That 2nd horn is the factory alarm horn on mk3. Keep it and put it back.
@r32marcus4 жыл бұрын
100% keep the bay as it rolled out the factory man. Loving the progress
@miketaylor62823 жыл бұрын
What an incredible difference you made by cleaning that engine bay, It looked awesome!!!
@marcusesteves31204 жыл бұрын
Dude that horn being disconnected could have been the reason you were having issues with that engine. Oh well into better issues hahaa
@SuperClownLoach4 жыл бұрын
Love how all that nice oily gunk protected that paint
@weyland10004 жыл бұрын
I would leave it factory. The paint is almost mint under all that dirt .Its coming along nicely dude 😃
@lowernation24664 жыл бұрын
Point one its a horn , and that glue in the engine bay is Wax they use so the engine bay not can rust
@Danny_Fernandes4 жыл бұрын
Leave it factory look! Damn that engine bay is looking real good!
@vr6projects4 жыл бұрын
Christian smith, No way leave the bay as it is. Originality is always a nice thing to keep. That bay is coming up so clean and the paint is in such good condition i dont think it needs to be done, not to mention the amount of time and hard work for such a small difference just in my books is not worth it. If the paint was missing or no good od say do it. Not afraid of a bit of hard work my friend 😝👌 and look at the outcome that fabricated engine mount kit is going to look so good against that factory paint.👀✌️
@FatherxSnipes4 жыл бұрын
That is a horn in your fender, its used for the alarm and the one towards the front is used on the steering wheel like normal :)
@Osscars4 жыл бұрын
keep it as is it will look cooler in the end aaaand you can also say that it is original paint ;p
@miketaylor62823 жыл бұрын
GREAT TIP!!! I didn’t know that tab was there. Thank you!! 01:20 If that sticker was fully in place, it would be hard to discover that tab without your tip
@BarronLathers4 жыл бұрын
I believe that’s your alarm
@trafix864 жыл бұрын
The ABS harrness goes under the panel on the right side of the passenger seat and further to the Abs ecu under the backseats.
@Mk3Smith4 жыл бұрын
Sascha Langlotz I learned that and I’ll have to go back and pull the rest out lol
@youngaux318 Жыл бұрын
Love your work all the way from south africa 🇿🇦
@ergz-vr64 жыл бұрын
100%. Keep it as it.
@jellevanonna13894 жыл бұрын
Factory paint and sealer for sure! This thing will look amazing with paint matched reservoirs😍
@SiyandaNgobese194 жыл бұрын
the build is coming together pretty nicely
@ffwmotor-sport10814 жыл бұрын
The factory paint looks sweeeet! I'd say leave it as is👌🏽, loving the progress though!
@Henrik-Pedersen4 жыл бұрын
Factory paint and sealer keeps the rust away 👍🏻
@maxnaidoo21524 жыл бұрын
That engine bay looks like it just got painted. Time machine to '94.
@Mk3Smith4 жыл бұрын
Max Naidoo wait till you see tomorrow’s video lol
@123Johnny4 жыл бұрын
I think that waxy stuff is called cosmoline. My mk1 has it. I haven't tried but read that wd40 should ease removal.
@hadrilozano4 жыл бұрын
here pending your projected greetings from Guadalajara Mexico
@r.a.wrcfootage55114 жыл бұрын
Waiting on the new name for the SAVY5🤘🏿🤘🏿
@eugene-leeplaatjies37864 жыл бұрын
Nice dude all of the best and keep up the clips liking everything you do the horn under need the fender is maby for the car security
@lugabug66204 жыл бұрын
When i pull my 1.8t out of my mk4 i soaked it in purple power then pressure washed it and it was insane highly reccomend that
@gingrjeffy4 жыл бұрын
One of the coolest things about the Savoy is you'll be able to bring it home to the states. Is that the plan?
@michaelmccaw99104 жыл бұрын
Make seam sealer great again!
@TrapJacket4 жыл бұрын
Leave it as is 👌🏽
@ryanwindvogel36554 жыл бұрын
Shave it! I love the Savoy has so much potential and personality😍
@Whatshouldicallit6604 жыл бұрын
Leave the OG paint in the engine bay! Looks so good!
@bennyb51854 жыл бұрын
that is wax in the engine compartment and goes away very easily with a hot air dryer
@3p1cr1d3r4 жыл бұрын
Definitely leave it as is!!
@rochertop4 жыл бұрын
I had the same stuff on my frame rails on my vr6 when i wanted to clean the bay. Some sort of wax is it from the factory (but i stopped with removing the wax bc it was a pain)
@4m_max4 жыл бұрын
Hey! Just use a heatgun and a rag to remove this gunk next time.
@jwa67894 жыл бұрын
LET'S GO BOI lets get it bro looking great already
@LAEdgar4 жыл бұрын
Really really cool to see your process I have 2 mk3’s 1 my 2.0 daily and I’m doing the exact same thing rn to my other mk3 as well, swapping the 2.0 to a vr6. Trying to record my vr6 swap on my channel bro, love from East Los Angeles Cali!
@Mk3Smith4 жыл бұрын
Ed P you’re gonna love the Vr6 good luck man!
