Mitsubishi XPANDER Controls and Instruments Explained Part 1😊✌

[@tonnettesalmin2298]

Very informative and useful. Thank you!

[@Anahawnons]

Ayos sir, kumpleto, very helpful. Maraming salamat!

[@mharestrada9014]

good video . dahil ito ung balak namin na bilhin na family car :)

[@kenmiguelaranas759]

Thanks for the explanation and guide...

[@ckpalaris7772]

vey helpful paps. Sana gumawa ka rin ng video para doon sa controls sa steering wheel. Salamat!

[@rocker843]

thanks sa explanation😀

[@chiefmakenista5399]

Good explanation migo...thanks

[@RodelPantig]

Thanks po dito!

[@ariestynnestella6935]

Walang part 2 paps?

[@justgotlucky2740]

Good day sir, pano activate yung signal sound ng reverse? Pansin ko kasi walang sound xpander gls AT ko pag nagrereverse ako. Wala din auto lock ang doors pag nasa certain speed kana. Thanks!

[@basimjulian2652]

Good pm po. Sir tanong ko lang po kung pweding i set ang max kilometer nya at mag sounds para may indication na overspeeding na? TIA

[@dennissevahc7126]

hello sir. normal lang po ba sa xpander na may mag blink na security lock sa gilid nang display. naka off napo ang engine at naka lock na lahat pero pag sisilipin mo sa labas may nag bi-blink na lock symbol? normal lang po ba yon sir?

[@emilosunga2229]

Boss alam niyo po ba kung pano pag walang sound yung dashboard kahit nka on yung sa setting? Wala rin tunog ang turn signal lights pati hazard

[@michaelcastro3763]

Sir tanong lang po, ano po yung wag iiwanan ng matagal na naka on ang system dahil madidiskarga ang battery? Yung engnie po ba yon sir?

[@masteraworkz8820]

Good day sir ,ung engine po naka "off" means hindi po umaandar pero naka "On" ung system...in automatic transmission you can switch "ON" the system by not pressing the brake pedal then press the push start button twice.. 1.) ung unang press niyo sa push start button without pressing the brake pedal will switch "acc"-accesories... 2.) ung second press niyo sa push start button without pressing the brake pedal is switch "ON" 3.) ung third time you press the push start button without pressing the brake pedal will switch "off" the system thanks

[@michaelcastro3763]

@@masteraworkz8820 thank you sir 🙂

[@capt.philtv]

Sir tanong ko lang Po Anong fuse kaya Yan sir d Kasi umiilaw sakin Nyan sir

[@limah888]

Up and down or side to side button saan po kapag nasa setting na?

[@masteraworkz8820]

Good Day sir, ung info button sa left side po ng panel display ang location for xpander gls sport and xpander gls At....wala pong up and down side to side button.1.)use info button to scroll and select display/function setting....2.)press and hold for 2 secs. to go in sub menu and to change setting. sa xpander glx plus at and xpander glx manual transmission use the rheostat button near speedometer. thanks

[@limah888]

@@masteraworkz8820 thank u very much sir...marami kayong nattulungan sa vlog nyu. God bless!

[@rambogeralde2788]

boss normal lang bah yan.. nasa gitna ung temperature?

[@masteraworkz8820]

Good day sir, yes normal po na nasa gitna ung bar graph gauge... incase po na mag ka problema ung ating engine cooling system/overheating-mag bliblink po ung coolant temperature logo na nasa gitna as early warning para maitabi natin ang sasakyan sa safe na lugar at ma check kung ano ang problem.kaya pay attention po lagi tau sa ating panel display while nagdridrive. thanks

[@rambogeralde2788]

@@masteraworkz8820 expander din kc minamaniho ko master.. at dag2x ko po. kc pag matulin na takbo ko master tapos pag mag break ako.. mag ba vibrate ung manobela ko.. ano po ba deperensya nyan master?

[@masteraworkz8820]

@@rambogeralde2788 Pinag palaang araw sir, ilan n po milage ng sasakyan? meron po bang recent aintenance sa brake system? bukod b sa steering wheel nag vibrate, observe dn kung sa brake pedal may nararamdaman dn po ba kayong pulsation or parang tumatalon ung brake pedal habang tinatapakan niyo? 1.) dito muna tau sa walang gastos-ung pwede tau ang gumawa.. *Paki check po kung properly inflated ung gulong. check also kung pantay ang wear ng gulong sa harap.pag d pantay ang tire thread wear pwede po rotate ung gulong. *paki check din po baka may maluwag n bolt and nut sa gulong, steering and suspension-higpitan then observe kung mawawala ung shaking ng steering wheel. kung dnawala next... 2.) kung meron kau recent na maintenance sa brake system which is ito lang ung change point na ginawa sa sasakyan, compare b4 and after kung nangyari ba ito b4 or after ng maintenance bago magshake ung steering. please have it check with qualified mechanic baka may maluwag sa brake system or improper installation. 3.) check wheel suspension, alignment and balancing? 4.) (REPLACEMENT OF DAMAGE ROTOR AND BRAKE PAD IN FRONT WHEEL)base sa experience ko.which nangyari sa sasakyan ng isang kaibigan.nagvivibrate ung steering wheel when brake pedal is pressed kasi napudpod na ung brake pad kaya nakain na ung brake rotor/disc which result in grooves and un even surface ng brake rotor.The un even surface of rotor when clamp by brake pad will cause the vibration on steering wheel. solution:we buy and replace with new brake pad and brake rotor kc hindi na kaya ung re-surface ung rotor.and after replacement everything is back to normal... ano ba ung brake rotor-eto po ung part ng brake system sa gulong which is rotating and when brake pedal is pressed is ito ung iniiipit or being clamp ng brake pad para huminto ung gulong sa pag ikot.so kung hindi n pantay ung wear ng surface, may mga grooves, or bended ung rotor will cause and send vibration to steering wheel. paano nga b nadadamage ung rotor- #driving style ng driver- kapag ang driver mabilis mag maneho at madalas mag sudden brake or ung biglaang preno - will cause more heat between brake pad and brake rotor(mabilis mapudpod)kaya in the long run will shorten ung service life ng brake pad and rotor. #driver na mahilig tumutok sa harap na sasakyan kaya pag nag preno ung nasa harap n sasakyan biglaan dn ang pag preno. #mileage ng sasakyan i suggest have your car check with qualified mechanic for safety and ask mechanic' recommendation- based dun sa visual inspection/assesment niya..sasabihin nmn ng mechanic kung need na palitan or pwede pa ung part ng sasakyan.para mapag handaan din ng budget. thankz

[@rambogeralde2788]

@@masteraworkz8820 10k plus pa po master bago lng po..

[@rambogeralde2788]

@@masteraworkz8820 dati pa yan sir pag kuha namin sa Mitsubishi.. kala ko kc normal un.. kc pag diniin mo ng tudo yung break mawawala nman cya..

[@romywong7421]

Ano at saan ang pinipindot mo pra mag iba iba lalabas sa panel

[@masteraworkz8820]

Good day sir.meron pong info button sa left side..un po ung press niyo para ma view ung setting sa panel...thanks

[@limah888]

Paano po mag up and down button?

[@jomarkopada2541]

Good day Po sir...nawala Po yong tunog nya kapag pinipress na Po yong start button..Ani kaya possible nangyari?