MJX Hyper Go 14301 Tear Down w/ 1/10 On-Road Wheels Red Bull Edition 1/14 RC Car (3S Run)

[@ladrao777]

Great teardown!!! I have the rally version and I agree that it is one of the best in its class for 2023.

[@customtoyrevolution]

thanks

[@techntricks1194]

So much detail level of disambly, Great work

[@customtoyrevolution]

Thanks

[@lopieslopezpm]

I just used your video to grease up my diffs. Wow they were dry just like yours. Thanks.

[@customtoyrevolution]

I didn't mention before: After adding grease, the car run butter smooth and so much quieter

[@pantag2]

@@customtoyrevolution What type of grease do you use for the gears?

[@offsetrc]

Definitely looks awesome with the new livery nice I like it good job with that 👍

[@customtoyrevolution]

Thanks a lot!

[@elbeezy382]

Looks even better with those decals... this is such a cool little platform. I think 1/12 would solidify this ✌🏾

[@customtoyrevolution]

Agree

[@-xirx-]

Giving me lots of ideas!

[@Schmidt3850]

Great little truck. Got one to tinker around with in front of my house when I get home from work. The down flaw is the maintenance. That's absolutely ridiculous what you have to do to maintenance the diffs. I thought my Arma 3s and 4s trucks were a pain to maintenance the diffs. This truck is far worse by a longshot. I will just wait till a diff goes bad before I rip it apart completely to do diff work on it.

[@customtoyrevolution]

Thanks for sharing

[@totofranco9074]

hello the video and really coolll we can see what you are doing and its great help I have the mjx hyper go 16208 which is going really well a disassembly video of this model thank you

[@customtoyrevolution]

You're welcome

[@markoconnor3567]

Hi there hope all is well,just got one of these so very helpful video. Just broke one of front drive shafts crashing into a curb testing out new 3s battery in it (our roads very narrow over here in England, like quarter size ot what you driving yours on,my excuse anyway) Trying to work out where the little rubber washer goes when remove front arms at bottom to ge5 to drive shaft,thought I'd take other side of to see,but off course fell out as dismantling it before seen where goes. Thanks for video

[@customtoyrevolution]

Glad it helped

[@markoconnor3567]

@customtoyrevolution yeah should help if ever need get to certain parts, but unfortunately one of the few pieces you didn't strip was the piece I was hoping you would but you didn't ha ha. Watched another of your videos mentioning size of the front drive shafts to wheels and must be doing something seriously wrong to break one as so big. Crashing head on into curb and probably fact close to freezing wouldn't of helped ha ha,mad thing is,knew it would happen so knew shouldn't drive outside the house on road,but thought quick minute to check new 3s batteries won't harm but turned into 15 or so minutes as get carried away far to easily. And you mentioning the spare fan if using 3s so just put that on so thanks again, Take care and have fun

[@ofromda860]

Nice breakdown... but you greased pinion and spur gear but didn't add grease to the diffs? They come with just a dab of grease or bone dry!

[@customtoyrevolution]

Got lazy ☺

[@shadyhazza]

have you removed the rear hubs? one of the shafts has a crosshatch on the end of it (M2523), instead of being held in with a grub screw my rear hub cracked the first week of use, glue is holding fine but i want to be able to change it and i'm not sure how its held in

[@highduck420]

I've removed mine, upper is a screw, the lower you need to drive it out, it's pressed in, it's a pin.

[@shadyhazza]

​@@highduck420 thanks, i've tried to remove it unsuccessfully - didn't wanna damage the arm so i stuck with glue. i'll get it out and in a vice to drive the pin out properly

[@daveanderson8404]

thanx for this vid, i just grabbed one and was looking to grease her up.

[@customtoyrevolution]

Enjoy it

[@25THGable]

They put the front diff with 50k oil (i think it said) and the rear with butter something to do with handling

[@customtoyrevolution]

No sure what weight but they have it well turned. I do have to stiffen up the suspension due to the higher speed from 3S lipo

[@jamesbrooker6508]

How do you get the rear of the red middle bar off the car mines completely stuck and glued in so much by factory 😢

[@customtoyrevolution]

I usually use a soldering iron to heat up the screw because of the plastic. For all metal parts, I use a kitchen torch

[@misterBamable]

question, can you make a video explanation about the G3 Gyro of mjx 14301? we have a lot of problems with it, seems like there are 3 positions. higher the percentage the slower the 14301 responds. is it possible to fix the ends of the wheels in the gyro? Can't find instruction manual anywhere. maybe you can make a short explanation video? thank you! keep it up! nice channel!!

