Pulling The Engine Out Of The Mk3 Golf Savoy! ( VR5 Swap )

  Рет қаралды 16,986

Christian Smith

Christian Smith

Күн бұрын

Пікірлер: 67
@miketaylor6282
@miketaylor6282 3 жыл бұрын
Nice thinking outside the box when it came to using the seatbelts in place of the chain.
@jamiepotgieter
@jamiepotgieter 4 жыл бұрын
Finally started my KZbin build 😂 Thanks for the inspiration 🙌🏻
@Mk3Smith
@Mk3Smith 4 жыл бұрын
jamie_potgieter nice man!🎉
@lylejamesevertse8725
@lylejamesevertse8725 4 жыл бұрын
Im a subscriber😁
@marcusesteves3120
@marcusesteves3120 4 жыл бұрын
Left here to go watch your first video. Good job man . Now I'm back to this video haha
@lessmasterdark
@lessmasterdark 4 жыл бұрын
Nice to see a good condition mk3. Ones up here in Norway are all rusting apart, and there's barely any left that hasn't holes in the canals, floor, strut towers, a-pillars etc.
@scottyst
@scottyst 4 жыл бұрын
Watching your vids inspired me to buy a vw i now own a golf mk6 and mk4
@marcusesteves3120
@marcusesteves3120 4 жыл бұрын
That's awesome!
@chrisbyers4726
@chrisbyers4726 4 жыл бұрын
That cannister is your A/C receiver/drier. Swap is looking fire.
@toddwilliams9681
@toddwilliams9681 4 жыл бұрын
me & my cousin(master vw mechanic)use to do vr6 swaps into mk2 gti's 20 years ago when it was rare, and we never had a engine hoist we used dolly carts, dropped the engine& tranny on the cart & push em out
@weyland1000
@weyland1000 4 жыл бұрын
I was expecting a weeks worth of vlogs for the engine removal and you managed it in a day . Very nicely done dude .Very nicely done . 👍 it’s going to be awesome watching you pull the VR5 out and fitting it in the Savoy with those sick engine mounts. That car will be so unique and cool when it’s done . Excellent as always Christian. ⭐️⭐️⭐️⭐️⭐️
@Mk3Smith
@Mk3Smith 4 жыл бұрын
weyland1000 pulling an engine out of a mk3 is surprisingly easy if you don’t run into any roadblocks which thankfully I didn’t lol appreciate the support man!🤘🏼
@weyland1000
@weyland1000 4 жыл бұрын
Christian Smith .No worries. Love your channel and content dude . .
@lawrencevw_mk1_velociti928
@lawrencevw_mk1_velociti928 4 жыл бұрын
Finally a KZbin channel that actually does what it promises
@Mk3Smith
@Mk3Smith 4 жыл бұрын
Lawrence Ramaijane I try my best haha sometimes things take longer then I’d like but I try and get everything done 🤘🏼
@lawrencevw_mk1_velociti928
@lawrencevw_mk1_velociti928 4 жыл бұрын
@@Mk3Smith fact of the matter is you keep us updated and you deliver. We are thankful for you Man🤘👏👏
@hc__1955
@hc__1955 4 жыл бұрын
Hey, can you trie to install the front of milley(headlight,grill),on the Savoy?
@henryjackson2555
@henryjackson2555 4 жыл бұрын
Great job fast and easy,I hope I can pull mine that smooth. I'm going to do your old swap 2.0 to VR-6 for my MK-3 GTI Golf. You make it so simple.Great Job.
@omarmoran3097
@omarmoran3097 4 жыл бұрын
Yeah most of this engine are so simple.
@maxnaidoo2152
@maxnaidoo2152 4 жыл бұрын
Finally, its happening... hope the install goes as easy as this!
@Mk3Smith
@Mk3Smith 4 жыл бұрын
Max Naidoo me too haha
@nickbarber5335
@nickbarber5335 4 жыл бұрын
Dope. You crushed that!
