Great video, very informative and no waffling on for 20 minutes like some other people! Thanks
@henry__johnson6 жыл бұрын
All I can think about now is big polished tips.
@LeeBennett0076 жыл бұрын
Nice job again fella. Really enjoy your content.
@JBCTR6 жыл бұрын
Lee Bennett Cheers Lee 👍🏼
@rc70ys7 ай бұрын
How did you colour of the aluminium parts of your OEM wheels to a bronze looking colour ?
@scottfraser.wildlife6 жыл бұрын
That is sick, i recently got a miltek cat back system on my mk7.5 1.0 ecoboost and i love the 3 cylinder sound 👌
@XVII00l-K3 жыл бұрын
where did you get that?
@MisterS4League4 жыл бұрын
Just ordered one
@bernardlatuner51346 жыл бұрын
The new Fiesta Exhaust sounds pretty good. Why changing it to have quite the same as the original ?... Thank's.
@JBCTR6 жыл бұрын
bernard latuner I wanted more and the Milltek delivered. The ST sounds great from factory, but even better with a Milltek 😎
@bernardlatuner51346 жыл бұрын
OK, it's your taste ! :-)
@dragonrevel69536 жыл бұрын
I dont understand you lol 1. Changing the exhaust on a brand new car. For zero performance gain. 2. Sounds like the original just louder ? if you can buy a new ST + waste money on a exhaust why not buy a a more expensive car like Golf R or i30N, Cupra? A step up from Fiesta ?
@splift236 жыл бұрын
less priced car = more money for mods
@ilpatongi5 жыл бұрын
@@dragonrevel6953So, tell me how spending 800 euros on a different exhaust on a 25.000 euros car is the same as spending 40.000 euros on a complete, different car. I really don't understand the math here
@TheGazza6363 жыл бұрын
Great quality presenting
@dimitrispapadimitrioy1775 Жыл бұрын
I also put it in and it's missing..maybe the connections need a plug?
@ashb1502 Жыл бұрын
can you recall if you used the old rubber exhaust hanger mounts or used uprated ones?
@JBCTR Жыл бұрын
Just the normal ones are okay!
@obsesseddetailer54165 жыл бұрын
when do you have your trunk lid properly aligned? the gap on the left is huge.
@santo300111 ай бұрын
this video is quite ''old'' but still hope for a response. is this exhaaust resonated or not? and if there is a big diffrence between that
@juanito61476 жыл бұрын
Great video 👍🏼
@Simdyal12346 жыл бұрын
6:53 my neighbours are gonna hate me loool
@butcherkk4 жыл бұрын
Do you had any check engine ?? Beacause I've milltek too and some times will light up. And its only mod in my car.
@JBCTR4 жыл бұрын
Nope, no check engine light. Check the connectivity to the valve module if you are getting CEL.
@butcherkk4 жыл бұрын
@@JBCTR I check wires from the valve control motor. And was OK. Ford Servis think that is motor from the valve. But motor is fine always closes and opens. I dont know whats going on.
@Mk2Mitch6 жыл бұрын
Wicked mate I work just round the corner from there! Are they gel plates, and if so where did you get them?
@JBCTR6 жыл бұрын
Mk2 Mitch Yup - Demon Plates. Pricey but good quality :)
@Mk2Mitch6 жыл бұрын
Wicked thanks, just checked it out and think I’m going to treat myself to a set, do they come with the British standard mark on the bottom right corner though?
@JBCTR6 жыл бұрын
Mk2 Mitch yes mate, it’s there :)
@Mk2Mitch6 жыл бұрын
Brilliant thanks for the info, been looking at quite a few sites but they don’t print the British standard on the plate, meaning it’s not legal/legit so thanks for clearing that up!
@brandonbhavdass81655 жыл бұрын
Does this exhaust mod void warranty on the mk8?
@JBCTR4 жыл бұрын
Difficult question to answer. Officially yes, but you are voiding the warranty on the exhaust. However as the exhaust is replaced, you then get a Milltek warranty in its place.
@stevenjacobs270 Жыл бұрын
i want this too on mine
@euskadi6443 жыл бұрын
Super vidéo ! 👍
@JBCTR2 жыл бұрын
Thanks!
@chriselse5156 жыл бұрын
Great video again mate them drone shots were very well done. I'm not happy with you though my bank balance is taking a bit of a hit at the moment, first light bulbs and this will be my next purchase.
@marti93 жыл бұрын
Have any issues with the valve closed? Like cruise control on and exhaust sounds like its flutterin stuttering only when valves closed at gentle steady throttle
@sammartindale9052 жыл бұрын
Great video, quick question would this exhaust fit a 2017 st 200?
