Adding To The Lineup!

[@bcanvidsc2898]

Zach I Subscribed to Over 40 Channels Here on youtube but watch maybe 3 of them and yours is at the top i'm no farmer thats for sure was a Custom Cabinet Maker For 15yrs Know i Run my own Handyman Small Engine Repair thing LOL But Just wanted to say Thank you for all you do so many people have no idea how much farmers impact there lifes.. Thank you!

[@MillennialFarmer]

Thank you!!

[@edflynn533]

(

[@rickbarrows3100]

Same here I'm not a farmer but I enjoy your show and am glad I found you : )

[@leashufelt4489]

Millennial Farmer l

[@danievanvuuren8978]

Is iet true your an actor

[@dustinlowry9075]

I’m a John Deere tec out California that leak is coming from that seal on the transmission. No you don’t have to split the tractor take the bolts out drive Cupler and ring around the drive cupler slide the shaft out and remove the seal Great video

[@codyheitmann6989]

Yep exactly what needs to be done. Should only take a few hours to do.

[@RD_5572]

Lower the oil level which will stop it leaking...

[@nitrohaas9640]

Richard Ditchfield 😂😂😂😂

[@agger838]

So its hydraulic oil? From the trans? No special deere tools needed?

[@Frankie431]

Richard Ditchfield if they drain the oil, it wont leak.

[@joekostynuik3327]

When you have techs watching and giving you professional advice, that's outstanding. Good on that John Deere guy from Cali. Keep up the great videos.

[@Cannibal440]

4:20 "They're on rolling wheels". The best kind of wheels IMO.

[@billwhitman1529]

I'm sure I speak for all of your viewers when I say that we have the very best wishes for you Dad's speedy recovery. Like several other channels, your dad has added so much to the quality and content of your videos. He and I are about the same age and I have appreciated how he has embraced the changes you have brought with your management.

[@John-ot8rw]

Please never stop doing the "you ok?" bit. Its just too good and somehow it keeps getting funnier!

[@michaelwood5327]

Zack , I watched you & Randy when they were putting in tile. You were talking about waterways, when I was a kid I asked Grandpaw about why the waterways were so wide. He said son it will not take any kind of a farmer to make a ditch, but it takes a real farmer to farm one that was 60 yrs ago & I still remember it.

[@scotth8892]

Can’t wait for harvest season

[@wheezingbigfoot8335]

Same here love seeing all the diffrent combines people use

[@cindyevans5429]

Me to !!

[@paulpence8895]

If you're jones'n for a harvest fix watch the Western Kentucky, Montana and Canada channels!

[@jeffb321]

Im pumped too but we have a lot of down corn here in central iowa. The big farmers started some corn last week but he just have 5 days of straight rain. Im curious to see if any of the big boys around here are running any X9s

[@D2O2]

Love the seamless integration of the tracks Deere pulled off....you would never know it used to have tires.

[@pumptruckjim]

When I saw the chip bag on the ground I thought , I really hope that bag is O.K. Whew, glad it was.

[@williamb8415]

Your very lucky what a great farm you have. There is no end to the challenges each day presents but the rewards for that kind of life style are immeasurable. You appear to clearly enjoy what you have and care for it with great pride. Great farm, family and lifestyle you are so lucky.

[@jamesingamells4783]

It’s great to see Jim more seems like he is getting a lot more comfortable with the camera!

[@kopenhagenkid]

Great video Zach u have a great looking newer track tractor

[@stubbi]

Nice to see that the Mandako is still around. And congrats on the new tractor!

[@anthonybanda8192]

Nice purchase that 8320 is nice and clean . Adding another tractor gives you more options and backups in case of breakdowns . A good auction find like that is very welcomed over the cost of new .Nice video stay safe and farm on my friends !

[@plakeplays6420]

How did I get this lucky where I just finished my zoom call and 10 seconds later an amazing new Millenial Farmer video has appeared?

[@gamingdude3925]

Incredibly lucky

[@plakeplays6420]

i also think that this is my 9th heart from him. Loving the videos!

[@jasonsfarm37]

Plake Plays that’s even more lucky

[@gamingdude3925]

@@plakeplays6420 oh nice

[@oe542]

Clearly evidence that God exists.

[@gmanfatman]

It is nice that your Dad is doing ok

[@ryanwhitmore3650]

Hey Zack, I am a big fan of your channel! You and Becky do a great job putting a too notch program together. I am not a farmer, but grew up on a small farm and I love seeing how you use technology in your operation! Keep up the good work!

