha and a 1ton bench vice

[@venianadrakabula131]

Cool idea

[@gregoriomangiarella9449]

Compliments. Nice idea

[@bottayouseff8409]

Nice brain fantastic idea

[@timo105317]

Wow!

[@marcosferreira2050]

Idéia fantástica, parabéns

[@aaronhaines5569]

Congratulations, you made a less efficient bar clamp!

[@angiefav1847]

Love your idea very cool

[@ISTOmaker]

functional, very good.

[@jj4741]

Excellent. 👋👋👌👌

[@zeyamisbah9824]

Brilliant job bro

[@eternalfizzer]

Brilliant! I love that you don't need a welder to make this.

[@MrAmazingWorks]

good

[@AlphaTroniks]

Wow.. !! Day by day I'm growing fond of your videos !! They're simply amazing!!

[@renatomateo3921]

Sinasabi ko nayy

[@venianadrakabula131]

Thats cool

[@epenaloza52]

I think i just found out my key clamping hack to my diy granite cart

[@baton689]

Bonne idée !

[@user-nv7nu9wn2e]

Good Good Good 👍

[@claudinezsilva3976]

Parabenizar pela ideias excelentes deste canal ....