@JBCTR2 жыл бұрын
Hi, no this wouldn't fit the MK7.
@saucyyt45033 жыл бұрын
Is it possible to change the exhaust when on PCP?
@JBCTR3 жыл бұрын
It's a bit of a grey area. Many people do but it's technically against the terms of most contracts. Check yours to be sure!
@Torque_Motor6 жыл бұрын
Sounds very nice, Unfortunately we won't be having the Fiesta St in South Africa
@JBCTR6 жыл бұрын
katlego makhubedu Amazed to hear so many counties that used to get the MK7 are not getting the MK8 as I was under the impression this car was for a more global market!
@robray71066 жыл бұрын
Us either in the US.😥😕😟🤬
@Miguel-mv5yc5 жыл бұрын
Was there any weight reduction in the process? Are you planning on removing the GPF?
@JBCTR5 жыл бұрын
Don't think there was much of a weight reduction, and no I'm hoping to leave it in place if I can! I'm intrigued as to whether or not exhaust manufacturers can develop a 'sports GPF' or similar :)
@tomr67243 жыл бұрын
Hi! Is it normal that in sport/track mode the valve closes while accelerating? And opens again when I release the gas pedal.
@JBCTR2 жыл бұрын
Not sure exactly when it opens and closes, but yes its normal.
@Philzifyy6 жыл бұрын
Did you cash this thing out or you on a finance plan? If on a finance plan how do these upgrades effect things like the GMFV or warranty
@JBCTR5 жыл бұрын
Philz 11 months late to respond. My bad. The car is mine, so fortunately I don’t need to worry about GMFV. Warranty is impacted, but you are replacing the item impacted with Milltek, which has its own warranty 👍🏼
@danbriault665 жыл бұрын
Is your car on finance? If so how does your mods effect the finance? Do you have to put it all to standard if you hand it back or part ex?
@JBCTR5 жыл бұрын
Dan Briault Hi mate, the car isn’t on finance 👍🏼
@tomr67243 жыл бұрын
Any performance boost with the milltek? 💪
@JBCTR2 жыл бұрын
Possibly with it being free-er flowing. But probably nothing noticeable. This car made very strong figures on the dyno (there are videos of it on the channel :))
@stephenheyes14876 жыл бұрын
Hi Fella, yeah I can see what you mean about the exhaust, when went to get your back section fitted did they give you any idea when the full exhaust system will be available?
@JBCTR6 жыл бұрын
Stephen Heyes Hi there! I didn’t ask and they gave no indication. I’m not sure if the GPF will make life difficult for them or not. Presumably it can’t just be removed for MOT reasons. Either way, you’ll need a map for a full exhaust as development for ‘stage 1’ hasn’t really been completed yet. Gonna be a good few months before we see a ‘stage 2’ tune, exhaust and intercooler released I think!
@stephenheyes14876 жыл бұрын
@@JBCTR Cheers fella did they give you any HP power numbers? I was thinking 230hp should be possible, I know the 1.0 can be tuned to 177hp
@JBCTR6 жыл бұрын
Stephen Heyes Nope nothing. It’s all under wraps for the moment I think! Although I reckon 230 is probably a push for just a map. We shall see 😬
@stephenheyes14876 жыл бұрын
@@JBCTR Cheers fella hopefully Mountune will have something in the New Year😎
@craigstevenson43066 жыл бұрын
There's a clutch recall already.
@GrecoFPV6 жыл бұрын
Is this moon dust silver color ?
@JBCTR6 жыл бұрын
Millennium FPV This is magnetic grey :)
@robyL925 жыл бұрын
hello, I have the exact same exhaust, but since I mounted the car when it stopped crackling in sport / race mode, did you happen to have to remap?
@JBCTR5 жыл бұрын
That's strange, you don't need a remap. Check the connection to the module on the valve - seems to be a common culprit for faults after changing the exhaust.
@tomr67243 жыл бұрын
Sei riuscito a sistemare?
@robyL923 жыл бұрын
@@tomr6724 ciao, si, era una questione di temperatura esterna faceva troppo freddo e quindi non riusciva a scaldarsi sufficientemente lo scarico! 👍
@H8XME5 жыл бұрын
Aren’t the standard exhausts made by magnaflow?
@JBCTR5 жыл бұрын
Daniel Ford H I don’t believe so... there’s no branding on it other than FoMoCo.
@willparkinson6 жыл бұрын
Starting to get quite jealous of you now haha mine has just been delayed again until late October :(
@JBCTR6 жыл бұрын
Will Parkinson it’ll come. Hopefully it doesn’t end up being an Xmas present!