[@lrb8907]

I was thinking to myself, "Man, Jim sure has to put up with some sarcasm on that farm." 45 seconds later, Zach - "How are those tires and zerks looking?" Jim - " Like tires and zerks!" He belongs right where he is.

[@MillennialFarmer]

🤣🤣

[@alexmikhael5061]

yea he fires right back more times than not!!! :) LOL

[@Jack-ne8vm]

Seinfeld write a script !.. Cue cards & all.

[@jrich8112]

I truly enjoy these videos. Takes me away from NY and lets me live a life that I only dream of.

[@johnsona1315]

Leak just looks like it’s the IVT Input Seal/O-ring. Roll the torsional damper in flywheel out to get that input hub out. Couple hour job not too big a deal

[@griffendenys7468]

Good luck with your harvest this year. We were lucky enough to start on our beans today I’m watching this in the field right now

[@davedammitt7691]

"Can't seem to get the dentist taste out of my mouth". Well, that should have given you a pretty big break on the bill.🤔😂

[@MillennialFarmer]

🤣🤣 dangit, I walked into that one!

[@ronniejenkins2056]

@@MillennialFarmer lol

[@mk4gli389]

This might just be the best comment I’ve read on KZbin.

[@RD_5572]

That’s what she said

[@ThomasR119]

Millennial Farmer the only way to get that taste out is beer!!!!! lol

[@brittblanton8342]

Hey Zach thanks for the great video, looking forward to harvest. Hope your Dad heals up good take care and stay safe 👍

[@gordonhoffman8003]

Zach, check the blinker fluid in white lightning!!!!

[@davidl.miller8168]

Prayers for Nate the OG for a speedy recovery with no issues. Also what does the new 8320 RT do for the future of the 8260 R? Love seeing a modern farm continuing to build a better more efficient farm. Nice to see Jim talking on camera more. Great Job guys!

[@marshalloquinn5758]

We just bought a 2019 9570rt yesterday

[@philjeglosky3252]

Great video Zach, one of your best in my opinion. When you fired up white lightning the look on your face is priceless, my wife and I laughed out loud at that one, thanks and best wishes for the upcoming harvest!

[@MillennialFarmer]

🤣🤣 thanks for watching!

[@shoey5406]

According to jim's tee-shirt, he knows quality machines

[@LNFFTW16]

And that’s why the tractor is leaking.

[@Winton209Dubtown]

I work for a almond and sweet potato grower in California and I will love to have a boss like u keep up the good work and best wishes for you and the family

[@robbiebowie6505]

You should get a T shirt that says “Keep it between the rows”.

[@rogerpattee7666]

Zack, Old retired (Baby boomer) Police Sergeant here. Raised in Minnesota, live in Georgia now. Was from Buffalo, my wife and daughter are interred in Rockford. Daughter passed due to a Pulmonary Embolism, wife passed due to Colon cancer. Their ashes are interred next to wife’s parents. Enjoy this channel, been catching up on the videos. Thanks for posting them.

[@troyp467]

Me: immediately checks to see where Mandako is from. Realizes it's from my home province here in Manitoba 🇨🇦🇨🇦🇨🇦

[@redmanoutdoors9632]

No they’re from the boarder of China 😂

[@j_d1480]

He's from Manitoba??

[@mynamenowhastobeasecret.2079]

He’s Canadian?!

[@j_d1480]

@@mynamenowhastobeasecret.2079 He must've moved when Trudeau got into office

[@troyp467]

@@j_d1480 what does everyone mean by he's I was talking about Mandako the company or am I missing something?

[@farmingthingslevibaggensto8920]

Well prayers towards your dad hope he gets better soon!!

[@8thGenerationFarmer]

Really enjoying the extra Jim appearances lately. “Looking like tires and zerks” lol!

[@redmanoutdoors9632]

There has been many times in life where I wished I had the life of a dog... seems so peaceful and simple.

[@jeremyo3072]

“I can’t seem to get the dentist taste out of my mouth.” I’ve found that a quick swish and gargle of your favorite beer fixes that.

[@celli2191]

Wishing your dad a speedy Recovery and just good luck to Jim

[@bgood424]

Should get “Thunder” ceramic coated to keep er looking good and make it easy to keep clean

[@14Marathons]

Zach, I hope your Dad's knee surgery went well and he heals quickly. I've had 2 knee surgeries and I can say the key to a quick recovery is Ice Ice Ice... Thanks for your channel and video.

[@defeatthesheep5738]

Do you still have your 8260r? Haven't seen it in many videos recently. Love your videos as well! Keep it up!

