Cable Termination In Panel | Terminate Medium Voltage Cable | Underground Cable Termination

♥ＬＩＫＥ | ♥ＣＯＭＭＥＮＴ | ♥ＳＨＡＲＥ | ♥ＳＵＢＳＣＲＩＢＥ
Hello! Friends I am Muhammad Asif Ek Aur new video♥ Cable Termination In Panel | Terminate Medium Voltage Cable | Underground Cable Termination | MM Asif | ke sath Huzoor Hoon.
In this video, we show you how to terminate a power cable in a transformer And show you how to properly terminate an 13.8KV power cable in a transformer.
This video demonstrates how to terminate medium voltage cables in a panel.
This video demonstrates how to terminate a 500mm power cable using a transformer.
This Video will show you various steps that are involved in Medium Voltage (MV) Cable termination. Hope this is helpful.
This video demonstrates how to terminate medium voltage cable using an underground cable termination method.
Meri video acchi Lage toh please like Kijiye comments kijiye aur mere is channel ko jis ke NAME ♥MM ASIF hy is ko subscribe kijiye Shukriya. aapka Pyara dost Mehar ♥Muhammad Asif.
♥Plz subscribe kijiye
www.youtube.co....
♥ ♥ ♥ ♥_____/LINKS\_____♥ ♥ ♥ ♥
► Facebook Page:➜ / mm-asif-564997130539877
► Instagram:➜ / asifshazada. .
► Google+:➜plus.google.co....
► linkedin:➜linkedin.com/in/mm-asif-918258173
====__|Watch More Videos|__====
♥How To Electrical Pole Size In Urdu/Hindi | Types Of Electrical Pole Stay | Bijli Ka Khamba |
► • How Many Types Of Elec...
♥How To Use High Voltage Tester | Electric Detector Work | High Voltage Detector | Urdu/Hindi
► • High Voltage Detector ...
♥How To CT Energy Meter Connection | 3 Phase CT Meter | CT Installation In Urdu/Hindi |
► • How To CT Energy Meter...
♥How To Cable Size | Cable Size Chart | Cable Size Chart With Load | Cable Size Chart In Urdu/hindi
► • How To Cable Size | Ca...
♥How To Use Hilti Gun | Hilti Nail Gun | Hilti Powdered Actuated Tools | INTRODUCING | Urdu/Hindi
► • How To Use Hilti Gun |...
♥Fire In Electrical Store In Riyadh Saudi Arabi | Al janahain | الجناحین الریاض سعودی عرب
► • Electrical Fire In Wal...
♥Electrical Work Maintenance In Saudi Arabia Urdu/hindi
► • Electrical Maintenance...
♥Fuse Lagaane Ka Tarika 33kv/11kv Urdu/Hindi
► • Electrical Fuse Types ...
♥Track: Weero - Mates [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Weero - Mates | House ...
Free Download / Stream: ncs.io/MatesYO
#Cable_Termination
#Underground_Cable_Termination
cable termination in panel, terminate medium voltage cable, underground cable termination,
11kv xlpe armoured cable heat shrink termination
11 KV power cable termination
11 KV underground cable termination
Cable termination kaise kare

[@fikunademii]

I just got back from a subsea cable termination for chevron in angola, power and fiber, the experience was awesome

[@MW-dd4nd]

Just out of curiosity, what is your background and how did you get into this? I'm an electrician and high voltage SAP in the UK and would love to see this side of the industry

[@LI-BA-BA]

Желаю тебе автор этого видео всю оставшуюся жизнь слышать бесконечно музыку из этого произведения!

[@Atta-Ur-Rehman-st1jx]

😂😂

[@pdzh]

🤣

[@rickymundy8663]

Guys did a good job. I have worked with different companies providing UD training. Some companies don’t provide enough training and the proper tools to properly make these terminations. My experience has taught me that some of the less experienced think that if it holds upon energizing everything is ok. They do not know or realize that improper termination of medium voltage cables with the proper tools will eventually fail prematurely. I came up with I company that provided the training that taught us why we take all the proper steps in UD terminations and the proper tools. While providing training most of those that didn’t follow each step required by manufacturers just didn’t know. Most these guys want to do it right

[@mmasif7364]

👍

[@losttownstreet3409]

How many errors did you find here? No proper tools and some cuts are way too deep. The edges are not as clean as they should be and some effects at the edges might appear. Kudos for working with these tools and maintaining the grid with this.