@billasohyeah
@billasohyeah 4 жыл бұрын
Cool. Loved the detail to remove the front easily and without damaging anything.! Keep up. Peace
@joekizonu9503
@joekizonu9503 4 жыл бұрын
Yeah!! That's bad ass! Looking forward to seeing these mounts and especially the harness that your getting. Is the mk3 power stearing going to work on the vr5?
@Mk3Smith
@Mk3Smith 4 жыл бұрын
Honestly I’m not exactly sure I know my power steering lines worked fine from the 2.0 to the Vr6 so I’ll have to see how the power steering pump on the v5 connects but I think it’ll work hopefully haha
@michaelmccaw9910
@michaelmccaw9910 4 жыл бұрын
@@Mk3Smith delete p/s. Way cleaner bay. A/c and abs also
@PieterKuijk
@PieterKuijk 4 жыл бұрын
Nice! Worth the waiting. I want to get my cabrio abf swapped so this is a pretty good how to. Thanks man!
@Mk3Smith
@Mk3Smith 4 жыл бұрын
Pieter Kuijk of course man!
@rowanphooko6088
@rowanphooko6088 4 жыл бұрын
I've been waiting for this for so long, it's the first video I'm watching tonight
@brysonadonis1854
@brysonadonis1854 4 жыл бұрын
V5 sounds so good😍
@vr6projects
@vr6projects 4 жыл бұрын
niceeee.... looking forward to the clean up but most of all i can't wait to see the engine conversion kit going in👍👌
@sergiovillarreal9421
@sergiovillarreal9421 4 жыл бұрын
Vr5 swap 🤩🤩 ufff
@jimibill6854
@jimibill6854 4 жыл бұрын
Good Work Bro!! Cant wait to see more progress !
@piasprojects
@piasprojects 4 жыл бұрын
That was a fairly smooth engine pull. I’m looking forward to this progression!!
@eurotuner01
@eurotuner01 4 жыл бұрын
Good luck on the vr5 quest
@ffwmotor-sport1081
@ffwmotor-sport1081 4 жыл бұрын
Soo excited for the V5 conversion 😁
@Mk3Smith
@Mk3Smith 4 жыл бұрын
FFW Motor-Sport SAME!
@TheVWGarage
@TheVWGarage 4 жыл бұрын
Is that v5 motor smoking????
@Danny_Fernandes
@Danny_Fernandes 4 жыл бұрын
Great success 👌
@BetaBear
@BetaBear 4 жыл бұрын
so ready for the build
@brandoneberlin1694
@brandoneberlin1694 4 жыл бұрын
That’s awesome man I’m glad it’s finally under way! Do you plan on cleaning up the engine bay like tuck it or anything? I know you said you’ll have to get a harness to make it work and I was wondering if you were going with a shaved bay or not. Either way I can’t wait to see the v5 in there instead of that headache of a motor lol good luck with it, can’t wait for the install videos.
@Mk3Smith
@Mk3Smith 4 жыл бұрын
Brandon Eberlin yeah currently I plan on the engine bay being pretty much the same as how I did the partial shave bay in my Jetta. Gonna relocate a few things, shave off brackets and tabs, and paint everything
@Albert87nl
@Albert87nl 4 жыл бұрын
notice its the old Abs.... soo good job on cutting the loom. nobody is going to mis that P.O.S haha. birhgt side when you puleld the entire loom and ecu.. you just removed 13,7 ish kg. ;P #CusRacecar hahaha
@3p1cr1d3r
@3p1cr1d3r 4 жыл бұрын
What about the wiring harness? Are you gonna tackle that yourself?
@kalebm.9355
@kalebm.9355 4 жыл бұрын
Get a 1.8T!! Would love to see you working on one and building it!
@ergz-vr6
@ergz-vr6 4 жыл бұрын
Keep up the. Wicked content bro 👊🏻👍🏻👍🏻
@samvhell9104
@samvhell9104 4 жыл бұрын
Finally ! Took some time eh 😅
