MN82 370 SINGLE SPEED GEARBOX INSTALLATION.

Single speed gearbox installation with 6 reduction gears and a DSPower 31t 370 motor.
HW 1060 shp.ee/yobldc3
NEEBRC TX/RX shp.ee/fhh7uwf
HW external BEC shp.ee/z7aod82
2200UF Glitch buster shp.ee/ntnpoit
Single Speed Gearbox shp.ee/lx0lfi1
DSPower 370 motor shp.ee/7bde0go
6 gear reduction shp.ee/mauuelb (Select the 77 rpm, 6v so you can get the 6 gear reduction)
Tiger 3s Lipo shp.ee/20bvkv2
You can also follow my FB page at share/LCy126...

[@rcsbyrich3035]

Great work 👏.

[@Violator-RC]

Thanks.

[@jercsgn]

I can't help but notice the mouse pad. Ganyan yung isa ko bago ko palitan ng Naruto. Nice video bro.

[@Violator-RC]

Salamat sir. Medyo madumi na nga dahil sa mga super glue at grasa hahaha.

[@ideanet1156]

❤️

[@xda1ex626]

Ordered mine to to long ago can’t wait

[@Violator-RC]

It's going to be worth the wait.

[@daijoubu4529]

Buddy, could you tell me what is the motor driver on the MN82 stock ESC/receiver? I saw TA6586 on the MN9x/MN78 board, is it still the same? It's the DIP-8 ICs next to the motor connector. Trying to figure out the max amp draw I can safely pull through the stock electronic (datasheet says 5A continuous and 7A max but may need heatsinking on the motor ouput legs)

[@Violator-RC]

Not really sure about the technical side of the stock elecs but I know a lot of people using 370 motor with the stock elecs.

[@daijoubu4529]

@@Violator-RC is the markings on that 8 pins black chip TA6586? I just saw a review and it can handle 3-4A with ease woah, I'm gonna add a little heatsink on it

[@Violator-RC]

@@daijoubu4529 Yes. just to ba safe put some heatsink on it.

[@gglltech6675]

good job sir

[@Violator-RC]

Thanks.

[@MH4family]

among the first to upgrade mn82

[@rcflashcars]

cool vid! big like! 👍👍👍

[@Violator-RC]

Thanks.

[@samajier2566]

Great,,,

[@Violator-RC]

Thanks.

[@rafiqinherman8718]

How did you mount the gearbox to the chassis,, Did you make a hole in the chassis?

[@Violator-RC]

The gearbox is just mounted using cut outs of old cards that I have then zip tied into place.

[@daijoubu4529]

I plan on just doing just the metal gears swap and 370 motor swap, on the MN78 apparently you want medium speed 16.5k RPM on 2S with 1:35 reduction to get same speed but more torque? So on the stock gearbox with 1:18, you'll need 8500RPM to keep same speed

[@Violator-RC]

It's better to use the lower rpm to get better speed modulation and you'll get a bit of torque but not that much. To get a good amount of torque we need to use this type of single speed gearbox.

[@daijoubu4529]

@@Violator-RC more parts to buy lol, this new hobby is an endless sinkhole haha

[@Violator-RC]

@@daijoubu4529 I know. But it's a major part of the hobby modifying stuff to make it work and it's really fun.

[@timmyjackson6918]

Nice 370 motor to the reducer. I have a MN390 20T motor in my MN99S on a 2 speed and it keeps destroying all my gears😂

[@Violator-RC]

Oh man, that sucks if it keeps doing that. 390 is probably too strong for the gearbox. I have the 380 and 390 and a 55O in stock right now.

[@vincentboiles7872]

May I ask how did you customize your bedliner?

[@Violator-RC]

I painted it matte black then applied clearcoat to it.

[@vincentboiles7872]

Thank you sir, we have the same Rc very helpful videos. I hope to see more videos of MN82 and ur upgrades

[@Violator-RC]

@@vincentboiles7872 I have an upcoming videos for this. I'm going to make a mits alloy canopy for this and I'll be converting the rear to oil shocks. I'm just waiting for the materials.

[@vincentboiles7872]

@@Violator-RC do you have link where I can buy those parts?

[@Violator-RC]

@@vincentboiles7872 I'm going to create the mits alloy from scratch using styrene plastic.

[@Fortes_RC_Adv]

Nice video😉💪✅️ I'm still waiting to receive mine😪

[@Violator-RC]

Thanks. You're going to love it, it's worth the wait.

[@daijoubu4529]

With the ESC in the passenger side, you're just missing a flux capacitor now :D

[@Violator-RC]

That's a good idea. Maybe I'll make one haha. I couldn't figure out where to put the elecs since they no longer fit underneath.

[@reyjr3608]

Amazing..Do you feel the big difference after upgrading it?.. can't wait on your test drive video..😎👍 To be honest i don't know much about upgrading..just wanna ask,,u change motor for more power..gear for more torque..and that thing u do on interior is a receiver or esc that control and manage everything with better response in performance of the car..am i right here so far ?..or is it that control the power steering?

[@Violator-RC]

Thanks. I have the same setup with my c24 and there's a massive difference in torque. You can do slow crawl over obstacles with minimal effort. I'll be doing a test run this weekend. The external BEC is just there to make sure the servo gets a stable supply of power but you don't have to worry about it since most ESCs have built in BEC.

[@reyjr3608]

@@Violator-RC do you still using the original esc,or did you replace it?

[@Violator-RC]

@@reyjr3608 It has been replaced by HW 1060.

[@reyjr3608]

@@Violator-RC hw 1060 so that what it is..an esc..thanks,I think I got most of the item you mentioned in this video..may I suggest u put list of parts that you using in the video description,for a quick review check,for beginners like me..thanks a lot, please keep it up on your updates.. cheers 😄👍😎🚗💨💨

[@Violator-RC]

@@reyjr3608 Will do. I'll update the description.

[@CustomRcGarage]

👍

[@Violator-RC]

Thanks.

[@reyjr3608]

May i ask some links or website to order the parts..so i can try do like you do,if u don't mind..im excited about this upgrades..hope you can do test Drive video soon..😎👍😄🚗💨💨

[@Violator-RC]

shp.ee/rqqsxj8 here's the link for the single speed gearbox.

[@reyjr3608]

​@@Violator-RC thanks ..how about the parts that you do at the interior?is it a set with the motor? Or is it the original stock circuit?

[@Violator-RC]

@@reyjr3608 shp.ee/okqb4mw shp.ee/dierg2g

[@reyjr3608]

@@Violator-RC thanks.. how about the power steering?..what you called it?..do you change it too?

[@nbfisherman3760]

I love thoes tires where can I get them?

[@Violator-RC]

It's an Alf extreme tires, it's available on our local shopping app here in PH. It's an Indonesian made tires.

[@brianhawkins866]

Are those 1.55 wheels ?

[@Violator-RC]

It's an unbranded rims and I think it's 1.33.