[@Luzgar]

If you are going to only use music for sound, and if you are going to loop it, please choose a song that is longer than 15s.

[@UltraGamma25]

Yes, it's fucking annoying

[@maifeng]

Personally I prefer a good 10s loop to a shitty 5 minutes song

[@galaxiedance3135]

I wanna make that song my ringtone. I had no problem with it. I was actually more interested in what they were doing than listening to the song.

[@nostalgia46]

Sounds like adult film music from the 80s.

[@ScottDLR]

Yeah, that's hideous.

[@aftbit]

9:00 seems like the most dangerous part, both for the cable conductors and the bloke's thumb.

[@miguellopes4153]

Parabéns, é satisfatório ver um trabalho desses ser concluído sem falhas. Pernambuco - Brasil.

[@miguelramirez2858]

Sim chará 😂

[@sebastienghangha3024]

Thanks from France, really good work !

[@mikeiver]

Much prefer load break connectors. Fast off and on loaded or not, simple grounding of the cables and the primary for safe service work. Far superior. But good job on this one none the less.

[@Gameplayer55055]

worst fear: accidentally cut the cable shorter so it doesn't reach the contacts

[@j5892000]

Get so m.h e thick ass solder and a torch lol.

[@jannejohansson3383]

There's even parts for that, if someone mess up, or changes needed. Otherwise it needs I-joint and some cable, angry boss and try again! $$$

[@swsuwave]

Other worst fear: getting the phase rotation wrong when its done.

[@HighestRank]

kzbin.info/www/bejne/nGHOY5SLnt-datU

[@everydaycompress4259]

use extended elbows EZ FIX ...we have even cut off OLD elbows short and still re use the old cable just have new elbows and lightning arresters ..this is just a 3 phase going IN im sure they got 3 more on the other side.

[@vourill]

excellent workmanship...appreciate your adhering to standard termination procedures

[@mingyitan6388]

The craftsmanship is very skilled. For future inspection and maintenance, I feel that if the three-color tape is wrapped on the wiring cable to separate the phases, and whether the phase sequence is marked on the cabinet body will be clearer to the staff.

[@deang5622]

No. Phase sequence is not determined by the body of the transformer. Phase sequence is determined by the actual phase of the voltage on the cables. You can actually change the order of the cables connected to the transformer and as long as the output cables are also correspondingly changed, everything is good. So the correct way to indicate the phase of the electricity is to mark the cables first and foremost. You cannot not do that. It must be done.

[@rajthanya]

This is a ticking time bomb. Get a qualified Jointor . Jus pay attention to how he removed the seni con layer,This is a NO NO.

[@СтепанПетренко-т6й]

@@rajthanya с помощью ножниц для резки пластиковых труб... SUPER-EGO не делает инструмент для снятия изоляции с кабелей. Наружные проволоки надрезаны по кругу...

[@jenswesterburg18]

Manchmal nervig, aber manchmal auch schön das es hier Standards gibt.... Oh mein Gott ....

[@AhmadKhan-ce7wx]

ماشاءاللہ میں بھی ریاض میں شرکہ کھربا میں اس کام کی ہیلپری کرتا رھا بہت اچھا کام ھے

[@fibconetfttxsupplier2424]

Thanks for sharing! The fiber cable splicing work you demonstrated is highly informative and valuable for reference.

[@noelbyrne8735]

Absolutely nothing is right about this installation. 1: wrong type cable for the job, single cores in a trefoil should have been used instead of a multi core cable 2: wrong type termination kit used, a break out or multi to single core kit should have been used which keeps the screen on all the way to the dead break elbow. 3: no grommet or gland used to seal the in enclosure from ingress or moisture 4: the clamp is installed at the crutch which will cause stress and early kit failure Solution: have your technicians trained and educated properly. Government should introduce a standard based apprenticeship system. Follow jointing kit instructions to the letter.