[@customtoyrevolution]

The little nob has infinite position. Power on the car and swing it left & right to see if the wheel turns on it's own. Adjust it to your driving style. You can even start with 0%/off as this can is very stable

[@kevingalea92]

I think with the bigger wheels you really have to keep her going straight. I really like how she looks with bigger wheels

[@customtoyrevolution]

Lower the suspension as I did we do the trick

[@enricomiceli5517]

Thank u so much for this, also it is a 1/14, also claimed from the seller, sadly not a 1/10

[@customtoyrevolution]

It is 1/14 as described. You probably misread the 1/10 tires part

[@enricomiceli5517]

​@@customtoyrevolutionoh yes... sorry, quic question! Is that small hole in the esc made for the program card or you can put a esc fan cable there (u know , the small white ones there do not go in the recoever) ? Also, does a 13 cm in lenght 2s lipo can fit (not perfectly, but fixed with straps)?

[@giorgiotibaldo]

Did you cut the fenders with scissors or a cutter? i want to do the same with mine...i bought 3s battery and amazing metal wheels 1/10 scale so are much biggers than standards and i have to adapt the space between tyres and fenders...thanks

[@customtoyrevolution]

I used cut it with scissors and finished with Dremel for a clean look

[@giorgiotibaldo]

thank you i already did this morning...a question ..Don't you think it's better to set the shock absorbers a little bit harder to avoid that the body go down to touch the wheels expecially during acceleration with 3S battery?? i have set the ring absorer 4mm shorter and 5 mm on the rear too,but i think is not enough ....let me know please..

[@customtoyrevolution]

@@giorgiotibaldo I don't remember how much shorter I adjusted. P.S. don't forget to account for tire ballooning when cutting the body, I am sure you will find out eventually

[@51im]

Are the metal wheels heavy compared to the plastic ones

[@customtoyrevolution]

yes, it's a trade off between performance (light) vs stability (heavy)

[@thegian6250]

I used to strip the screws of the diff cases very easily on the previous version. Did they use the same very thin screws in these new diffs? Thanks for the video.

[@customtoyrevolution]

I have my share of strip threads in the past, not just diffs,, the chassis also. I don't remember if they are the same, but surely very small screws indeed.

[@thegian6250]

@@customtoyrevolution Any suggestion for this? Its difficult to find other options for this size, flat head screws.

[@customtoyrevolution]

@@thegian6250 You actually strip the screw? I guess superglue it all together until it fail, then get a new diff

[@thegian6250]

@@customtoyrevolution Yes many times

[@brockl1269]

12x2mm protek hardened screws@@thegian6250

[@shadyhazza]

the larger wheels will make the final gear longer, i.e. the car will go faster 55mm to 63mm is 14% larger its like changing your pinion from 22 to ~25 tooth perhaps care should be taken running on 3s, the controller does have a 70% power switch. or if someone melts their gear, report back here :D

[@customtoyrevolution]

That's the point of upgrade, speed and more speed! Happy to report after a few sets of tires, this car is still in one piece. As I already mentioned in my videos, the electronic and powertrain of this car can handle these upgrades with ease with rooms for improvement.

[@shadyhazza]

​@@customtoyrevolution did you cut the chassis at all? i ordered the same wheels and rally blocks you did, the rally blocks don't have a chance to fit without grinding off a bit of the chassis, but they work great on the 124008 for loose surfaces

[@billgs]

Great video!!! I have 2 questions: They reccomend using CA glue for fixing tires to RC rims, but on all the videos the rims are plastic. What type of glue do you reccomend for aluminum rims? 2. Does the car drift well with the larger wheels?

[@customtoyrevolution]

CA /Superglue works fine. Be sure to clean the wheel with alcohol or acetone. Some would even clean the bead of the tires. It won't affect drifting as long as you use hard plastic tires, but then again, this car is not designed for drifting.