@joekizonu95034 жыл бұрын
Looks really good.
@MrErock02844 жыл бұрын
Diesel fuel works wonders to get all that grease, wax sealer and grime off. Keep it up!
@jaymistry93114 жыл бұрын
You should leave the textured stuff on there for protection.
@Alvaroz9514 жыл бұрын
This factory wax is a pain to remove haha, early mk3 are full of it, i have spent hours cleaning mine... You are going to route the harness behind the fender? I think is the best way to go, I think on Miley would be a great touch to the bay!
@Mk3Smith4 жыл бұрын
Alvaroz951 haven’t decided if I want to do an extended harness yet or not we will see lol yeah the wax takes sometime to remove but I’m super thankful it saved my paint haha
@Professional_734 жыл бұрын
Keep it factory.Clean it and maybe ceramic coat it
@kylestumpo73724 жыл бұрын
Awesome video! I think you should leave the bay as is, if you mess with it too much you might not be able to get the paint to match up right. I think it's going to look so awesome when it's all done. You were talking about a one piece carbon fiber rain tray last video, do you have a link where we could find that at. I would love it for my MKIII.
@Mk3Smith4 жыл бұрын
Kyle Stumpo wait till you see tomorrow’s videos haha and check out @spoonfedtuning for the tray 👍🏼
@kylestumpo73724 жыл бұрын
@@Mk3Smith thanks! Can't wait for the new video tomorrow!
@samvhell91044 жыл бұрын
You should call it the 5AVOY
@martinbartenbach85164 жыл бұрын
Now you know why the car wont start. The car had an alarm system which shut down the fuel pump.
@jespertolhuis75904 жыл бұрын
It is a wax that they put on at the factory, a common trick is to use a heatgun and a rag. will save a lot of time Like so christian will see this
@markgoudsblom4 жыл бұрын
Leave the paint stock
@autotuning654 жыл бұрын
Better to remove With boiled water
@harrisonsearle76454 жыл бұрын
Remove the sealant to go for a smooth finish similar to miley's 😁
@bigvolks14 жыл бұрын
Hey men, shave the engine bay 🤟
@ricardonavarrete68964 жыл бұрын
Does anyone know where on a mk3 the secondary air pump relay is?? Please i need some help
@Ryan-nr5gr4 жыл бұрын
Im watching on my 2nd account lol, I have a mk4 jetta btw
@collinlaque9644 жыл бұрын
I feel like, if this is going to be the more track focused car, you'd want to keep the abs, but i guess a good driver doesn't need it
@Whatshouldicallit6604 жыл бұрын
Yeah I feel the same but I really like that. Would be a good opposite to Miley (bags, stance wheel specs). Having abs or not has nothing to do with a good driver in my opinion because it’s safety equipment and you shouldn’t underestimate how abs can safe your a**.
@collinlaque9644 жыл бұрын
@@Whatshouldicallit660 yeah, i was saying skill wise, sometimes you can feel before the lockup and stuff, but the mk3 break pedal sucks so I bet it would be hard in that car
@Mk3Smith4 жыл бұрын
Collin Laque not sure exactly what this car will be for. More then likely it’ll be like Miley and go to shows and also rip the back roads 🤘🏼 as for the abs I’ve heard a lot of horror stories with this particular system where it can actually be dangerous and a lot of people delete it all together. This car also has a portioning valve in the rear so braking force should be good at all corners and no risk of abs malfunction. Plus non abs looks much cleaner lol
@collinlaque9644 жыл бұрын
@@Mk3Smith makes sense, it looks great so far! I wish you luck!
@flamurberisha11994 жыл бұрын
I think it has been cavity waxed that is wax that what saved the paint
@mariomanzo41164 жыл бұрын
Dump some goo gone on those frame rails and you'll have a much easier time removing that stuff
@guidoheeling11794 жыл бұрын
just leave the paint as it is
@johnmerica56244 жыл бұрын
HEY CHRISTIAN I HAVE A PROBLEM IN MY 97 TBI 1.8 GOLF IN THE COLD START IT DOSNT WANT TO IDLE RIGHT AND IT WILL STALL BUT ONCE IT GETS TO TEMP ITS FINE ITS ALSO TAKING IN TO MUCH GAS ANY IDEAS PLZ HELP
@kylestumpo73724 жыл бұрын
Check your vacuum hoses, one could be ripped or torn, I had the same issue with my 98 vr6
@autotuning654 жыл бұрын
Alarm 🚨
@jomamasfavor84 жыл бұрын
Save the 94 paint pls
@MarkBeezBlogs4 жыл бұрын
Leave the bay as is.
@LuigiNathan4 жыл бұрын
Im 3rd 😊👑
@valentinneagu99334 жыл бұрын
It's a horn,mk3 have 2,and mk4 have 3😂...euro spec cars.
@guidoheeling11794 жыл бұрын
mk 4's have like the most shitty horns ever, i've had 3 mk4's and the horns are all shitty sounding, air horn is installed and sounds beautifully
@guidoheeling11794 жыл бұрын
and not all mk 4's have 3 horns i think, at or the previous owners of two of mine both removed one XD