[@rajatariq6808]

Mr Asf I appreciate ur work dedication / tc urself during working

[@claroypunto3774]

Saludos DESDE BOLIVIA... soy Tecnico Electricista.. muy buen video 👌

[@РахимовМахмуд-т8ы]

"Глаза боятся руки делают" " Опыть приходит годами" "Семь раз отмер, один раз отреж " Музыка несовсем,кто монтировал ролик имей ввиду ! Работа окуратная, хорошая.👍

[@unclefatbloke687]

Guys, NO! You do NOT use a naked flame on the shrink sleeves!!!! Heat yes; naked flames no!

[@frankfox4366]

Yeah Yeah. You have been outvoted years ago.

[@DrHarryT]

Scoring the aluminum when removing the white nylon layer is a no, no. Yes I have done industrial underground power vaults and you don't score the conductor with a blade while removing insulation.

[@LordLorenzo834]

Mr pedantic I don't know how you even seen that , a bit of scoring on the cable isn't the end of the world man

[@DrHarryT]

@@LordLorenzo834 Ot's a no no per electrical codes.

[@LordLorenzo834]

@@DrHarryT I know I'm an electrician , as long as the cuts are not deep and non of the strands are cut off thus reducing the csa of the conductor which is not gonna happen on cable this size, then it will be fine but I won't disagree with you that its a no no I'm just saying cable this size with a slight mark from a Stanley blade.. not really an issue is it let's use some common sense here

[@DrHarryT]

@@LordLorenzo834 It was well over 30 years ago and I was not actually making the connections but an observer apprentice, Working with MCM1000 AL they had specialized strippers that cut 95% through the plastic rolling it in a circle with end cutter set to the same to cut down the length of the cable so the plastic would easily peel off leaving the AL completely unscathed. The thing about AL is once you score a strand it creates a fracture point when you crank it down in the lug and the strands distort, it can cause strands to fracture/break completely through. AL it brittle like that. Of course you must also use Noalox as I recall.

[@frankweatherford6848]

Seriously! I built a few load breaks as well. Yes i saw a couple things i would do different but the teamwork housekeeping and attention to detail was pretty damn good. What stood out to me was when my man filed any burrs off lug after crimping. R That spoke volumes. I was trained by 3m and ive had to build these things in nasty paper mills and pwr plants. These guys are better than most of the shit sticks I left behind in contracting. I say if it passed high pot test and im sure it did then good job.

[@andyblackpool]

Very professional and neatly done job.

[@romeowhiskey1146]

You FLICK the switch... The LIGHTS go on! Good work, gentlemen!

[@asr1460]

Чудова робота! Молодці!

[@rajkumarponnuthurai9696]

Good job 👍 We shall take little more care when sleeving insulations and clamping. Thanks for the video.

[@andreymatuznyj1043]

Я думал, будет вторая серия, третья. А тут , в один ролик уложился ! 23 мужика , две недели ставят розетку ! ВЕЩЬ!!!😂

[@slesarg65]

У них оплата повременная, это они ещё на обед торопились!

[@user-sf2bx1dn3h]

Professional job well done

[@PATELHARSHOHM2693]

crimiping start always from bottom of lugs ....like this chance of cable to sleep downwards

[@SlickManChoux]

Good job guys with adequate toils il would be better

[@paolodolimpio1382]

Crimping the terminal directly on the insulator is an unnecessary risk in my opinion ... it could break !!! for the rest, great manual skills, word of an electrical technician

[@sumuduasiri]

Definitely. 🙏

[@blackviper7754]

So are you electrician?

[@paolodolimpio1382]

@@blackviper7754 Yes I am an electrical technician and I have worked with terminals up to 30KV I have never crimped directly on the insulator above all in glass or porcelain where breakage is at high risk

[@johngy6296]

@paolo D'Olimpio - I thought the same thing. I’ve seen plenty of cracked bushings cause ground faults, spectacularly.