[@Hannsom7]

hey bud! i just got this rc car too !! when i charge the 3s battery the charger light just stays red does yours do the same thing ? them wheels look so goood!!

[@customtoyrevolution]

Don't know about the included charger. Always use my RCToolKit charger. Those aluminum wheels turns out to be very good, to the point I can recommend

[@pantag2]

@@customtoyrevolution What 3S Lipo did you get for it? The one they offer as it is short and fit in there? Will other 3S lipo batteries fit?

[@kevingalea92]

Where the heck did you buy that pack of tires i so need to do the same lol

[@customtoyrevolution]

Amazon

[@sammutphil]

Help if you can. My son just got one of these and the steering stopped responding. When we turn on the RC, steering works for a moment then beeps and doesn't steer any more. no issues with forward or backward motion. Any ideas? Thanks.

[@customtoyrevolution]

Have your son pop out the linkage bar connecting to the servo, check to see if anything blocking the steering. If it moves freely, you have a bad servo, contact your seller or MJX directly and they should send you a replacement for free.

[@sammutphil]

@@customtoyrevolution thank you

[@Takeover738]

Do you have recommendations on a alternative 3s battery that fits this car? The one mjx sells is like 40 bucks comes with charger which i dont need

[@customtoyrevolution]

I just go for the cheap Lipos since it is budget. All their C rating are over rated. Any 1600 to 1500mAh 3S Lipo short pack will fit

[@galeryvideo5802]

Help!!! Please give me a way so that I can use a tire size like the tire size you use.

[@customtoyrevolution]

Search up how to cut lexan body, cut a little at a time until the wheels are cleared. Take your time.

[@shadyhazza]

thanks for this info, the ability to run aftermarket wheels was important for a 3s wheel chewing beast i'd like to know if anyone has figured out how to avoid the wheel arches getting eaten, such as raising the body oh why did they go with a 55mm diameter on a 12mm hub..

[@customtoyrevolution]

rising body won't do, you have to cut the body

[@plesleyporfirio6471]

Eu cortei da minha assim que chegou o colocar minhas rodas 1:10 e ficou perfeito com calma e carinho de pouco em pouco chega ao ponto certo e limite

[@plesleyporfirio6471]

Muito bom o vídeo e ainda tem uns e outros que falam que não necessita engraxar, ao meu ver há necessidade para uma maior vida útil de todo o conjunto até mesmo interno nos diferenciais nas aranhas internas só não sei ainda o peso correto do silicone para uso internos nos diferenciais até por que externo pode ser usado a graxa branca náutica e fica ótimo 👍🏻

[@customtoyrevolution]

Thanks, grease is important. These are not seal diffs, you don't want to use silicone unless you go up to 1 million wt of something.

[@kjetilpedersen583]

Really nice Car 😊I have the same it's Soo good to drive and Drift 😊

[@customtoyrevolution]

Nice 👍

[@kjetilpedersen583]

@@customtoyrevolution Oyyeee Really nice 🙂 I have the New 14303 Rally edition.The first Lisens Rally Car from Mjx Hyper Go 🙏 Almost the same different diffuser back and front.The rest is the same.Its so fast on 3s Lipo.

[@couger3p]

What tires are you using with this? I soon will be upgrading my 14301 and I want to get more easily available tires. I'm also going to try to use the off road truck arms, shafts and steering arm to widen the track width. Thing rolls over way too easily on 3S

[@customtoyrevolution]

Tires are in the description. This one is also my cheap go-to on-road tires www.amazon.com/gp/product/B00ID51PT4 Good suggestion on using the truck arms setup, do they fit?

[@younghandsome225]

Far as the tires do I have to glue the rubber and foam to the rim or will they just slide on and stay I'm new to the rc hobby

[@customtoyrevolution]

most after market tires require superglue, and must do

[@farmoboy83]

do you know if the diffs and spur gear are the same as hbx 16890?

[@customtoyrevolution]

No idea

[@teddyaugys5395]

Hey do you know what wt oil is in the shocks? I redid mine with 90wt and it doesn’t seem right, I’m new to all this

[@customtoyrevolution]

I am afraid not. I usually just replace them with thicker cheap silicone oil

[@johnkudla7771]

Did you have to do any mods other than trim the body to fit 1/10 wheels?

