This is the blueprint for my 07 ex. It's my work car/spl toy. Thanks for the inspiration
@datboii37562 жыл бұрын
Your build is crazy clean I want to mod my civic too it’s a sedan and damn bro you motivated me to make mine clean too even if it is a base model, keep the great videos up :)
@FA5JOYE2 жыл бұрын
Cleanest R18 civic. ✨
@jarekmai3 жыл бұрын
RIP FB6 :( Buddy club was on my civic. Keep da vidz up!
@eliezergutierrez24722 жыл бұрын
Very clean build. It makes me want to mod my LX Sedan even though it's an auto.
@blueeberrycivic2 жыл бұрын
I have a friend that has a 2012 sedan lx auto and he modified his. Sure you’ll be seen as cooler if you drive a manual but how I look at it is, it’s really the same thing the car is go to get you here and there. It’s really not that much different after you drive manual for awhile.
@HrothgarOdubhghaill2 жыл бұрын
DO IT!! Haha...I have an 09 EX sedan Auto, and its fun...Ive got a Takeda Stage 2 Cold air intake, and the Megan Racing front strut bar currently (Still slow work in progress) and its loads fun...Just sucks theres not more aftermarket support for the non-Si sedans.
@zach2830 Жыл бұрын
@@HrothgarOdubhghaillbe careful with that intake, my engine stalled in rain once and you can hydrolock easily if you’re lowered
@HrothgarOdubhghaill Жыл бұрын
@@zach2830 I've had it on my car since 2018, driven through more than a dozen rain storms...snow, everything. Made a 7000 mile road trip with it and ive never had an issue.
@diamondgamez_81123 жыл бұрын
i love your build bro, i really want to convert my base model 07 to something like yours
@blueeberrycivic3 жыл бұрын
you should if you really enjoy it! they are great daily drivers! I have been modifying mine for over 4 years now!
@b58daddy2 жыл бұрын
Bro the 06-08 front end looks better imo don’t think that ur car is gonna be cooler with a face lift just cuz it’s “newer” like nah it’s personal opinion, color matched hfp lip with the Sti lip under on my 06 civic looks too clean
@b58daddy2 жыл бұрын
Buuuut if u honestly prefer the 2012+ front than that’s all u
@kevinwhiting83912 жыл бұрын
Yeah the 0607 and 08 Civic Coupes look the best
@300crownsol2 жыл бұрын
Do you have a link for your Sti and Hfp lip?
@Solidongo Жыл бұрын
Fg2 goes crazy
@Jay_edwin2 жыл бұрын
Super nice build big bro! I have a 2011 LX that I bought last september at bone stock, and i’m mid build. I’ve added fog lights, rain guards, a 10” screen, an exhaust, and some yellow calipers. Question. Do you think it’s worth getting the Hondata Flashpro? Did you see any significant changes to performance? I’m questioning picking one up, since it’s an LX, and not an SI.
@gabrielalfaro8153 Жыл бұрын
i have an ex and asking the same in how will the hondata will perform
@nvslee12338 ай бұрын
Nice vivid. Btw where did you get your center caps for the Enkei RFP1? I have the plain black logo. Yours is more clean, thank you
@blueeberrycivic8 ай бұрын
From 2013 Honda accord wheels
@HrothgarOdubhghaill2 жыл бұрын
Where did you get the little corner window block offs (By the rear view mirrors)?
@MadHouseRetroGaming15 ай бұрын
im picking up a 07 coupe lx next month. can you tell me what front bumber mod you have is?
@michaelpowers33852 жыл бұрын
How did you redo the headliner? Did you pull it out? Mines been sagging and I've been looking for ways to redo it.
@Garage-97 Жыл бұрын
Looks really nice bro!
@notyouraverageiz55528 ай бұрын
can you send the link for the body kit you used ?
@zuesballer39682 жыл бұрын
Send me a link to the brake lights I want to buy some the 3 or 4 blink brake lights?
@Drew.gm032 жыл бұрын
Where did you find the front end and the body kit men ?
@Reallycoolpopsicle Жыл бұрын
Where did you buy your wheels?
@Noahsanchezfx2 жыл бұрын
So did the bumper just clip right on or did you need to make mounts?