[@powerupminion]

I'm an electrician and I work with 10 to 20 kilovolt cabels. This is how not to do it. In fact, I will show this to my colleges and we'll have a laugh over this! 🤣😂 This is a very good example on how not to do. 🤦🤦‍♂🤦‍♀ Update: We all had a laugh! 🤣😂🤣😂🤣😂🤣😂

[@popiszo9367]

😋

[@Boraxo]

Did you use a dull axe to cut those holes in the clamp bracket ?

[@JustBadMeAndI]

No, they seem to have burnt the holes with a welder

[@YobaGirl]

Во дела, даже инструкцию прочитали.

[@КонстантинАлёхин-д2х]

Даааа, я обычно инструкцию читаю когда что-то не получается. Школьники наверно работали.

[@rondeal3823]

Fellas. Think about your eyes . You have flakes of aluminum flying. We always wear eye protection . Especially when cutting wire with saw.

[@Mabreujf]

Trabalho bonito e profissional. Parabéns a toda a equipe!

[@kishanwagh5090]

Wel-don sir very Good work this is perfect work so as experience this work moer infortant

[@lizhageman5457]

Good work! Big cable, compared to the physical size of the transformer. 500 kcmil @ 13.8 kV, corresponds to 10 mVA?? Transformer seems smaller.

[@almosthuman4457]

its nice to see someone doing things the right way in one of these videos.

[@patrickd9551]

If you want right, you better watch other channels, like jointech cabling. As for the issues: They didn't apply the proper torque spec in the end and they scored the conductor, as you can clearly see around the 9 minute mark.

[@alvaromachacon6317]

Excelente presentación muy buena gracias

[@MoritzvonSchweinitz]

How come they applied (dieletric?) silicone grease to the contact area? Shouldn't grease be applied after making the contact crimping?

[@AndyIsHereBoi]

I assume they do that to slip the bigger piece over?

[@DubJay]

My best educated guess is that it's to mitigate oxidation inside of the crimped lug.

[@Grimnarg]

An amazing RTX 5090 power cable connecting!

[@panoramicview698]

Good job. So many unhappy people here seeing work being done well

[@mmasif7364]

Thank you😍

[@user-nh2ol5us2h]

интересный вариант полупроводящий слой ножом снимать так бывает на одном кабеле из 100 и не нужно говорить что это только на импортных , так же там инструмент нужен

[@AraCarrano]

How to derate the line by scoring the outer row of conductors. @ 9:00

[@TheHatton7065]

Looked like it was done by the bloke with the conduit cutters. Not good

[@phonkyfeel1]

Doesn’t that cause resistance/heat and worse? I am taking my first electronics class.

[@FOH3663]

​@@phonkyfeel1 It can yes. You just want symmetry in everything ... it can create a failure point.

[@psychiatry-is-eugenics]

Wonder if there is a better way to do that

[@FOH3663]

@@psychiatry-is-eugenics Just have to be more careful when initially using the cutters ... they dug in too deep. You want to remove the last few mm of material carefully by hand.

[@atnstn]

Respectable professionalism. Reall enjoyable watch.

[@harunkioko]

I specialize in this! Only minor errors but congrats.

[@prkumarr]

In skilled workers! 😮

[@Карачун-е4п]

-Эх! желтой изоленты чуток остался. -Ничё, растянем как нибудь.

[@user-vi3go1vq7r]

Изолента не правильная.Должна быть только синяя😂😂😂

[@FOH3663]

I can smell that "grape" semiconductor from here.

[@karl7796]

You kicked the aluminum conductors with the conduit cutters when you removed the inner insulation layers and you should not use retractable blade cutters on HT cable, there are special knives for removing insulation. Did you put dielectric grease on the TX stems before putting the boots on?

[@xaxabdo]

Where is the QA at!

[@schamberlain1]

They probably don't even have multilins or sweitzers on the high voltage side.

[@karl7796]

@@schamberlain1 I should have said nicked the conductors, but that is what happens if you use a stanley knife to cut through the outer layers. We use to use venitian blind cord to cut through the outer layers, the friction cut through the plastic layers with out damaging the copper conductors.

[@XREXP0]

This looks like a dry climate

[@HighestRank]

@@XREXP0 It is dry, and so they don't have horizontal venetian blinds, but the vertical ones with a stiff staff to open & close them.

