Modding my TM680 | with PC Plate | Sound Test

[@andreminderico489]

Hello! Great video! I'd advise everyone to open this keyboard from the top rather than from the bottom side, just use a plastic pick or credit card to separate both housings, take your time doing this so you dont break any plastic along the way, and you should be good. This will mainly help those who own the tri-mode model, as the switch that allows you to choose between modes, can easily break when opening this keyboard from the bottom. Really recommend this one for begginers who want to get into modding, you'll have some challenges along the way, but those will prepare you for reality if you decide to step into the rabbit hole!

[@trashgarb]

Great video! Love when keeb tubers put their misfortunes in their build videos. I like seeing how people get around those roadblocks. Subbed!

[@ricecloud]

Thanks for your input! 🤍

[@Ceeme]

I love how cozy this video feels ☺️

[@Warliege4400]

The keyboard sounds pretty damn good

[@therealdeemz_]

If bandaid holee doesn't work, try clear tape. The fibrous nature of the bandaid might make the stabs mushier

[@ricecloud]

Yes indeed, you are absolute right. I heard of ptfe tape and might test this out :)

[@anumnum2012]

Thanks when I use bandaid the sounded mushy

[@xianead18]

@@ricecloud it really will be mushy at first. holee has a break-in period :)

[@VectorTheRobot]

@@xianead18 it does? When does it break in

[@xianead18]

@@VectorTheRobot mine breaks in after about a week or so. But i do spam the mods for around 10 mins after modding to break it in faster

[@chikushouuu]

this seems like such a tedious process. props to you for filming it all! i will definitely refer to this video when modding in the future. just one question: where did you get your lube from? thank you so much!

[@ricecloud]

Thank you! I hope it will be helpful! I bought the lube on AliExpress. I don't know if it's legit or not (I bought it from a vendor with the most sold lube). I would suggest it to buy it from a official keyboard online shop if you can.

[@chikushouuu]

@@ricecloud oh, thank you! i was just curious since im trying to keep my stuff as budget as possible and reduce shipping expenses. thanks again

[@AlpBozo]

I recommend novelkey, I found it very trust worthy

[@lix299]

I’ll also refer to this vid when modding

[@Yakig40]

I do this all the time for fun it’s a very satisfying process but extremely tedious and frustrating at some points

[@sushiro6714]

i love your videos

[@ricecloud]

Aww, thank you! Glad you like them 🥰

[@metalbeast8427]

This was the most relaxing keyboard video I have ever seen I love the vibe and the keyboard sounded super impressive I'm subbing!

[@ricecloud]

aww, thank you so much! glad for this feedback!

[@metalbeast8427]

@@ricecloud I've watched a bunch of your other videos after that and they have all been so cosy and relaxing I love how you mix keyboard modding with a vlog style video It gets the viewer even more interested and invested in the whole process and I think its really cool

[@ricecloud]

@@metalbeast8427 Thank you so much for another feedback! I highly appreciate it!

[@Poppyiey]

You're so underrated I love your videos

[@ricecloud]

Thank you, that really means much to me! 🥺

[@maryisineffable]

thank you for showing us what can go wrong with modding lol and for the good vibes while doing something stressful-ish, youve given me motivation to try my first mod! >.

[@mycommentwilltriggeryou9810]

8/10. Really amazing keyboard.

[@AinzVinarao]

Great video! I also love your desk mat, it's so pretty!

[@ricecloud]

Thank you 🤍

[@notane.real1]

One of the best budget custom Keyboards rn

[@chd1233]

just a tip on removing tm6680 stabs, if you were to mod the board, you can remove the stabilizers last from the back of the plate. just push the lips then push. Way easier than removing it from the front.

[@ricecloud]

Oh that would have saved me a lot of pain ._. Thank you! Will test it in the future!

[@netherouss2892]

this is literally my dream keyboard lol, when i start building it im definitely going to come to this.

[@koshpien]

This is literally the best run-down on how these mods are done, thank you so much for sharing!!

[@jar-jar1335]

the thocc is unbelievable

[@themarcazard]

Lol decided to mod your keyboard in the middle of the night. I felt that. End result is so good for all the effort 😁

[@ricecloud]

thank you! x)

[@deadniell]

Wow, it's nice to see a great production in a kinda small channel. Subbed

[@ricecloud]

Thank you so much!

[@baumi_nya9286]

just found ur channel and already fell in love with ur videos! great job!