[@customtoyrevolution]

I lower the suspension to keep the car low to the ground. You can watch this kzbin.info/www/bejne/aYClfpiPlJ14p5Y

[@marcusperryman4583]

hey nice video thanks for sharing. where can i get the stickers and wheels you put on yours?

[@customtoyrevolution]

Contact me at [e-mail]

[@customtoyrevolution]

Wheels are from Amazon. Links in the description

[@danielmantio7905]

Can this new rc car wheels fit with the ud1603 just by using a 12m hex adapter

[@customtoyrevolution]

yes, I tried it. You need to mod the shocks to lower the CG if you are thinking of or already have increased it's top speed.

[@danielmantio7905]

@customtoyrevolution thank you mate been a long time doing this with the nitro cars

[@SmoothbassmanStudios]

Did you upgrade the plastic hex's behind the tires to aluminum?

[@customtoyrevolution]

Not yet, but will do once they fail

[@johnfavors3852]

Hey bro do you think you could add a bigger pinion gear on it..?

[@customtoyrevolution]

You could if you modify the motor mount

[@taufikfirmansyah5361]

Have you tried a m chassis tire on it?

[@customtoyrevolution]

Good suggestion, it's 60mm in dia, only 5mm larger than stock, might just work

[@BigDuke6ixx]

Where did you get the Red Bull decals?

[@customtoyrevolution]

DYI. You can support my channel and get it via www.ebay.com/itm/256084755671

[@customtoyrevolution]

MJX contacted me today and said Version H14MK will be a bit different than 14301

[@Tamichtube]

Did they say different how? And also could you measure how long the battery tray is? Thanks

[@customtoyrevolution]

@@Tamichtube Reps said program - no detail given

[@dualtrondreamteam6811]

Is the m14mk goin to be another drift truck?

[@reboldalralp3575]

The diffs cups is metal?

[@customtoyrevolution]

yes

[@luisLP5752]

Based on the specs, your tires are 63mm. Do you think that you can fit tires with a few more, mm? There's some offroad tires that seem to be 68mm and some rally-ish that are 66mm. Do you think it's doable? I'm not too sure, but I think that the tires that your wheels came with are 70 mm

[@customtoyrevolution]

I personally wouldn't fit a bigger tires than 65mm. You will need to trim more from the body and also need to account for tire ballooning. Yes, the tires come with aluminum rim is 70mm and too big. I also need to lower the car to reduce traction roll, video releasing tonight

[@luisLP5752]

@@customtoyrevolution thanks, I'll follow your advice

[@chickenagogo]

Do all gears and diff are prelubed from factory?

[@customtoyrevolution]

Gears are lubed very lightly, fine as RTR, but need to add more from my perspective. Diffs are oil filled.

[@chickenagogo]

@@customtoyrevolution thank you for your answer. Can the diff oil replace with some white lithium grease or just let it with the diff oil? Maybe i do some wrong thing for a long time 😨

[@customtoyrevolution]

@@chickenagogo I would not recommend. You should probably google the application of diff oil.

[@jsefrcop.d.7103]

What diameter tires did you put on it?

[@customtoyrevolution]

65mm on-road slick rubber tires w/ Aluminum rim

[@benihamdani5871]

Are you cut the body to make the tires fit ?

[@customtoyrevolution]

Yes, you have to

[@taufikfirmansyah5361]

​@@customtoyrevolutionI want to always put 1:10 tires on my 14301. But it is very difficult to find replacement body parts in Indonesia if I have to cut the body

[@sTuPiDiScOoL_]

Link to decals please bro uk delivery 🙏💚👊

[@customtoyrevolution]

I posted a purchase link in the description, ebay handles the shipping, please let me know how much they charge for shipping to UK

[@rwinlund]

you dont grease you spur and pinion knuckle head!!!

[@customtoyrevolution]

I always grease them, it's so common I don't usually mention nor show on my videos

[@-Astro--]

Wow you absolutely ruined a great RC car.

[@customtoyrevolution]

I feel sorry for you

[@-Astro--]

Off to a decent RC channel as this is utter garbage.