[@pauls4460]

Prayers for your dad's quick and complete recovery! If Anna is going to chase tractors for all of harvest, you may want to check her tires. That's gonna be quite a few miles for her.

[@phil6012]

I can actually smell the bin as I'm watching the video.

[@keithwestbrooks8629]

Nice addition to the farm. Hope your dad is doing well and look to see him back soon.

[@KoJo-qh9od]

Tell Dad not to push his recovery because failing to let it completely heal can cause a lifetime of issues.

[@southjerseysound7340]

True but it's not easy keeping a farmer down at harvest time. But with today's electronics I'm sure there's something they can find for him to do while keeping off of it. Although he might have a fishing pole with his name on it at the amazing new house of his.

[@katrinpitman4260]

I mean like I guis you could let it heal?

[@derrickw7253]

Hope your Dad has a speedy recovery! Blessings from us in NC.

[@alexmendoza4072]

Your new fuel trailer is so nice 💯 makes me want to buy one even though I have no use for it 😂

[@john34261]

you could built your own vehicle around it and have a mobile fuel car though it'll be diffecult to built a fuel vehicle around a fuel trailer so maybe built one from scratch

[@brucehobbs1734]

Trying figure how to tow it behind my fifth wheel.

[@jim7273]

The best to your Dad! Hoping for a speedy recovery.

[@computerman9971]

Actors have to have good teeth.

[@farmshoffman8475]

Hope ur dad has a good recovery, god bless , nice new to u ride , love John Deere ,

[@Verminator-kj5kq]

It’s never good when the chips are down this close to harvest.

[@brendanhayes2752]

Great channel, my wife grew up on a farm in North Dakota. Loved the beans from your shoe going into the hopper!

[@johnsebar7807]

see you don't have the belt covers on yet. guess there is never an end of the To Do list.

[@satnambawa0711]

This is brand new for u. Realy it looks like new . Congratulations

[@maplereyfarms8515]

When is Jim on a podcast?

[@carpentrylover145]

You and your dad are so organized and you keep everything in tip top shape. I don't farm but I have the same mindset. Don't ever apologize for being fuzzy 👍👊

[@Chase-tx7zi]

Last time I was this early I caught Santa under the tree

[@cameroncarley7958]

Unrelated but nice KZbin account picture

[@johnbrownell7657]

The horizonal belt under your bin discharge MUST BE COVERED. You got two beautiful young girl and your son I hate to mention the terrible heartbreak we would all suffer if they ever got hurt. Your raising money for bin safety but sometimes it starts right a home. Keep up the great videos. I apologise in advance for pointing that out

[@tomekprusinowski4793]

Poland farmer Tomek greets 🇵🇱👍

[@tbrule.4877]

Hey zac when we clean the bottom of our bins like that instead of using a grain shovel to push into the sumps. Buy a plastic snow shovel it's a lot wider and will push more beans at a time. Works great for us.

[@TheReddeaddavis]

Nooooo you don't have to split for that input seal just pull the dampener and flywheel one of the easier seals to change on a deere

[@MillennialFarmer]

Good to know, thanks!

[@TheReddeaddavis]

No problem Zach I'm sure you and Jim could handle it

[@northeastnebraskafarming117]

Exactly every dealer tries to say that! But my cousin who used to work for deere knows that too!

[@TheReddeaddavis]

@@northeastnebraskafarming117 I spent 7 years at a Deere dealership in texas I'd rather give the farmers some knowledge instead of them wasting money on a fix at a dealer they could have done themselves

[@johnnyjoejimbob]

Congratulations on the new tractor Zach!

[@TheGhostOfLuciasClay]

At one point out looking at combines and then instead buys a tractor because maybe a 9x combine demo was offered?

[@anjaandmichael]

Hey Zach, not that you will read this however a little pro tip on plastic ties. If you take linemen pliers and twist them off instead of cutting off, you won't have any sharp edges. I didn't learn this until late in my lifetime but definitely protects from those sharp edges! Love your videos!!

[@CraydenGamingOfficial]

I'm getting eye surgery on Monday and I'm 14 I'm nervous

[@justindefontes645]

Hey Zach I love watching all you’re videos on KZbin and Facebook and I love hearing you on your podcasts,keep the American dream running brother

[@dieselkidclayron1064]

Me: Playing farm sim and buys a 4440 Zach: WE GOT A BRAND NEW 8RT

[@Adam11B]

I wish I grew up on a farm and this was my life. Seems very fun and rewarding.

[@RockBrigadeCommunityForum]

yes and i bet the debt is a riot every year.