@blueeberrycivic2 жыл бұрын
They fit right on you just need the grills and such
@edduproducers8242 Жыл бұрын
Thank you for all the imfo I will orde that bodykit any link?
@derickperez5669 Жыл бұрын
Do you still remember the links to the whole front end of your Gen 8 bro? I want change the whole look from headlights-bumper!!
@blueeberrycivic Жыл бұрын
I just bought everything from eBay or used on Facebook marketplace
@GShock1012 жыл бұрын
Nice looking ride. Have same car . What’s the wheel setup. 17x9 ET 35? Did you have to roll/pull fenders?
@blueeberrycivic2 жыл бұрын
the rear is 17x9 +35 and the front is 17x9 +22 so it is easier to clear the brembos
@GShock1012 жыл бұрын
@@blueeberrycivic if you did +22 all around would it be too much poke? I’m ready to pull the trigger on 17x9 +35 all around on 215/45. “They say that’s flush”. Are your rears tucked alil ?
@JeLifeCoach2 жыл бұрын
@@GShock101 id imagine hella poke and you would need 2 camber bolts and -2 camber all the way around but that’s just a guess. I hope the OP responds. By my measurements that over 1.25 poke from stock and I dont think there is over an inch of clearance from OE wheel and tire setup.
@GShock1012 жыл бұрын
@@JeLifeCoach ok Thankyou for the info. Well I ended getting the Kansei tandems In a 18x9 +35. 215/40. I’m hoping for the best!
@JeLifeCoach2 жыл бұрын
@@GShock101 let me know how it goes brother! I hope it fits and looks awesome!!!
@villain70783 жыл бұрын
Do the acuity bushings make a noticeable difference?
@blueeberrycivic3 жыл бұрын
Yeah I would say so especially the shifter bushings
@asvpbrian32582 жыл бұрын
Hey wassup what did u remove from the si I want to do a rear brake setup like yours since mine is an lx
@blueeberrycivic2 жыл бұрын
I took the whole spindles.
@he4rts2 жыл бұрын
yo bro where’s you get the grille from? i can never find that grille for my 07 i guess it’s a 09-11??
@blueeberrycivic2 жыл бұрын
Yeah I had gotten mine from eBay
@r.ramirrrez2 жыл бұрын
Did you roll your fenders? And if you did was it a difficult process or how do you do it?
@blueeberrycivic2 жыл бұрын
I did roll the fenders it wasn’t all too hard but if you have never done it before it is a little discouraging, but my best advice would be to go slow and if you feel you’re gonna crack the paint use a heat gun
@Jonhitemup Жыл бұрын
Where’d u get ur headlights
@blueeberrycivic Жыл бұрын
I took the oem one’s apart. But I think they sell similar ones on eBay
@andrewcarter94263 жыл бұрын
where did you get the lip from
@blueeberrycivic3 жыл бұрын
ebay the seller was baysonr
@tonyvasquez64912 жыл бұрын
All in all how much would u say u got in to the car minus how much the car cost you
@blueeberrycivic2 жыл бұрын
Around 4-5k
@MiguelRodriguez-ms8wo2 жыл бұрын
Hey bro just saw your video im late af but what tire size you have iknow u dont have the car no more
@blueeberrycivic2 жыл бұрын
235/40r17
@gothinking37052 жыл бұрын
Was the rl or tl brembos easy what all do you need
@blueeberrycivic2 жыл бұрын
mine are TL-s brembos it depends how good with tools you are if you are good with them its easy if not not so much you need the brembos rotors and pads as well as a 5mm spacer that will be needed behind the rotor. you will also need the caliper bolts since the stock ones on the 8thgens are smaller and you will have to drill out the knuckle to 9/16 and cut or bend the heat shield. i dont have it done but i would recommend doing the TL-s master as well. I think that should be it.
@Loweredlife193 жыл бұрын
Do more videos bro
@welcometotheflesh6424 Жыл бұрын
It's very clean .. but I will never understand why someone would take the time and money to do this to any model Civic aside from the Si
@j.23919 ай бұрын
Cuz is cheaper and just does it for fun
@_ColeJackson_8 ай бұрын
Maybe can’t afford a civic si and making a car look good has shit to do with model many have no car key people take pride