@raptor15136 жыл бұрын
Same I'm waiting since 22.04.2018
@thegreatalta6 жыл бұрын
@@raptor1513 Are you in the UK? Ask dealer to check again pal, ordered mine June, built last week, delivered next week.
@raptor15136 жыл бұрын
@@thegreatalta Germany, they change a order from April 22 into my car I went to him at July 27... he said this or next week he will have the info cause ford having problems...
@thegreatalta6 жыл бұрын
@@raptor1513 The cars are built in Cologne. You are much closer than me lol. Mine is custom not stock and was such a long wait because of this. Think they are pulling your leg. I know that the compound turn around is 7 days or so due to production of the focus so yours should have been finished also if not some time ago... that's poor my friend. Feel for you!
@jonaydibe70436 жыл бұрын
Hi I'm interested in buying the muffler you took from your party, you still have it?
@JBCTR6 жыл бұрын
Jonay Dibe Hi there, yes I do! Send me an email and I’ll get back to you. It’s in my ‘about me’ section. Cheers
@smithy32696 жыл бұрын
That sounds terrible, I’d put it back lol
@Giorgos.Tsiaras16 жыл бұрын
Awesome sound cheers!!! But what about the car's warranty?
@JBCTR6 жыл бұрын
Giorgos Tsiaras I’ll paste my answer from another comment :) It isn’t warranty friendly. However you do get a Milltek warranty on the exhaust and a GPF back is very unlikely to be the cause of any issues upstream and therefore manufacturer warranty should remain in tact for the rest of the vehicle, unless they can prove the exhaust caused a fault. Slight risk, but it’s minimal IMO.
@Giorgos.Tsiaras16 жыл бұрын
@@JBCTR thank you for your feedback really apreciate it!
@stevenhearnden61036 жыл бұрын
Does this void the warranty?
@JBCTR6 жыл бұрын
Steven Hearnden It isn’t warranty friendly. However you do get a Milltek warranty on the exhaust and a GPF back is very unlikely to be the cause of any issues upstream and therefore manufacturer warranty should remain in tact for the rest of the vehicle, unless they can prove the exhaust caused a fault. Slight risk, but it’s minimal IMO.
@adrianconesa27045 жыл бұрын
Can it be fitted in a stock vignale mk8?
@JBCTR5 жыл бұрын
Adrian conesa This wont fit a vignale as it has the 1.0 engine. I believe there is a Milltek available for the 1.0, but you may need to change the diffuser.
@lmfao83146 жыл бұрын
Go on jonny
@anthonybrotherton32122 жыл бұрын
Hey, had my exhaust fitted by a milltek dealer garage. Love the exhaust and its tone. Just wondered if you experienced any sort of rumbling type vibration from the rear of the car after fitted? I get this when I'm at cruising in comfort mode at speeds at around 60 / 70mph and around 2200revs. Not present in sorts mode. So leads me to think it comes on when the cylinder deactivation kicks in. Probs Need to get something like powerflex hangers. It's not a huge issue. Just curious 😅
@JBCTR2 жыл бұрын
That's the cylinder deactivation. It's more noticeable with the exhaust.
@piersmorgansdog90346 жыл бұрын
say hello to the brand new fart box
@cyclemartin40736 жыл бұрын
Why Miltek ? I had a miltek before on a mk5 2.0 ST I didn’t like it or the fitment.
@crmercer64076 жыл бұрын
mk8 fiesta is now the same size as the mk1 focus.
@JBCTR6 жыл бұрын
cmercer Mad to think this used to be the size of a family car! People still comment how small it is 😂
@Luke.Derrick386 жыл бұрын
Can someone help me out? Why is it that a system like that pops and bangs with no harm to the cat yet a pop and bang map so say destroys the cat as I've read on forums?
@xCoDxPr0x6 жыл бұрын
That isn’t pops and bangs, it’s more like a crackle over run like jbs do
@CouchMan886 жыл бұрын
On my 16 fiesta st i have the cobb stage 2. Still have the cat but straight piped the muffler and resonator. Sounds as good or better than any exhaust system, cost less than $100 and it pops and bangs pretty good on downshift especially or when hard on the throttle.
@ianian2005 жыл бұрын
hey man saw you car up ford fair looked sick! jus wondering how much it costed to get exhaust fitted at scc? cheers ian.
@JBCTR5 жыл бұрын
Hey mate! Thanks 😬 best to get in contact with SCC as their labour rates may have changed since this video was filmed 😁
@ianian2005 жыл бұрын
@@JBCTR coool cheers for the swift reply!