[@janeli5725]

Nowadays, there is no need for stamping pliers on the terminals. It is safe and fast. Also, the protective cover is not very good if it is heated by fire. Now there are terminals that do not need to be burned. Just put it on and it can be used.

[@juanpablorestrepo5540]

Excelente trabajo 👏🏻 👍🏼 💪 pero algo muy importante los EPP Elementos de protección personal ✅️

[@chevypu4]

I'm not really qualified to question anything but wouldn't a heat gun be safer than risking frying insulation from the cables?😮😮

[@nb117]

Excellent professional installation.. Good Job!!

[@BarfusWOW]

not really - no safety glasses at all anywhere.

[@oldtimer2192]

The cable clamping bracket was pretty average!

[@ZloySok]

Странно что при таких сечениях кабеля точка контакта совсем маленькая, там где гайка.

[@Grishagin1997]

Это высоковольтка там и не нужно большое сечение, там токи очень маленькие, а вот 0.4кВ уже нужно больше сечение из-за тока

[@legendarniyMichail]

Сечение выбирают исходя из патерь. На длинной линии прийдется переразмерить сечение что бы снизить потери. Иначе ПБВ не хватит и напряжение будет сильно зависить он нагрузки. А гужоны в изоляторах бывают разными здесь видно что тр-р не сильно мощный.

[@СашаТолмачевец]

Да многое странно! Зачем высокую сторону подключать таким большим сечением провода?, если исходя из расмеров тр-ра, то его мощность не так велика. Еще обратил внимание, что когда закроется крышка, то клеммы окажутся совсем рядом с нею. А заглушки на клемах, это так себе... всёже 14 кВ.

[@Grishagin1997]

​@@СашаТолмачевец расстояние там позволяет, у нас ячейки открываешь и сразу ВН стоит и кабель, и расстояние 10см, про RM6 молчу там еще меньше места, до крышки ячейки, все же нагрузка там есть, по высокой максимум 70А, ТР на видео примерно 1600А по низкой это в районе 2312А

[@СашаТолмачевец]

@@Grishagin1997 И тем не мение, там сечение минимум 300 квадрат, и на ток в 70А? Ну да ладно. Как говорится, хозяин-барин. А вам спокойной ночи!👋😉

[@brettvanwey9419]

Y’all did good until you took off the vinyl insulation and went too deep, putting a deep nick in all the outer conductor strands.

[@rajeshs4447]

Don't put silica grease on conductor,

[@rogerdodger3477]

I know right? Doh!

[@VijayaTala-o3j]

Nice 🎉

[@tomwright3390]

Nice work but please wear safety glasses especially when using a Sawzall to cut wire!

[@Alsifer12]

why did they lubricate the exposed part of the cable with silicone this will worsen the contact

[@alexs2778]

It's probably has dielectric properties so when tightened IF any is between it shouldn't effect much, on the other hand it should provide waterproofing, oxidation and maybe lessens the chance of arching (not sure how effective on high voltage but on main breaker panel thin layer on rail contacts might prevent arching when breaker is installed in that spot..

[@LIVE-dm6rc]

All the beauty got ruined at final thanks to those damn groundings. Great job anyway 😉

[@bstelectronics9627]

Before applying silica grease.. Should be rubbed with smooth sand paper on grey layer

[@donniedollarhidejr.2766]

No, you shouldn't. One little scar on the dielectric layer and bye bye termination.

[@remist]

why

[@TheGodpharma]

How do you know which cable is which? They all seem to be identical.

[@SteelersNSalsa_deMex1co]

I service this kind of stuff, my cup of tea.

[@ZulqurnainAbbasi-i5w]

Nice work all brother

[@mohammadhoseinghadirzade-mo3fu]

👍👍👏👏بسیارعالی

[@murtazahussain5371]

i have question do we use phase sequence on Higher side of transformer like in this case he didnt use any sort of color for different phases.

[@zgrad2008]

Больше всего мне понравилась идея надеть на контакт "Y1 конденсатор", выполненный в виде внешнего черного корпуса. Вот так и нужно заводить электричество на дачу и в квартиру, т.е. с использованием конденсатора в месте контакта ввода. Не силен в физике, но по-моему по проводкам заземления из кабеля будет уходить на землю вакуум через конденсатор. Было бы любопытно измерить емкость между кабелем и заземлением, наверное ~2nF.

