ModDiy 16pin 12VHPWR 600 watt Power Supply Cable for RTX 4080 / 4090

[@II-er7gj]

Can you do tutorial how to make DIY PCI-E cables that can withstand 600 heavy duty 24/7 crypto mining RTX 3090 and RTX 4090? please

[@raghufn5881]

You have to be trolling mining is unprofitable nowadays

[@II-er7gj]

@@raghufn5881 Mining is more profitable nowdays then ever! Especiallly woth 120 RTX 3090 ant 60 RTX 4090 and solar panels!!! ha ha

[@orion9k]

@@raghufn5881 Not if you have access to "free" electricity.

[@stephenspeliades2941]

Great video. I love tech people like me

[@ANRO_ANRO]

My card didnt boot..so what do i do i believe i have the same cables i ordered from Amazon

[@monokaya6254]

Did u figure it out? Mine not booting either, not even fan working, only logo light

[@sebastian_1569]

Remember to put ur monitor cable hdmi or dp into the GPU not the MOTHERBOARD

[@zexianglin]

❤❤

[@PilotWinks]

Yeah I tried to use this cable and my 4090 fans spin but the RTX lighting doesn’t light up and shows no signal. Not sure what to do

[@notworthit1096]

You tried using the original one?

[@PilotWinks]

@@notworthit1096 it was the MB.

[@notworthit1096]

@@PilotWinks oh damn bro thats not the worst but is bad. I currently finished my 1st build after owning 2 iBuyPower PC for less than a month both they had countless issues straight out the box. I finished my build last week and before the 1st boot I had to take it to a PC repair shop because it turned on and off. Turns out the case button was bad.

[@greymohan4370]

Is this the Corsair cable? Also can I use this CABLE on a c750 80gold Nzxt PSU?

[@Diplexsy]

Hey, I also just got these cables but my gpu is not booting, is there a specific port or way that I should be connecting them

[@notworthit1096]

It should be the VGA ports on the PSU so you would take 2 slots on the PSU just for the GPU. Hope this helps.

[@ANRO_ANRO]

@@notworthit1096well the adapter has 3 cables so why would you only use 2 ports instead of 3

[@notworthit1096]

@@ANRO_ANRO dual 8 pin to single 16 pin. Where did you get confused? Single 16 to the card dual 8 to the PSU. Thats how I have it on mines and no issues whatsoever.

[@ANRO_ANRO]

@@notworthit1096 yup based on what u said now it worked…i was confused on the connections the actual sketch or directions from the manufacturer did not say to plug it into VGA or SATA 6 pin but it worked on my 8 pin VGA connections and now its up and running..thanx

[@notworthit1096]

@@ANRO_ANRO perfect brother, glad you got it going. 👍🏽

[@freepalestine7405]

Can I buy a 8 pin cable alone??

[@HyoukaAnalystLore3452]

Ofc u can.

[@Zade_mm2]

HOW DO U INSTALL THESE

[@XAMPOL]

i'm sure u figured it out by now but the two split cables are the ones that connect to the PSU, and the single cable will connect to the GPU

[@Zade_mm2]

My pc came with them they were at the back and the back wasn’t coming off and there were like 10 extra screws in didnt get but i did and my gpu doesn’t open i cant plug nothing into it

[@northking2317]

can I use this cable for a 4070 ti? if not what cable do ı need for my sff case?

[@jackarrows1436]

Y cable male 12vhpwr, female 2 pins 8

[@biggunsone]

I tried using it on a Evga 850w, and it didn’t work…I think that some psu don’t recognize it.

[@michaelrad3921]

can you use this on a 7900xtx?

[@bingus5863]

Same question here. As far as I know it should work just fine as long as you’ve got 3 8pin / 6+2 pin connectors, as that many are required for a 7900 xtx. What you should be worrying about is whether the cables they have on their site are compatible with your PSU, but they should be as they have a wide variety of cables for different ones.

[@gojartdestani213]

@michaelrad3921 did it work? Because i also have a 7900xtx and would like to know before buying a psu

[@guntherschultz912]

It will not work, radeon cards do not support pcie5 pin connectors, just use the regular 6+2 pcie