[@ricecloud]

Thank you so much! I was kinda scared making videos, but thanks to you and many others, I feel more at ease, because of all the sweet comments. 🥺

[@baumi_nya9286]

ur doing an amazing job so don't worry and keep up the good work :)

[@ricecloud]

@@baumi_nya9286 Thank you 🙏🏻

[@HAPPY47738]

It’s like typing on a crayon. Good job and nice keyboard

[@Michael-mm2zm]

Loved the sound of the keeb!

[@theweebnextdoor_official]

uwahh how do you have such little bit of subscribers??? your videos always have such a cute and pretty aesthetic and everything looks so nice and satisfying ;o; also the keyboards are great its like asmr

[@ricecloud]

Aww, that’s really sweet, thank you so much 🥺. Feels great getting acknowledged for hard work. I love watching calm and aesthetic videos on YT, makes me happy that others enjoy my content as well. 🤍

[@theweebnextdoor_official]

@@ricecloud no problem! your content is always so nice, you deserve so much more recognition :33 also im not sure what tme it is for you right now but happy new years :>

[@ricecloud]

@@theweebnextdoor_official thank you so much 😭 happy new year! ✨

[@itssuperbaby2979]

I love this vid! its so helpful. fav vid on ur channel by far

[@ricecloud]

Thank you!! I might do another video where I talk abt mech keebs in general. :D I am not an expert, but I do really enjoy this hobby and want to provide information, which would have help me getting into this hobby easier and quicker. :3

[@itssuperbaby2979]

@@ricecloud Thank you so much! That would be so helpful! I am not experienced in this hobby either but I really want to know more about keyboards. As usual, keep it up!

[@mcv1159]

underrated nice keyboard

[@emilieduran1553]

if I ever mod. my own keyboard, I will follow this video exactly

[@trappedintheshawdowrealm441]

i know nothing about keyboards i dont know why i am here but i will say everything is very ✨aesthetic✨ (especially the wow duck at 10:55)

[@ricecloud]

Aww thank you so much! 🥺

[@quixoticduck]

I can't believe that I didn't notice the duck until I read this comment

[@SimplisticVR]

Underrated, i subscribed!

[@ricecloud]

Thank you so much! Appreciate the support! 🥺

[@metchim2381]

Your keyboard sounds heaven to me... hoping i can make mine thocc like that someday :(

[@roroman1132]

I bought myself a pair and i really needed help thanks!

[@musicIistener]

Thank you for sharing!! I wish I had the money and time to do something like this myself i would love a softer keyboard ;__;

[@Siderea]

Oh!! I have those same keycaps for my current board. They're so pretty~ I love how the TM680 looks though. I definitely want to get it in the future and will follow your similar modding steps for the board. Hopefully I don't break any of the little pins when opening the case though, that's my only fear!

[@ricecloud]

Just be more careful than me x) I had to open the case so many times and it was in the middle of the night so i was tired and my patience was just gone at that point :c so I am sure u won't break them, even if you do it's no big deal! :3

[@qsrey]

omg....i melted on the sound test

[@fflow_wolff]

good music & aesthetic vibes ✨🍵 what more could i ask for 😴🎧

[@cinna.mo0n7]

Your video made my brain go quiet for a bit, it was really nice thank you c:

[@keeptaiwanfree]

omg HAHAHA before this video I got an ad for MOD pizza. that’s so funny

[@barqiify]

Thankie so much. I learnt alot from this video. like using pens to bend the wires! Never thought about that! great tips and tricks imma gonna try out now~~~~ thankie thankie

[@likhithbijin8284]

how to describe this level of satisfaction ?

[@rogerducrin]

:o i love u ur like a lofi wildcat!

[@southx9655]

WOW that keyboard looks so COOL! also this was so relaxing to watch I almost fell asleep 😂

[@mustard8714]

Loving the build! Keep up the great work. Where'd you get the polycarbonate plate? Do you have any idea if there's one for the RK84 from Royal Kludge?

[@ricecloud]

Thank you! You can find the link where I bought the board and the pc plate in the description. I got it from AliExpress. Unfortunately I don't know if there is anyone who sells pc plates for the rk84. But maybe just search for it I think I heard from a company who does that on demand.