[@solvated_photon]

4:05 it’s better to start tape wrapping at the bottom and move up towards the top. This way each wrap covers the top edge of the last the way that shingles do and help prevent water getting under the tape.

[@franciscorafael7975]

Que mala onda de TODOS LOS COMENTARIOS, de repente todos son INGENIEROS, yo creo que son puras mulas, BONITO TRABAJO. ✔✔

[@kouamekouakouraphael9402]

❤❤❤ Super

[@KonanNiankoun]

C'est très bien

[@RajinderKumar-xr5he]

Why you have not filled gap between lug and adaptor. this may create partial discharge

[@tatangsumarna3850]

God job brother and bravo every one amin❤

[@Alfirr]

Hello! If I understand correctly, you work in oil production. Are you connecting a control station and a step-up transformer? If yes, then compliance with safety regulations is at a low level ... You work at least - without a protective helmet, goggles and gloves...

[@florovallesjr9088]

Different from what we learn during our training in raychem

[@delicious_seabass]

Three guys to do a one man job an the rest sitting around watching.

[@inq752]

imagine the GDP growth

[@restorerestoration4705]

lubricating contact joint is priceless 🤦

[@NeverTalkToCops1]

Plus the box cutter technology.

[@BramBiesiekierski]

My favourite was the clamp/strap that secured the cable in. It looks like they drilled the holes by shorting it out on a car battery.

[@BramBiesiekierski]

At 0:51😂

[@novielynlabitoriavlog]

Done watching po sr ingat po

[@noahautumn7611]

Nice job💡

[@jensschroder8214]

Medium high voltage of 13.8 kV. They do a good work

[@NoneFB]

Does the opening at bottom get closed off or can any animal build a nest/home up there?

[@ilovepizzadoyou]

This is why Pakistan has no running electricity...

[@mdshamimhowlader7308]

good job 🇧🇩🇧🇩🇧🇩

[@vikashvikash6346]

Ram ram Asif ji 🙏🙏

[@dolkong_1049]

꼼꼼하게 설명 잘해주시네요

[@christopherleubner6633]

Excellent work. It might get a fault but it sure AF isn't going to be the primary feed connection 😎

[@patrickd9551]

You sure? Did you see them apply proper torque on the bolts using the proper tool? Did you not see the scoring of the outer conductor @9:00? I sure as heck did not. So if you please, would you guide me to those missing pieces?

[@Milten130]

@@patrickd9551 also resistance to ground is not important there, they can just go by with crusty torch cut metal pieces

[@patrickd9551]

@@Milten130 true story: I went to an outdoor lan party back in 2000. Big army tent, diesel gens, etc. The power was ..... bad. Loads of parasitic voltage through the earth lead. So we all tied our computers to a piece of UTP cable and wrapped it around a couple of tent pegs. Then through the magic of powerstrips, all our computers were all cross-connected to many small grounds. It was enough from getting us zapped by our own computers tho, as stupid as it looked.

[@GauravSharma-kn3fh]

why did you cut the sleeve from the adhesive coating side? and you need to use the tool for making cut on Semicon.

[@marciojose8993]

VERY GOOD,,

[@mjaved2978]

Knowledgeable able vedio

[@SaleemAhmad-dw7dw]

Very good job

[@emrahklc3391]

Thank you for sharing.

[@PplsChampion]

good cable music

[@adrianosantos9709]

Very Good....

[@HichamChahboun-yj8bt]

👍👍👍👏👏

[@Ogcbesty]

This is confusing and seemingly good

[@chinmayasahoo4805]

All protection is good but earth connection is best important part

[@campkohler9131]

Seeing workers struggling to cut big conductors with a recip saw reminds me of an electrician on another channel who uses a one-hand-held, cordless bandsaw that would make quick work of it. Buy one!

[@jasondsr.pillora968]

Good work.

[@josephsouza2160]

Excellent job

[@goodthinking3552]

Saudi electricity company 👍

[@doglover5461]

nice video boss