Mix SILICONE And SOLVENT. You Will Be Amazed With The Results

Hello everyone! You are watching video "Mix SILICONE And SOLVENT. You Will Be Amazed With The Results"
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creatio...
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#tipsandtricks #diy #silicone #diyprojects #handyhacks

[@rubberdub5269]

Could you use isopropyl alcohol as a solvent with the silicon

[@AmazingSmart-ngth]

"I'm amazed at how effective this silicone and solvent mixture is! Thanks for sharing such a practical DIY tip. It's great to see how easily accessible materials can be used to protect and maintain our tools and vehicles. Looking forward to trying this out myself!"

[@somejerk1575]

Yes. when the solution is applied to a surface the isopropyl alcohol would evaporate off leaving the thin layer of silicone. Solvent's like alcohol or paint thinner should be able to dilute silicone into a consistent liquid state. The applications for this would be limited though. A thin layer of silicone wouldn't last long in direct sunlight, this would be better suited for bathroom or kitchen projects inside a home.

[@LiuDienNuoc2024]

Hiii

[@LiuDienNuoc2024]

@@AmazingSmart-ngthI like ❤❤❤

[@LiuDienNuoc2024]

❤❤❤

[@LiuDienNuoc2024]

5:03 The video is worth watching, thank you for sharing

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@LiuDienNuoc2024]

@@creationholic101 yes wish you happy

[@davidkiss6624]

Magyarországról Kalocsa nevű város környékéről nézem ezt a videót, méhész és autodidakta asztrobiológus kutató vagyok!

[@creationholic101]

Thanks so much for watching our video. Wish you all the best

[@etutub]

Hello from Italy! Thanks for sharing this very nice trick. I usually buy silicone lubricants which are quite costly, I suspect they're not much different after all. Anyway, as someone else also wrote in the comments, I wouldn't be too keen on using this on thin rubber before a long-running test. I hope people will keep on posting here about their experiences, also with different solvents; I'm sure I will. Keep on with the good stuff on this channel! I love it!!!

[@creationholic101]

Thank you for sharing your feedback. Have a good day!

[@kRhD969]

酢酸ブチル溶液（という日本語訳で良いのか確かではありませんが）は日本では免許がないと取り扱いできないかもしれない。少し調べた限りですが...。だとしたら残念だ～。

[@79CreativeTechniques]

❤❤❤

[@creationholic101]

Butyl acetate ( CH3COOCH2CH2CH2CH3 )

[@YouChwb]

For sealing the back of the sink, start behind the tap and work your way outwards, and repeat going the other side without those silicon extenders.

[@creationholic101]

oh, you have a great idea. Thank you for the great advice. Please let me know what topic you want to see in my next video!

[@BeeeHonest]

Don't put that on your bike tires, because of their slim profile, the solution can get onto the rubber surface where the rubber meets the road, which you will lose traction.

[@79CreativeTechniques]

6:54 😂😂ok

[@creationholic101]

Hello! thanks for your comment. Wish you all the best!

[@79CreativeTechniques]

@@creationholic101 👏👏👏🩷🩷

[@etutub]

I believe friction will wear away the solution from the tread in a matter of minutes. But the advice may still stand for those first minutes, especially on wet or otherwise slippery grounds. A much worse problem you may experience is reduced friction at brake action, but that also might go away quickly.

[@creationholic101]

thanks for your comment. Wish you all the best!

[@ebrahimi_shahin]

It was very creative and practical, thank you ❤

[@creationholic101]

Thank you! 😊

[@Tips24H-rj9pq]

good video i like it very much

[@79CreativeTechniques]

Yes I like

[@creationholic101]

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

[@79CreativeTechniques]

@@creationholic101 ok thank you for much

[@rgrocha]

I loved your videos, greetings from Brazil! 🇧🇷 😊

[@creationholic101]

Glad you like them!

[@ipfreely9245]

wow i'll definitely give this a try, it's got my "SEALE" of approval. 😎😊👍

[@LiuDienNuoc2024]

Good

[@79CreativeTechniques]

Kaaa

[@creationholic101]

Glad you like them!

[@LiuDienNuoc2024]

@@creationholic101 yes👏👏👏

[@TranTrung-x3s]

nice

[@creationholic101]

Thank you! Cheers!

[@araztab3512]

where are you from

[@creationholic101]

Thank you for watching the video, I'm from Vietnam

[@Jari1973]

You can't buy butyl acetate here in Finland.. will any other solvent work.. 👍

[@hanni9671]

Testbenzin funktioniert auch. (Hatte noch ½ L an Restbestand) Hier in Deutschland teuer, falls man es überhaupt noch bekommt. Habe es heute die Mischung mit reinem Aceton gemacht. Ging auch. Wer hat noch eine gute Idee?

[@Jari1973]

@@hanni9671 Thanks for the answer 👍 In Finland you can get white spirit cheap.. as well as acetone.. Sorry for my bad German 😁

[@somejerk1575]

paint thinner/mineral spirits

[@creationholic101]

@hanni9671 Vielen Dank für die Bereitstellung der Informationen

[@79CreativeTechniques]

6:54 Oh that's great, man

[@creationholic101]

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

[@79CreativeTechniques]

@@creationholic101 ok 👌🏻

[@itsnerfordartzone5156]

How much of each should i put

[@creationholic101]

Sorry, I didn’t quite catch that. Can you repeat the question for me please?

[@Ruby233]

Esistono tanti tipi di solventi, quale hai usato nello specifico?

[@creationholic101]

Butyl acetate ( CH3COOCH2CH2CH2CH3 )

[@Ruby233]

@@creationholic101 grazie

[@CreationTipss]

GOOD GOOD !!

[@creationholic101]

Hi. Thanks for your comment. What idea is your favourite?

[@nix0849]

各用量も使用品の説明はないのですね！シリコンはどのタイプですか？！最後は塩水ですか？濃度は？量は？何も分からないので再現は出来ませんね！

[@creationholic101]

私は透明な白いシリコンを使用します。芳香ガソリンとの比率は 1/5 ですが、アセトンを使用することもできます。

[@nix0849]

@@creationholic101 シリコンはノーマルから建築用と様々な種類があるので！芳香ガソリン？ホワイトガソリンの部類ですかね？！アセトンが使えるんですねなるほどです！

[@creationholic101]

yes it belongs to white gasoline or you can use acetone

[@jfruser]

I would not put such a solvent on my tires.

[@creationholic101]

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

[@andypickles5741]

Bit of a stupid idea to put your solution in a labeled drinks container.

[@creationholic101]

Sorry, it's a disposable plastic bottle, you can throw it away after you're done using it

[@ricardonunez1311]

Cual es la diferencia entre hacer esa mezcla y utilizar Barniz o Clear

[@creationholic101]

No tengo ninguna prueba para comparar. Si tiene algún hallazgo nuevo, compártalo conmigo.

[@eviardiyulsa7567]

🇮🇩❤

[@creationholic101]

Thank you! Cheers!

[@peropratljacic319]

Iz cĝ

[@creationholic101]

Thank you for watching