MNG - Mechanical Zero Point Clamping System for Machining

Flat zero-point clamping system
-- 30mm high
-- hardened and ground
-- wear resistant
-- resistant to chips
Solid mounting bolt Ø40 h6
-- high insertion force and rigidity
-- Adapter centre in vice Ø25 H7
-- Pull stud compatible with the leading zero point clamping systems
Precise & simple
-- Repeatability less then 0,01mm
-- Insertion force 20 kN
- Height Tolerance +/ 0,005 mm
Mounting options on the machine table
-- with 2 M12 dowel screws and 2 M12 bolts
-- 2 screws M12 with precision tenons
-- with alignment and centring set with
-- round brackets
4 x 90° Indexing
-- with pins Ø12m6
-- Centric vice ZSG mini
-- Single vice ESG mini
-- Pallets and Tables
Mechanical clamping
-- Torque 30 Nm
-- 1 clamping screw
-- Wrench size 8
Exemption
-- easy cleaning
-- high rigidity
-- resistant to damageung

[@kevinp860]

bullshit stats .....work in the real world ........

[@新新朱]

less than 10s that's what I want. you don't know how heavy the vise is if you move 100 times a days

[@MrDan12585]

where can I find model ZSG 4 WNT for Solidworks ??

[@WNTtv]

Hello Daniel, The 3D model data will be available in the near future. In the mean time you can check out the following link in order to view and download the 2D drawing and look up the necessary values on our online shop. You can also find via this link a download of our Workpiece Holding Brochure which also contains all the information you will require. www.wnt.com/mastertool/?fcode=m_ca_bd_catdetail&m_ca_bd_GV_objky=80878026&L=1 .

[@hisanthu]

How much it cost in india

[@user-fw1go1qm5x]

Не согласен! А саму систему тоже нужно время, чтобы смонтировать! А это ещё дольше!

[@max-hk1mr]

Так её нужно смонтировать только один раз

[@robertkieronczyk7331]

dajcie chlopu wkretarke za 200 pln to sie nie nakreci tym imbusem biedak

[@robertkieronczyk7331]

ale zydy