[@Adam11B]

Getner Done it’s not about the money for farmers, it’s a way of life

[@lonestarstate4x4liftedlife66]

I thought I saw the Frito Banditto slap those Doritos out of you’re hand lol.

[@queticomoe4495]

I'm looking forward to seeing you again soon, Mr. Johnson. Happy healing!

[@andrewlanman1709]

Zach:. It was made on the boarder of... Jim: China 😂😂😂😂😂😂😂😂😂😂😂😂😂 Best part of the video

[@MillennialFarmer]

🤣🤣

[@scottmcfarland1177]

If all you put is 100 hours on the tractor no doubt the seal is gone they can dry out pretty fast! An old John Deere mechanic told me once if an engine has been sitting awhile to turn it over backwards to take the burrs of the crank shaft! Nice tractor you got!

[@Finn_7050]

So you have 3rt tractors now

[@MillennialFarmer]

We do

[@_lucas_1k_]

@Millennial Farmer Next up is an rx 😉

[@Finn_7050]

🤣

[@mr.notsure9679]

Can't wait to sit in my chair and watch you work hard harvesting all of those beans and corns.

[@airbrgr]

So sad to see the bag of chips catastrophe. "ya okay, ya alright?"

[@rgj5832]

One of the most awesome shops I have ever seen!! Wow!

[@n3qdz]

"I can't seen to get the dentist taste out of my mouth".......things you may hear from Monica......oh did I say that out loud?

[@MillennialFarmer]

🤣🤣

[@ThomasR119]

I was waiting for “that’s what she said!”

[@derekanderson3710]

Wishing your dad a very speedy recovery!!!

[@cbdsw]

Jim is a good guy to laugh at those terrible jokes.

[@Swarm509]

Jim is one lucky farm hand, all sorts of new toys to play with!

[@remmiemax3624]

MASK, I don't wear for the "virus" conspiracy BUT wear one for dust in the bins!

[@jdpower5552]

Remmie Max I can’t imagine working in a bin w/o a mask, I always wear one

[@waterskiingfool]

Nice new tractor addition. Crops are looking good.

[@AASparkChaser]

30 degrees here in the Thief River Falls, MN, area on Wednesday morning (September 9th). Heavy layer of frost on everything. Corn is turning white. Soybeans are turning a pale green color.

[@yorleyovalle7618]

Another great video enjoy them all ..best wishes to your dad I know how it feels to have knee surgery

[@ginggur17]

Sending best wishes to your Dad.

[@ROCK-s1t]

Hope your dad is doing well can't wait to watch harvest videos

[@purplerunner1715]

Wish your dad a quick and full recovery.

[@midwesternhooftrimmer6735]

Hope your dad has a speedy recovery! I've had a knee reconstruction and it's no fun I'd rather poke myself in the eye with a fork then go through that again... although I've never poked myself in the eye with a fork so I really don't know how that compares LOL

[@robertreznik9330]

I grease my coulters every 40 hrs but just with 2 or 3 shots so the seals are not get disturbed. My combine cost $10,000 for the rear engine seal and drive coupler, hope yours is less. In Texas our forecast for the rest of September is mostly 53 in the mornings and 83 in the afternoons because of our almost 4,000 ft elevation. Our starch line is halfway to the cob or 3 weeks to blacklayer . The kernels are much longer because we use hybrids that fill during 1400 GDUs after silk to make 300 bu/ac. with 31,000 stand. We fill the heavy kernel in the time it takes for your crop to go from knee high to frost. Keeping the plant health to the end is our secret.

[@allisencarlson1560]

I worked pretty darn hard on that! Thank you!!

[@trewevenson701]

Hey I cleaned that 8320 up for the auction. Things in great shape.

[@joedennison2972]

Thanks for speaking about crop status, what to look for, and how the business end of farming goes

[@lonepine5596]

Best wishes to Nate for speedy full recovery 🤗

[@tonymckeage1028]

Great Video, good to see the prep for harvest coming together

[@darrenlieser6627]

Thank you for purchasing Graco product, which is manufacturer in Minnesota.

[@MichaelJones1527]

Sorry to hear about your dad's knee operation. I'm recovering from quadruple bypass surgery myself. It's tough getting old, kee your dad healthy.

[@tompreiss5010]

I like how you show everyone we're you get the deference in flavors between farm's in beens.

[@johnnyfeathers2567]

Harvest is almost upon us..can’t wait!

[@TerrellSpivey]

Congratulations on the new addition to the family!!🚜💯💪

[@wiscojoe_ggg3449]

I just love all the green tractors👌