[@berri488]

the thocks 😩

[@matixfn8684]

sounds really good

[@notvoidz]

ah was waiting for this

[@ricecloud]

Hope you like it, let me know if there is something unclear, or something I can improve. :)

[@cottontails]

was hoping for a before and after sound test with the pc plate

[@humayraphul1913]

10:56 Keyboard sound test🪐

[@maxtoosick]

this video go hard asf 😁

[@carson6188]

sorry i know I'm pretty late but if you were using durock plate mounted stabs only thing you need for it to sound nice is dielectric grease and that's it. durock stabs require less modding or else they'll get stuck, i learned from experience f

[@ricecloud]

Hi, thanks! I know that there are better plate mount stabs options, however I want to mod the stock stabs on my budget board for people with a tight budget, so they can see how the modded stock stabs can sound like after the mod (and if the mod is worth it). :D

[@sparkly9294]

Oh hey I ordered one of these super cheap and it should come in soon

[@-1nfinite]

sounds so good

[@CleavingGold]

Your videos have such a great vibe! I have a question about the colour of the case - is the pink more a "warm" pink (eg slightly orangy salmony) or a "cold" pink (slightly magentaish or lilacish) in real life? Or is it neutral? Your videos have tempted me to get this keyboard but I'm not sure if I should get a pink or a white, since I'm not sure if the pink will clash with the colour of my favourite pink keycaps.

[@ricecloud]

Thank you! Sorry for the late reply. I don't want to give wrong information here, but for me the pink is more towards neutral pink, looks like a pale pink if that makes sense.

[@Mxriz]

Oh 🥲

[@sator6754]

4:34 We eatin stabs tonight

[@ricecloud]

Dinner is served ✨

[@gamezforever7652]

u are so skill full keep the good work

[@ricecloud]

thanks!

[@yumikotus]

she starts typing at 10:56 😌✨

[@ivey7416]

Do you think that, given all the mods you did, using tactile instead of linear switches would still give a really similar sound while typing? Thanks :)

[@miggydimayuga6020]

u make good keyboards ngl

[@ricecloud]

Thank you :D

[@miggydimayuga6020]

@@ricecloud np :)

[@Angxlic2]

I wanna buy that 😢

[@selenarivera3160]

I neeeeeed this keyboard

[@ramkumarram1326]

girl, your video was so clean i thought you had like a 100k subs bro, sad!

[@ricecloud]

Thank you so much! I just hit 1k and for me that is already insane >//

[@ro-ro8uq]

ughhh that spacebar 😩

[@who4mi853]

lovely video, i've been watching every single one of them since i found this one. how's the keyboard holding up after a few months? i've debating between TM680 vs Feker ik75 for my build, what's your opinion?

[@ramkumarram1326]

cleannnn

[@user-id4zn7mn9y]

Very nicely done, may I ask what you use to edit your videos?

[@ricecloud]

Thanks! Of course :) I am using vllo for editing and cutting and procreate for my thumbnail and animations and such

[@SnurtleLive]

Amazing build! I've been watching for a while now and I just was wondering if you have any tips for editing (other than having a good camera to start with) since your vids are so clean and nice. Thanks!

[@johnedwardl.gaspar7978]

i think you've put too much fabric tape in your stabs that's why it got mushy. i experienced the same before. as you can see, you had troubles putting it in the stem. just try to put moderate amounts in it enough to cover the lower contact points. but man, those gaterons are fire

[@ricecloud]

I did this mod before on two other stab sets and I had no issues at all. But maybe the holes are a little bit smaller :o

[@grandsonnnn]

i shall attempt, to recreate this t h o c k y keyboard.

[@blackink4554]

What ballpens are those you just gave me an idea on how to balance wire more budgetly

[@ricecloud]

those free ball pens you get as a gift from company

[@lynnezqo]

deskmat from where?? omg!!!

[@JacquesDupuis]

Amazed at your work. Good deed. Do you sell some of your mods?

[@ricecloud]

thanks! not yet, but pretty sure that i'll sell some at some point

[@lix299]

does the tm680 come with stabs ? I have to build a keyboard after I saw your "creamy" vid with this keyboard lol.

[@ricecloud]

Yes it does come with stabs :)

[@edgehy]

why this video want make me sleep at 16:00 pm? 😴

[@RyanJacob2007]

im in love with you i didnt know i use use pens for wire balancing im so stupid

[@ricecloud]

naw you are not dumb because of that!! :o

[@sally6779]

This is so pretty! I was wondering if keycaps that are shaped this way have a specific name? They look so aesthetically pleasing

[@jowsey.mp4]

The profile is like the XDA profile. It is a flat profile, and this set uses its own profile.

