Thank you for all your tutorials. I never get bored watching. You are very generous in sharing you knowledge and workflow. This is the best cinema 4d channel.
@polygonpen2 жыл бұрын
Thank you.
@Sjoerdish2 ай бұрын
This tutorial was extremely helpful to me! I'll consider the Patreon. Thanks
@alial-muslimany51122 жыл бұрын
WELCOME BACK, I like your videos before i watch them, thats how good they are & how good your content and teaching is, THANK YOU SO MUCH
@polygonpen2 жыл бұрын
Thanks Ali :)
@sleepingonthecouch952 жыл бұрын
I was on a very rush project when I'm still a beginner in 3D world. This tutorial saved me with the headache from UV unwrapping. You're the best sir. Bought all your courses and learnt so so so much from it.
@polygonpen2 жыл бұрын
Awesome, thank you :)
@mohammadyahya65112 жыл бұрын
Welcome back "KING" glad to know that you are good know.
@polygonpen2 жыл бұрын
❤
@IKC.2 жыл бұрын
Sağol Mert abi tek başına çalışan bir oyun yapımcısının yüzünü güldürdün 😃
@polygonpen2 жыл бұрын
Rica ederim :)
@IKC.2 жыл бұрын
@@polygonpen Plastik sandalye için video atarmısın.
@ridgi86052 жыл бұрын
I've done over 15 of your tutorials, and you're great at both modeling and rendering. You often use Octane as a rendering engine. For my part, I use Redshift, Corona or Cycle 4D. It's always a challenge to reproduce an image close to what you do. For the renders you do, I find Corona very easy to adjust to achieve similar good results. Once again thank you, and see you soon on PATREON.
@polygonpen2 жыл бұрын
Thank you Ridgi, keep going! also it is good to face some challenges sometimes, itmakes you better :)
@newtoxton2 жыл бұрын
Best work flow and modeling routine. Thanks Pal
@maciejschumacher35902 жыл бұрын
I am absolutely delighted by your tutorials. If I may have a wish, I would like you to show more examples of UV-ing in Cinema :) Many thanks!
@polygonpen2 жыл бұрын
I have one in my channel, you can check that out.
@oleksandrzymnytskyi58192 жыл бұрын
I'm glad to see the render Octane! And thanks for the tutorial
@mkenya_engineer2 жыл бұрын
Welcome back, have learned a lot through your tutorials
@buivantai32562 жыл бұрын
Thank sir
@GermanoHeitor2 жыл бұрын
You are a beast. Thanks for sharing your knowledge.
@romuk30922 жыл бұрын
Glad you’re feeling better now ! I love your tutorials keep them coming ! Do you think you could make a beer bottle modeling + render ( Redshift ) tutorial in one of your next video ?
@polygonpen2 жыл бұрын
Thank you, not next but I will try to do something similar in near future.
@YT-XD2 жыл бұрын
Incredibly !!! Big THANKs
@talhazulqarnain21262 жыл бұрын
Prayers For your Good Health ❤️
@pixym2 жыл бұрын
Hi, Welcome back.
@GrafDe2 жыл бұрын
Very nice tutorial and without much digression, some tell half of their CV and what else you could do instead of just going into the topic. Since tutorials are drawn out in length. I like your style very much!
@polygonpen2 жыл бұрын
Thank you very much!
@seyiolusanya21502 жыл бұрын
Welcome back!
@manhthoifplhn46153 ай бұрын
thank you
@samgames15642 жыл бұрын
Good work, thank you.
@user-bt7qt3og3g Жыл бұрын
best tutorial😭
@lisandromir2 жыл бұрын
i love your tutorials man!!!
@CubometrOTD2 жыл бұрын
Thank you! Best tutorials !
@Murathanaksoz2 жыл бұрын
"hot pixel" sıkıntısı ile ilgili tutorial yapabilirsen çok makbule geçer, kaçırdığım bilmediğim bir şey çıkacaktır muhtemelen sen anlatırken =) kolay gelsin
@polygonpen2 жыл бұрын
İlk defa duyuyorum, 3D ile alakalı değil sanırsam .
@faizcurious74072 жыл бұрын
Fantastic 😊👏🏻
@mikeligocki9089 Жыл бұрын
I enjoy your videos so much. I do wish you'd dive into Redshift. It comes with C4D and is so much more accessible than Octane. Besides, the whole Octane trend has come and gone :)
@polygonpen Жыл бұрын
Yeah, I get that a lot, thanks for the feedback.
@faizcurious74072 жыл бұрын
Keep my warm regards and bless 😍😊
@monirul3d Жыл бұрын
❤❤
@GeosCG2 жыл бұрын
Nice as usual
@davidlee98452 жыл бұрын
It's the best!
@hamedmansouri61442 жыл бұрын
great. Thank you. 🙏
@theshyyang65972 жыл бұрын
I don't understand material rendering, I hope to make a video, thank you
@sivakirubanandam26772 жыл бұрын
I like it!
@massivilopes2064 Жыл бұрын
Mestre...
@theentropeek2 жыл бұрын
thanks bro
@rob_visual11 ай бұрын
for some reason when I relax UV and his apply the whole UV map rotates slightly then the texture is all off. Don't know why. (EDIT: i fixed it I had to select the edges i wanted to cut before I unwrapped
2 жыл бұрын
Aksandan türk olduğunu anlamam :) Eline sağlık.
@HelenaKyle Жыл бұрын
New in your channel ❤
@polygonpen Жыл бұрын
Welcome!
@rehandx91322 жыл бұрын
Thanks for the great tutorials, can you please give me information about how I can get similar render in Arnold render, Because i don't have the octane render.
@polygonpen2 жыл бұрын
Thanks, they are actually very similar, try to copy what I did in the tutorial in Arnold.
@chweziFx2 жыл бұрын
Your videos are really so good , learning a lot . But How can I get octane renderer ,
@polygonpen2 жыл бұрын
Thank you, you nned to buy it or subscribe montly.
@emaeshka2 жыл бұрын
nice. like 100%
@TimandLauren Жыл бұрын
hey poly! what if in the Texture UV editor, i accidentally deleted the points i do not know how to get it back ?
@polygonpen Жыл бұрын
CTRL Z or you need to do it again unfortunately.
@basharalsorori54822 жыл бұрын
We haven't Octane Render.. Could you explain rendering by Pro render or physical renders.
@polygonpen2 жыл бұрын
These render engines are kind of outdated, I will be using external ernder engines, but the concept is the same, roughness, HDRI etc, you can apply them to standart renderer.
@NineStudioProduction2 жыл бұрын
Why I cant `connect object and delete in UV mode? Please help
@polygonpen2 жыл бұрын
There is no such thing in the UV manager.
@GranzDesign2 жыл бұрын
Hi, what is the key to de select a point? just a simple thing I can figure out. When im using rectangle selection, and gonna select another point, what do I press to de select the first point?
@polygonpen2 жыл бұрын
You can use E shortcut to switch to Move tool so you can select a point or more, if you press Shift, new selected points will add up to your selection, also if you press Space bar, it is gonna switch back to previous tool, so you can use rectangle selection and move tool easly by pressing Space bar.
@GranzDesign2 жыл бұрын
@@polygonpen May I ask for the F-stop/Iso and shutter you used for this scene?
@kuunami Жыл бұрын
Where does the image plane come from? Do you find them on the internet or create them yourself?
@polygonpen Жыл бұрын
I find them on the internet, usually on Pinterest.