@Mk3Smith
@Mk3Smith 4 жыл бұрын
• MisterCRX • actually went pretty fast until I spent like an hour trying to find my triple square 😂 but for just chillen and no rush it went well
@kadaaek9742
@kadaaek9742 4 жыл бұрын
We are waiting next 😊
@z8294
@z8294 4 жыл бұрын
v5 incoming!
@chumamashibini9319
@chumamashibini9319 4 жыл бұрын
Which shock mounts do you use for your mk3?
@Anthony_DiDonato
@Anthony_DiDonato 4 жыл бұрын
Did you teach yourself how to do swaps?
@Alexander.90
@Alexander.90 4 жыл бұрын
Now listen to "Steelheart - She's Gone" and think of the 1.8 while listening xD
@drdcontent4086
@drdcontent4086 4 жыл бұрын
Christian i saw a video on your channel of miley not getting reverse ?..I have the same car & also the same problem ..can you tell me what you did or what the problem was pls ?
@Mk3Smith
@Mk3Smith 4 жыл бұрын
DRD content that was due to my shift linkage not being aligned properly. Once I adjusted it correctly the problem went away 👍🏼
@drdcontent4086
@drdcontent4086 4 жыл бұрын
@@Mk3Smith thanx much appreciated ...you should do a video on how to align shift linkage or adjust shift linkage lol.
@DavidHernandez-oc7vr
@DavidHernandez-oc7vr 4 жыл бұрын
So whats up with the back seats in the v6
@Mk3Smith
@Mk3Smith 4 жыл бұрын
David Hernandez what? Lol
@r.a.wrcfootage5511
@r.a.wrcfootage5511 4 жыл бұрын
Savy 5
@Lifeof_Phil
@Lifeof_Phil 4 жыл бұрын
so sick!!!
@omarmoran3097
@omarmoran3097 4 жыл бұрын
So it's going to make Miley go a bit more faster? 😂
@sitoianualex
@sitoianualex 4 жыл бұрын
Finally
@hadrilozano
@hadrilozano 4 жыл бұрын
hello good afternoon Smith hey a great favor do you think you can put subtitles on your youtube videos preferably in Spanish
@albertonava8852
@albertonava8852 4 жыл бұрын
Yes spanish titles👌
@omarmoran3097
@omarmoran3097 4 жыл бұрын
Well to bad start learning English
@michaelmccaw9910
@michaelmccaw9910 4 жыл бұрын
Delete all the things
@Mk3Smith
@Mk3Smith 4 жыл бұрын
Michael McCaw big facts
Huge Progress In The Engine Bay! ( Mk3 Golf Savoy Project )
15:22
Christian Smith
Рет қаралды 7 М.
The Engine Bay Looks Amazing!! ( MK3 Golf Savoy Project )
16:52
Christian Smith
Рет қаралды 9 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
W8 Passat Engine Teardown and Inspection ~ TINY V8
25:46
HumbleMechanic
Рет қаралды 611 М.
Ремонт КАМАРО (2.0T LTG): Гидроудар
1:22:37
Мастерская K-POWER
Рет қаралды 336 М.
Fabless Manufacturing Parts For The MK3 Golf Savoy! ( VR5 Swap Kit! )
12:49
golf 3 GTI 150 chv / 🔥 ماشاء الله واعر❤️
13:28
Yanis dz cars
Рет қаралды 319 М.
Top 3 Engine Conversion Donor Car For A MK2 Golf?
14:47
Barn Club Cars
Рет қаралды 38 М.
Torque converter in a manual transmission - will it work?
15:05
Garage 54
Рет қаралды 755 М.
1.8 20V TURBO MK3 VW GOLF - LETS TALK A LITTLE.
12:11
Niyaaz Isaacs
Рет қаралды 25 М.
James from Donut 2.5t MK3 Build - Start to Finish!
17:43
Deutsche Auto Parts
Рет қаралды 798 М.
Completely Building A VR5 Swapped Golf 3 Savoy In 23 Minutes!!
23:28
Christian Smith
Рет қаралды 650 М.
Rebuilding a 25 year old 12v VR6 Engine for a Swap!
29:47
Third Gear Grind
Рет қаралды 95 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН