MK DSG build (part 2) shimming and motor depth.

shimming video link: • how to shim a gel blas...
SHS DSG gear: s.click.aliexpr...
SHS gears: s.click.aliexpr...
Please support my channel by buying me a coffee: www.buymeacoff...
patches: / lowguidoschopshop
T shirts: lowguido.deco-g...

[@jinxsmoments9583]

I noticed that you have the same problem I have with the motor base plate not being drilled out to fit the motor base. I'll be sorting it tomorrow. Awesome vid as always and I cant wait for the next part.

[@lowguidoschopshop]

Yeah I can't remember If I mentioned that in the video or if I edited it out. But it needs to be bored out a bit to fit the motor

[@ghilleinthemist2994]

the MK box is designed around the thicker SHS oilless bushes according to their documentation, so low profile bushes shouldn’t be necessary and as you mentioned would just require using excess shims 👍🏼 Also you titled your vid part 3 instead of part 2 😉

[@ghilleinthemist2994]

I'm just stating what MK published in their own documentation mate

[@Ben-fb3nz]

Love the disclaimer 🤣🤣

[@afiqkamal2845]

The amount of shims i have to use with 8mm slim retro bushings are ridiculous ahahah

[@user-vb3dg3pb6s]

I know what you need Low Guido and I'll make one and send it to you 👍 - great video again

[@ComradeJehannum]

Who's been causing you trouble that you've had to put in the disclaimer screen?

[@jayly7453]

Nice video Guido , very informative.

[@darrenwilson7921]

Very interesting.

[@ryanfrance77]

So how did you get your motor to the right height without the grip screw and how much play in the pinions height?

[@ytpeep7393]

Yeah he never showed how to shim motor height 😂

[@troyw5832]

☺😊😀😁😂5 Smile's going into the save box😆I still want to see what happens when you mix gears any video???? Add lock tight if you have a issue with the motor plate moving have a ACR I want to do this one with the full metal gearbox note if you get the metal upgrade parts kit and want to anodize them you may want to check I had a few parts for the J10 ACR cleaned them up and checked it was not metal for anodizing with a magnet the problem is its actually magnesium metal which also don't react to a magnet 😡'O if you want to find out if it's aluminium or magnesium test with vinegar the magnesium will foam white with vinegar while aluminium will not react to the vinegar.

[@jackdaniel4370]

Stupid Question but is there a way to put a gearbox from a KUBLAI M4 into a SCAR V2 so it has select fire and an up with the time so to speak gearbox!...

[@lowguidoschopshop]

Not really.

[@ryansyoutube6635]

Part 2?

[@RA75AK]

That's after Part 7. Which is next. Followed by parts 5 then 4, a recap of part 3 then part 6.

[@gixxermeric9880]

Hey man ... did you use the standard pinion gear that came with the motor for those 16-1 gears ???? 🤔.

[@gabc6296]

Where did you find metal gearbox ' customs has seized 5 of mine so far

[@lowguidoschopshop]

The gearbox is an MK tactical. Made in Australia so there is no customs issues.

[@themcfunnel]

any v3 variants

[@mikemegadeth4110]

I hate the bottom grip plates myself. I started using the EMG Ergonomic Combat Motor "Delta" Grip from evike. Its takes a big Alan screw but some Teflon tape fixes the looseness. It uses a flip down door system which makes my life a lot easier. I always strip those plastic holes! www.evike.com/products/13768/

[@rolandhennig7757]

Link to f/b is either broken or doesn't work,how else can i get patches?

[@RSun75]

first!

[@rolandhennig7757]

Dammit!!! haha!