@lmfao83146 жыл бұрын
Sounds like a Diesel
@WRP_20036 жыл бұрын
LMFAO how are u thick
@lmfao83146 жыл бұрын
will park that doesn’t make sense baby boy
@WRP_20036 жыл бұрын
LMFAO yes it does i said How? are u thick ? witch you clearly are if you think a turbocharged 3cylinder petrol sounds anything like like a diesel
@TinglingTaco6 жыл бұрын
I closed my eyes while listening and immediately heard the Opel Astra 1.7D my dad used to have 15 years ago
@lmfao83146 жыл бұрын
will park it does will the exhaust change
@thomasgammelby93096 жыл бұрын
Nice vid. Look forward to the A\B comparison. Went for the polo but always good to see what’s going on with the competition. Since Milltek have one for the ST I figure they are also working on one for the GTI. Awaiting bolt on mods for the new 2018 hot hatches.... BMS are almost ready with a JB4 for The Polo GTI (All...EA888 Gen 3B cars) Getting 231 WHp out of it. Somewhere close to 265 hp at crank guesstimating a 15% loss to the wheels.. Will be interesting to see what mountune can get out of the 1.5 3cyl. :)
@JBCTR6 жыл бұрын
Thomas Gammelby The sounds check videos are up already :D the Milltek sounds awesome. Good news on the GTI - that’s quite an improvement!
@thomasgammelby93096 жыл бұрын
Went on your channel afterwards, didn’t notice the upload date 🙃 Yeah can't complain about the potential of the engine, It will need it to compete with the fiesta on track, it Lost by over 2 sec on nurburgring gp sprint circuit. More track focused tires and the LSD gave the fiesta an edge.. Think a wavetrac diff would help the polo a lot too.. The Fiesta seems the more complete track car out of the box.
@thegreatalta6 жыл бұрын
Lot of money and a waste of an exhaust... I'll wait till mine breaks. Does sound good tho
@ScottPC6 жыл бұрын
Miltek are getting worse and worse.. custom all the way!
@jasonpoole62846 жыл бұрын
Oh look another fiesta
@GrahamReid346 жыл бұрын
Miltek is so overpriced and the quality is awful, not sure how it aids flow right enough. I'm stumped at that
@cyclemartin40736 жыл бұрын
Graham Reid Yeah miltek are Sh💩T ! I don’t believe an Aftermarket Exhaust actually does anything for performance I think it’s a placebo effect from the noise , if anything you could loose a little bit of performance , Or it Moves the powerband around so yes it Might give a few extra bhp if your Lucky but it’s all at the Top end and you lose a Bit Low/Mid Rpm Grunt. Just to gain a Few bhp . I don’t think on its own it’s worth bothering with.
@3TimesFaster5 жыл бұрын
JP Performance actually tested a Fiesta ST with the Miltek exhaust on a dyno. With the Miltek you actually lose some hp and nm lol.
@TheRealMahalo276 жыл бұрын
For a 'performance' exhaust, this looks kinda boring i would say.
@JBCTR6 жыл бұрын
TheRealMahalo27 What would you like to see in a performance exhaust? I love the 90mm tips - think they look great in the bumper 👍🏼
@JustBlinkMe16 жыл бұрын
Milltek are at the top of their game. They make really decent performance exhausts. Not over the top, too loud and massive boy racer exhaust. This exhaust is perfect 👌
@fastfez25206 жыл бұрын
No downpipe install. Awesome so youve spent all that money for no extra performance just some noise. Downpipe being oem, is still restrictive so it doesnt matter how free flowing the rest of the system is.
@nimal11536 жыл бұрын
Wow. Can't even install a exhaust system your self. Lol
@ilpatongi5 жыл бұрын
And?
@dragonrevel69536 жыл бұрын
I just dont understand why you would change the exhaust on a brand new car? It just silly..
@dragonrevel69536 жыл бұрын
excatly i have ordered this car ST2 and i would never change the exhaust i think it sounds good as it is stock.
@avrilcadabra6 жыл бұрын
Lets disregard the sound. The fiesta is built on a budget the standard exhaust is made from pretty average steel. If you are intending to sell the car before it runs out of warranty then sure keeping the lower quality one does not matter. Ford themselves will get rid of these exhausts on the higher up performance models coming. Milltek makes exhausts for Mountune. if you want to upgrade the car then it's a must.
@thegreatalta6 жыл бұрын
What higher up performance models? They wont make an RS or a special. The car is not selling as the old one did unfortunately
@thegreatalta6 жыл бұрын
@Adam Gordon This won't change either. Look at Aston DB or R8 price when they came out compared to now, they have doubled in price, so in reflection it's not that bad, but you're right most of ain't got that cash level...