[@sososleeepy]

Its so pretty and sounds so nice! I really want to get this keyboard, but I'm super bummed there's no print screen key. This may be a dumb question, but is there a way to switch what an individual key does? Like could I change one of the side three keys to be something else? ❤

[@ricecloud]

i haven't heard of the option to remap the keys on the tm680 unfortunately :c

[@dinosaur_186]

Can you make a review video about AKKO ACR 68 PRO?

[@ricecloud]

hey, I don't think that i will make a review on the acr 68, however i did make a video about the acr pro alice plus, i think build wise, they are very similar.

[@dinosaur_186]

@@ricecloud Ok, I will wait for your video.\(ϋ)/

[@gustavomarrara9660]

Hey.., great video… what can you tell about the key mapping software? Is is flexible? Best

[@mycommentwilltriggeryou9810]

The Thocc

[@tom-liu6658]

Hello, my friend, I'm a manufacturer of tm680. Thank you very much for purchasing my keyboard, but you removed the shell in the wrong way, so the column broke. The correct way is to remove the upper cover first, then unscrew the screws of the iron plate, and then remove the iron plate and PCB. This is the correct way

[@ricecloud]

Hi, I am not sure if I understand you correctly, but there is no way to open the upper case, without removing the screws from the trays first. The plate is clipped into the the inner edges of the upper case and the plate is screwed onto the trays. In order to open the keyboard, I have to remove the screws first. I would say that the pins are not even necessary in order to hold the keyboard together, the screws are enough imo, so I don't really mind :)

[@miriamgomez275]

Amazing.🤓🌟🌟🌟🎉💯

[@OnlyRay777]

I know I’m really late but I’m wondering if u can try SA and ASA keycaps cuz I wanna see the difference to know which to get

[@meme.traveler]

Yoo Rice! Uhm i have a question, is the keyboard Good for minecraft?

[@iBosoms]

Noice.

[@kelseymariah2257]

where did you get the polycarbonate plate from? im having troubling figuring out which one to get so if you dont mind telling me id appreciate it!

[@alianablaise]

Hello! I keep wondering, by gateron black do you mean the black ink v2s? Im not sure what switch that is specifically because i saw yellow huhuhu It sounds so good!!! 🥺

[@ricecloud]

I mean the normal gat blacks (translucent top and white opaque bottom housing to be specific) :D

[@elfondo5291]

Very nice videos.

[@ricecloud]

So glad for this feedback 😭. I did put a lot of effort into this. Thank you so much 🙏🏻 but please let me know, if there is something you are missing or I could have done better.

[@toastie1631]

Hi! Can I ask what the outer sleeve of the coiled cable is? 🥺 I am looking for a baby pink one just like yours🤍

[@canespace4260]

so we all get random urges to mod our keyboards in the middle of the night LMAO i modded my old keyboard at 2am the other night

[@vip-jad6821]

If I want to put gateron milky yellows in my rk61 should I lube it and no I don’t have to desolder it because I have the new version

[@ricecloud]

Yes! I would definitely lube them!

[@vmloose]

Where did you get the pc plate? Is it custom made? Cannot find it anywhere :o

[@ricecloud]

The link where I got it is in the description. Got it from a vendor on AliExpress

[@vmloose]

@@ricecloud ohh sorry i'm blind... Also, forgot to say, love your videos keep up the good job, they're very relaxing, often watch/listen to them while working :)

[@ricecloud]

@@vmloose No problem :D Aww, that's nice! Thanks for the love 🤍

[@hpreads2617]

Save button please

[@carlos6457]

just curious, what is a pc plate? by the way great video! really enjoyed it :D

[@ricecloud]

PC is just short for polycarbonate. The plate are holding the switches in place and can be made of different materials like pc, aluminum, fr4, pom and so on. The material of the plate can change how a keyboard sounds. Plates made of pc makes the board sounds deeper, whereas alu result in higher pitched sounds usually. But not only the plate can alter the sound, but other components as well.

[@carlos6457]

@@ricecloud ohh alright

[@ricecloud]

The plate also changes the flexibility of a board, but only really matter with gasket mount

[@chewyro_chewyro]

Heyyyy I really need to know where you got your cute mousepad puhleasesee thank you!

[@ricecloud]

Hey :) please read the description under "products"

[@anumnum2012]

6:24 it doesn’t, same thing with the foam mod because only if your board is thick you need to add foam or tape to decrease hollowness, this one is thin so you don’t need to add foam or tape

[@ricecloud]

Can you elaborate this more in depth as why dampening thin boards has no effect? Also what do you mean by “thin boards” exactly? (case thickness? Angle/height of the board?). I am pretty sure that damping a case will always has an effect. I just had eva foam, but silicon would be even better to fill the spaces. Especially cases made out of thin plastic with much of room, sound really hollow imo. As for the tape mod: I think it is not the main goal to reduce hollowness but rather than alter the sound of the board. By taping the pcb, a louder, poppier or/and thockier sound can be archived. Reason is probably (I am just guessing) the sound waves getting filtered in a certain way (maybe higher frequencies don’t bounce back, or go through the tape again, resulting in a more deeper sounding board. I did some research before uploading this video, but ofc there can be still false information. So I highly appreciate if you correct me :) nevertheless I am pretty confident about my statements.

[@anumnum2012]

If the case is too thick it will sound hollow, adding foam and tape decreases hollowness and make the board sound deeper or thockier

[@anumnum2012]

It won’t make a big difference if your board is thin

[@anumnum2012]

I think the tape and foam absorbs the vibration that the switches make

[@anumnum2012]

The tm680 is thin so the tape and foam won’t make a big difference, my board is about 10cm thick(I guess) so I added tape to decrease hollow ness

[@itssuperbaby2979]

I have a few questions about modding... What difference does the PC plate do to your board? (I have a tm680, but I can't seem to find just the PC plate itself...I can only find the one with the tm680 kit and I alr have the kit, so it will be a waste of money to buy another one. :c ) Do you have any suggestions for tape modding? im rly scared ill break my pcb but i heard a lot of good things about that mod. How are the stock stabs? Do I need to buy new ones? sry about so many questions, im a beginner to making keybaords and im rly lost :c But your videos helped me so much!! Thank you and keep up the good work!

[@therealdeemz_]

PC plate generally makes the keyboard have a deeper sound profile than if you were to use alu or brass, though I'm not sure if brass is even an option for TM680 Use painter's tape for tape modding, or use tapes that generally don't stick well/meant to be peeled. Most people already use painter's tape for tape mods, and it's the most advisable tape to pick, as clear tape or duct tape may result in varied results, or even damage Stock stabs of a keyboard are usually fine, though I have no experience with the TM680's stabs in particular. If you want to throw caution to the wind; buy Durock B/W/Pandas, or JWK/Everglide V3 Plate-mounts (they're the ones that are colored black, transp, or blue). Make sure for JWK/Everglide stabs that you find plate mounts though, as screw-ins won't work on the TM680 (also sorta applies to durock as they have V2's that won't work as they're screw-ins). And, as the Durock B/W/Pandas are more readily available, I recommend those. Durock or JWK/Everglide are generally trusted brands, and offer good bang for buck, as opposed to Cherry plate mounts, that often cost twice the amount Don't take my words as gospel; there's still a deeper rabbit hole to venture into in the custom keeb realm. But if you have any questions, there are many communities to accommodate you, we don't bite (most of the time)! And, if you have some extra questions, I might be able to answer them, though none specific to the TM680, as I personally have no experience, or have any plans of buying that kit for now

[@ricecloud]

No problem at all! DeemZ did already a very good job at providing you the information you asked for :D I used three layers of masking tape. Through the link in the description, you can buy the pc plate on it's own, but maybe the option is not available in your region? I think the stock stabs are ok. Since I never had really premium stabs, I cannot really tell if they are good or not. If you intend to holee mod the stabs, then I would use a thinner tape than I used in my video and maybe go for something with a smoother surface. Unlike the tape mod, you should use stronger adhesive tape for the holee mod, since the lube can mess them up if the tape is not strong enough.

[@itssuperbaby2979]

@@therealdeemz_ Thank you so much! that helped a looottttt

[@itssuperbaby2979]

@@ricecloud Thank you so much!!!!!!

[@ricecloud]

@@itssuperbaby2979 You're welcome :)

[@dividexthecantaloupe]

IPASSユーキャン1部なんでしたんです

[@SchwitzendeTaube]

WHERE CAN I GET A CUSTOM PLATE FOR THE TM680??? i really need a custom plate for the iso layout...its the only thing left for my dream keeb lol

[@vip-jad6821]

I see u getting popular

[@ricecloud]

I definitely got many subs recently. Really appreciate the support 🤍

[@kachcat]

where'd you find the pc plate version? having an oddly hard time finding it lol

[@ricecloud]

Hey :3 I put the link in the description

[@kachcat]

@@ricecloud aa tysm! i LOVE this board btw

[@Sergey_Sergeev]

What camera are you using to make this video? Thanks!

[@ricecloud]

iphone 13 pro